PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200M
- 6ES7195-7HB00-0XA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7195-7HB00-0XA0 active backplane for two I/O positions
Siemens 6ES7195-7HB00-0XA0 is the BM 2 x 40 active bus module for one or two 40 mm-wide S7-300 I/O modules in an ET 200M station. It maintains the backplane connection when an I/O module is absent.
This is a backplane component, not an I/O signal converter. Removal and insertion during operation requires the documented station configuration; the active bus module itself must be installed with power isolated.
This is a backplane component, not an I/O signal converter. Removal and insertion during operation requires the documented station configuration; the active bus module itself must be installed with power isolated.
BEFORE YOU BUY
Confirm the active-backplane arrangement
ACTUAL APPLICATIONS
Where 6ES7195-7HB00-0XA0 supports serviceable remote I/O
Based on Siemens ET 200M configuration and installation literature, sections 1.4 and 3.5.4. Each scenario requires compatible 40 mm I/O modules and a validated station configuration.
-
01 · I/O MAINTENANCE
Keep other I/O reachable during service
In a station configured for module change during operation, the active backplane maintains communication to the remaining modules while an eligible I/O module is removed. The bus base itself must be worked on with power isolated. -
02 · REDUNDANT CONTROL
Support I/O in a dual-interface station
Siemens documents redundant ET 200M arrangements using two IM 153-2 interfaces. BM 2 x 40 provides the required 40 mm I/O positions beside the matching BM IM/IM assembly; verify interface and base compatibility. -
03 · DISTRIBUTED SIGNALS
Build a mixed input/output station
Use the documented active-backplane arrangement to mount compatible 40 mm S7-300 signal modules for distributed process inputs and controlled outputs. Select each signal module for its actual sensor or actuator circuit.
Technical specifications for 6ES7195-7HB00-0XA0
-
Product Model6ES7195-7HB00-0XA0
-
Product ParametersActive Backplane Bus Module
-
In stock1 unit
-
ManufacturerSiemens
-
I/O mounting positionsOne or two I/O modules
-
Supported I/O module width40 mm per module
-
Backplane continuityOther modules remain reachable when an I/O module is absent
-
Required mounting railActive-bus rail, Siemens 6ES7195-1Gxx0-0XA0
-
Bus-module installation stateDe-energized only
-
Vacant-slot protectionBackplane bus cover required on unused I/O positions
-
End-of-bus protectionBus module cover required on the last bus module
-
Mounting clearanceAt least 40 mm above and below the station rail
-
Rail protective conductorMinimum cross-section 10 mm2; low-impedance connection
-
Equipment enclosureHousing, cabinet or controlled electrical operating area
View all additional
Alternative Names
6ES7195-7HB00-0XA0
Siemens BM 2 x 40
ET 200M Active Backplane Base
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ET 200M ACTIVE BACKPLANE
Match the I/O width, rail and service configuration
Siemens 6ES7195-7HB00-0XA0 is the BM 2 x 40 active bus module for one or two 40 mm-wide S7-300 I/O modules in an ET 200M station. It maintains the backplane connection when an I/O module is absent.
Install the BM 2 x 40 on the specified active-bus rail beside the preceding bus module, with the adjacent connectors fully engaged. Use backplane bus covers for empty I/O positions and a bus module cover on the last base.
For removal/insertion during operation or redundancy, the complete station must follow the Siemens arrangement rules. Confirm the IM 153 variant and its supported module count; this bus base does not independently establish either function.
Features:
- Exact Siemens order code: 6ES7195-7HB00-0XA0
- Two positions for 40 mm-wide I/O modules
- Verify active-bus rail, covers and station configuration
The Siemens 6ES7195-7HB00-0XA0 BM 2 x 40 requires the I/O widths, rail type, bus connections and safe maintenance procedure to be confirmed before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Siemens 6ES7195-7HB00-0XA0 identifies the BM 2 x 40 base. Keep this complete article number in the replacement order; the BM 1 x 80 and BM IM/IM bases serve different mounting positions.
Record the existing I/O order numbers, position widths, interface-module version and active-bus rail. Inspect both connector faces, side guides, retaining features and the covers required for vacant or end positions.
Isolate the station before replacing the active bus module. Seat the adjacent connectors and I/O modules squarely, verify protective grounding, and check station diagnostics and output states before returning the equipment to service.
Features:
- Match the complete 6ES7195-7HB00-0XA0 order code
- Distinguish the 2 x 40 base from 1 x 80 and IM bases
- Check connectors, covers and de-energized replacement
The Siemens 6ES7195-7HB00-0XA0 BM 2 x 40 requires replacement verification of I/O widths, active-backplane connections, rail type, protective covers and the installed station before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Available Siemens document references are confirmed before order
- Software licensing and project backups remain the customer's responsibility
- Accessories are supplied only when listed in the quotation
Documentation for the Siemens 6ES7195-7HB00-0XA0 BM 2 x 40 must be matched to the exact article number and installed active-backplane arrangement; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size10.3 × 10.3 × 6.8 cm
-
Shipping weightApprox. 0.14 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8536690000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7195-7HB00-0XA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can maintenance replace the bus base while the ET 200M is running?
No. Siemens requires the active bus modules themselves to be installed in a de-energized state. The removal/insertion function applies to eligible I/O modules in a correctly configured station, not to live replacement of this bus base. -
Why can an 80 mm-wide I/O module not occupy the two 40 mm positions?
BM 2 x 40 is specified for one or two 40 mm-wide S7-300 modules. Siemens assigns an 80 mm-wide module to BM 1 x 80, order number 6ES7195-7HC00-0XA0. Check the installed module width before selecting either base. -
What must cover the second position when only one I/O module is fitted?
Fit a backplane bus cover to the unused I/O position. If this is also the last bus module, its end connector needs the separate bus module cover. Siemens lists cover set 6ES7195-1JA00-0XA0; confirm required covers in the quotation. -
Will this base latch onto the standard rail already fitted in the cabinet?
Only the specified active-bus rails, order-number family 6ES7195-1Gxx0-0XA0, accommodate these bus modules. Verify the actual rail identifier; a standard S7-300 rail is not evidence of compatibility. -
What output behavior matters when a replacement I/O module is inserted?
The Siemens manual warns that programmed outputs can become active immediately on insertion and that tilted insertion can affect neighboring modules. Follow the approved isolation and plant-safety procedure; set outputs to a safe state and seat the module squarely. -
Does fitting BM 2 x 40 alone make a station redundant?
No. A redundant ET 200M arrangement requires the documented pair of IM 153-2 interfaces, their compatible BM IM/IM base and the complete active backplane. This article supports the 40 mm I/O positions, not the pair of interface modules. -
Which dimensions should a panel builder use instead of the carton size?
The official Siemens catalog lists the bus module as 97 x 92 x 30 mm, with width reduced to 80 mm when installed. The catalog package is 10.3 x 10.3 x 6.8 cm; neither value replaces the complete station-depth and clearance drawing. -
How should an MRO buyer specify a bare-base spare without missing hardware?
Request the full 6ES7195-7HB00-0XA0 identifier and photographs of both connector faces and retaining features. List the number of vacant slots, required end cover and rail separately; I/O modules, interface modules and other accessories are not implied by a bus-base quotation.
READY TO VERIFY YOUR PART?
Get a 6ES7195-7HB00-0XA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
