PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-1500
- 6ES7511-1TK01-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7511-1TK01-0AB0 coordinates engineered motion tasks
Siemens 6ES7511-1TK01-0AB0 is the SIMATIC S7-1500T CPU 1511T-1 PN, a technology CPU with 225 KB of program work memory, 1 MB of data work memory and a two-port PROFINET IRT interface. The documented typical bit-operation time is 60 ns.
Extended Motion Control supports configured camming, leading axis proxies and kinematics. Select the technology objects, drives and encoders within the CPU resource and cycle-time limits; a compatible SIMATIC Memory Card and the matching engineering project are required.
Extended Motion Control supports configured camming, leading axis proxies and kinematics. Select the technology objects, drives and encoders within the CPU resource and cycle-time limits; a compatible SIMATIC Memory Card and the matching engineering project are required.
BEFORE YOU BUY
Size the complete motion configuration
ACTUAL APPLICATIONS
Where 6ES7511-1TK01-0AB0 coordinates machine motion
The Siemens equipment manual documents these extended Motion Control functions. Each scenario requires compatible drives, defined mechanics and a validated machine project.
-
01 · KINEMATICS
Coordinate a handling portal
Configure supported Cartesian portal kinematics to coordinate a handling movement through the technology objects. Check the mechanical axes, transformations and available extended resources before commissioning; travel limits, protective measures and a controlled test cycle remain part of the machine design. -
02 · CAMMING
Follow an engineered cam profile
Use the documented camming functions to relate a following axis to an engineered master-position profile. Select the cam representation and synchronization conditions to suit the mechanism, and include its resource demand in the project calculation before testing the movement at controlled speed. -
03 · CROSS-PLC MOTION
Share a leading-axis reference
Apply the documented cross-PLC synchronous operation and leading axis proxy to coordinate motion across engineered controller boundaries. Verify the supported communication, reference assignment and synchronous configuration together with the drives; matching a network connector alone does not establish coordinated motion.
Technical specifications for 6ES7511-1TK01-0AB0
-
Product Model6ES7511-1TK01-0AB0
-
Product ParametersMotion Control Technology CPU
-
In stock1 unit
-
ManufacturerSiemens
-
Program work memory225 KB
-
Data work memory1 MB
-
Typical bit-operation time60 ns
-
PROFINET interfaceOne X1 interface with two-port IRT switch
-
Permissible DC supply19.2 to 28.8 V DC; rated 24 V DC
-
Rated input current0.7 A
-
Typical power loss5.7 W
-
Motion Control resource pool800 resources
-
Extended Motion Control resource pool40 resources
-
Load memoryRequired SIMATIC Memory Card; maximum 32 GB
View all additional
Alternative Names
6ES7511-1TK01-0AB0
CPU 1511T-1 PN
SIMATIC S7-1500T Technology Controller
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SIMATIC S7-1500T MOTION ENGINEERING
Budget the configured axes and technology objects
Siemens 6ES7511-1TK01-0AB0 is the SIMATIC S7-1500T CPU 1511T-1 PN, a technology CPU with 225 KB of program work memory, 1 MB of data work memory and a two-port PROFINET IRT interface. The documented typical bit-operation time is 60 ns.
Extended Motion Control supports configured camming, leading axis proxies and kinematics. Select the technology objects, drives and encoders within the CPU resource and cycle-time limits; a compatible SIMATIC Memory Card and the matching engineering project are required.
The 05/2021 manual specifies different engineering requirements for firmware V2.9 and V2.0. Match TIA Portal and technology-object versions to the actual CPU, and check the configured motion cycle and all resource pools before commissioning.
Features:
- 800 Motion Control resources
- 40 Extended Motion Control resources
- Compatible drives, encoders and Memory Card required
The Siemens 6ES7511-1TK01-0AB0 requires the engineered motion objects and firmware compatibility to be verified for reliable system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Record 6ES7511-1TK01-0AB0 and its actual firmware before selecting the replacement. Preserve the controlled motion project, axis and encoder assignments, cam data and required software licenses. The current Siemens Mall lists this article as a PM410 cancelled product supplied as a spare part.
Secure the mechanism against unexpected movement and isolate power under the site procedure. Retain the identified PROFINET connections and SIMATIC Memory Card, check the mounting clearance and connect X80 only as shown in the applicable Siemens wiring instructions.
Before automatic operation, restore the compatible project and verify axis identities, reference positions, encoder direction and travel limits. Perform the required controlled motion test with qualified personnel; a T-CPU must not be replaced based only on matching program-memory capacity.
Features:
- Preserve axis and encoder assignments
- Check cam data and technology-object versions
- Test motion under controlled conditions
The Siemens 6ES7511-1TK01-0AB0 CPU 1511T-1 PN requires replacement verification of the motion configuration and mechanical limits before release for operation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Available Siemens document references are confirmed before order
- Software licensing and project backups remain the customer's responsibility
- Accessories are supplied only when listed in the quotation
Documentation for the Siemens 6ES7511-1TK01-0AB0 requires the matching firmware, technology-object configuration and applicable motion manuals; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size15.1 × 15.4 × 4.6 cm
-
Shipping weightApprox. 0.43 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7511-1TK01-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should different axis types be charged against the motion resource budget?
The 05/2021 manual specifies 800 Motion Control resources. A speed-controlled axis uses 40, a positioning axis 80 and a synchronous axis 160. Add the demands of the actual object mix and evaluate the selected cycle time; the total is not a promise of one fixed axis count. -
Why can a large cam table restrict a project even when ordinary axis resources remain?
Extended Motion Control has a separate pool of 40 resources. The manual assigns two to a cam with 1,000 points and 50 segments, but 20 to a cam with 10,000 points and 50 segments. Include other extended objects when checking this independent budget. -
Can one kinematics object be treated as a collection of cost-free axis transformations?
No. The documented extended-resource demand is 30 for each set of kinematics. The supporting axes also require their applicable Motion Control resources. Validate both budgets and the supported kinematic configuration in the engineering project. -
What is the resource allowance for bringing in a leading-axis reference from another PLC?
The manual assigns three Extended Motion Control resources per leading axis proxy. Reserve these in addition to the associated motion objects, and engineer the cross-PLC synchronization and communication according to the applicable Siemens motion documentation. -
May a position-controlled axis use more than one actual-position measuring system?
The technology-CPU function description supports up to four encoders or measuring systems as actual positions for position control. This requires the supported axis configuration and compatible feedback devices; it does not mean that four sensor inputs are physically built into the CPU. -
Will a copied project always run on a replacement CPU with a different serial number?
Not necessarily. Siemens copy protection can bind user blocks to the CPU or SIMATIC Memory Card serial number. Check protected-block dependencies and obtain the authorized project or vendor support before exchanging the controller or its card. -
Does a 250 microsecond IRT send cycle guarantee the same isochronous program cycle?
No. The manual explicitly identifies a minimum distributed isochronous OB cycle of 625 microseconds and a central value of 1 ms. Plan acquisition and application timing against those limits instead of equating the Ethernet send cycle with program execution. -
Can all 128 connectable PROFINET devices be configured as IRT devices?
The documented IO-controller limit is 128 connected devices, of which at most 64 can use IRT. Check the device mix, communication share and user-data volume during sizing; the total device capacity and IRT capacity are separate restrictions.
READY TO VERIFY YOUR PART?
Get a 6ES7511-1TK01-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
