PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-1500
- 6ES7532-5HD00-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7532-5HD00-0AB0 Four Channel Analog Output Module
Siemens 6ES7532-5HD00-0AB0 is a four channel analog output module in the SIMATIC S7-1500 AQ 4xU/I ST range. It is intended for compatible industrial automation projects requiring the documented voltage or current actuator outputs.
The module generates four voltage or current outputs with 16-bit resolution. It provides diagnostics and selectable substitute values, with an all-channel minimum cycle time of 3.2 ms. Voltage-output short-circuit detection and current-output wire-break detection apply to their respective operating modes.
The module generates four voltage or current outputs with 16-bit resolution. It provides diagnostics and selectable substitute values, with an all-channel minimum cycle time of 3.2 ms. Voltage-output short-circuit detection and current-output wire-break detection apply to their respective operating modes.
BEFORE YOU BUY
Confirm the complete four channel analog output module
ACTUAL APPLICATIONS
Application context for 6ES7532-5HD00-0AB0
6ES7532-5HD00-0AB0 is a four channel analog output module for SIMATIC S7-1500 AQ 4xU/I ST. Its industrial use includes industrial manufacturing, water and wastewater, food and beverage. Selection depends on the connected equipment and documented configuration.
-
01 · INDUSTRIAL MANUFACTURING
Industrial Assembly and Component Production
Industrial Component Manufacturing ProcessesAutomated Assembly and Production -
02 · WATER & WASTEWATER
Water Supply and Municipal Wastewater Treatment
Industrial Water Treatment ProcessesMunicipal Wastewater Process Control -
03 · FOOD & BEVERAGE
Food Processing and Beverage Production
Dairy Processing and ProductionFood Production and Packaging
Technical specifications for 6ES7532-5HD00-0AB0
-
Product Model6ES7532-5HD00-0AB0
-
Product ParametersFour Channel Analog Output Module
-
In stock1 unit
-
ManufacturerSiemens
-
Load supply range19.2–28.8 V DC
-
Maximum supply current190 mA at 24 V DC
-
Backplane power0.6 W
-
Typical power loss4 W
-
Analog output count4
-
Output resolution16 bit including sign
-
Voltage output ranges0–10 V, 1–5 V, ±10 V
-
Current output ranges0–20 mA, 4–20 mA, ±20 mA
-
All-channel cycle time3.2 ms minimum
-
Per-channel conversion time0.5 ms
-
Maximum current-output load750 Ω
-
Voltage-output load minimum1 kΩ; 0.5 kΩ at 1–5 V
-
Operational error limit±0.3% voltage/current
-
Voltage-output short-circuit current24 mA maximum
-
Isolation test707 V DC type test
View all additional
Alternative Names
6ES7532-5HD00-0AB0
SIMATIC S7-1500 AQ 4xU/I ST Four Channel Analog Output Module
SIMATIC S7-1500 AQ 4xU/I ST 19.2–28.8 V DC Four Channel Analog Output Module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7532-5HD00-0AB0 four channel analog output module
Integrate 6ES7532-5HD00-0AB0 only in the documented SIMATIC S7-1500 AQ 4xU/I ST configuration. Match the installed interfaces and the engineered application before selecting this four channel analog output module.
The module generates four voltage or current outputs with 16-bit resolution. It provides diagnostics and selectable substitute values, with an all-channel minimum cycle time of 3.2 ms. Voltage-output short-circuit detection and current-output wire-break detection apply to their respective operating modes.
Use the applicable controlled instructions for SIMATIC S7-1500 AQ 4xU/I ST. Validate the assigned signals, communication or output behaviour and retain the accepted configuration for 6ES7532-5HD00-0AB0.
Features:
- Load supply range: 19.2–28.8 V DC
- Maximum supply current: 190 mA at 24 V DC
- Backplane power: 0.6 W
The 6ES7532-5HD00-0AB0 four channel analog output module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7532-5HD00-0AB0 four channel analog output module
Confirm the complete 6ES7532-5HD00-0AB0 identity and installed SIMATIC S7-1500 AQ 4xU/I ST execution before replacement. Compare the connector arrangement and the technical values required by the existing project.
Record the four channel analog output module connections, project settings and associated accessories. Preserve the accepted configuration and isolate the affected circuits before exchange.
After fitting 6ES7532-5HD00-0AB0, restore the verified configuration and test every affected function. Retain the identification, diagnostic results and final acceptance record for the SIMATIC S7-1500 AQ 4xU/I ST equipment.
Features:
- Load supply range: 19.2–28.8 V DC
- Maximum supply current: 190 mA at 24 V DC
- Backplane power: 0.6 W
The 6ES7532-5HD00-0AB0 four channel analog output module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7532-5HD00-0AB0 four channel analog output module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.5 × 12.5 × 14.6cm
-
Shipping weight0.40kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7532-5HD00-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which load-supply range supports AQ 4xU/I ST?
For 6ES7532-5HD00-0AB0, the documented load supply range is 19.2–28.8 V DC. -
What maximum supply current is needed for this AQ module?
For 6ES7532-5HD00-0AB0, the documented maximum supply current is 190 mA at 24 V DC. -
How much power is drawn from its S7-1500 backplane?
For 6ES7532-5HD00-0AB0, the documented backplane power is 0.6 W. -
What typical loss must be allowed for the AQ module?
For 6ES7532-5HD00-0AB0, the documented typical power loss is 4 W. -
How many independently configured analog outputs are available?
For 6ES7532-5HD00-0AB0, the documented analog output count is 4. -
What resolution does the four-channel ST output use?
For 6ES7532-5HD00-0AB0, the documented output resolution is 16 bit including sign. -
What identification supports ordering the SIMATIC S7-1500 AQ 4xU/I ST spare?
Specify 6ES7532-5HD00-0AB0, quantity and the installed SIMATIC S7-1500 AQ 4xU/I ST arrangement. Include label and connector photographs, and identify any required accessories separately. -
Which incoming checks apply to the four channel analog output module?
Compare the 6ES7532-5HD00-0AB0 label, connector condition and supplied accessories with the quotation. Verify the accepted SIMATIC S7-1500 AQ 4xU/I ST configuration before replacing the installed item.
READY TO VERIFY YOUR PART?
Get a 6ES7532-5HD00-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
