PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- Simatic DP
- 6ES7193-0CB10-0XA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7193-0CB10-0XA0 ET 200B TB2 DC terminal block
The Siemens 6ES7193-0CB10-0XA0 is the TB2 DC terminal block used with digital electronic submodules in the SIMATIC ET 200B distributed I/O family. It provides the three wire screw terminal field interface and the station side electrical arrangement required by the matching ET 200B electronics.
A 24 V DC internal supply supports the terminal block while galvanic separation is maintained between the electronic block and PROFIBUS DP. The wide terminal assembly organizes field conductors in a fixed decentralized station format for legacy ET 200B installations.
A 24 V DC internal supply supports the terminal block while galvanic separation is maintained between the electronic block and PROFIBUS DP. The wide terminal assembly organizes field conductors in a fixed decentralized station format for legacy ET 200B installations.
BEFORE YOU BUY
Confirm the complete ET 200B TB2 DC terminal block
ACTUAL APPLICATIONS
Application fields for 6ES7193-0CB10-0XA0
6ES7193-0CB10-0XA0 is used across compatible installations in the following broad industrial application fields, subject to verified system design and operating requirements.
-
01 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Continuous Production
Discrete manufacturing and assembly productionContinuous industrial production operations -
02 · WATER & WASTEWATER
Municipal Water and Industrial Wastewater Services
Municipal water treatment servicesIndustrial wastewater treatment operations -
03 · PULP & PAPER
Pulp Production and Paper Product Manufacturing
Pulp and fibre productionPaper and packaging material manufacturing
Technical specifications for 6ES7193-0CB10-0XA0
-
Product Model6ES7193-0CB10-0XA0
-
Product ParametersET 200B TB2 DC terminal block
-
In stock1 unit
-
ManufacturerSiemens
-
System familySIMATIC ET 200B
-
Terminal block designationTB2/DC
-
Supported submodulesDigital electronic submodules
-
Wiring arrangement3 wire
-
Terminal technologyScrew terminals
-
Rated supply24 V DC
-
Permitted supply minimum18.5 V DC
-
Permitted supply maximum30 V DC
-
Typical current consumption100 mA
-
Maximum current consumption200 mA
-
PROFIBUS isolationElectronics isolated from PROFIBUS DP
-
Protection classIP20
-
Operating temperature minimum0 °C
-
Operating temperature maximum60 °C
-
Product statusSpare part
View all additional
Alternative Names
Siemens ET 200B TB2 DC terminal block
SIMATIC ET 200B
ET 200B TB2 DC terminal block for SIMATIC ET 200B
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7193-0CB10-0XA0 ET 200B TB2 DC terminal block
6ES7193-0CB10-0XA0 is integrated in the SIMATIC ET 200B architecture as the TB2 DC field terminal assembly for digital submodules in a legacy ET 200B node. The manufacturer documentation treats this function as part of the complete station or drive arrangement, so its behavior depends on the associated host hardware, approved module sequence and project configuration rather than the article operating as an independent device.
The integration design must coordinate the screw terminal conductor map, three wire sensor or actuator arrangement, internal logic supply and the isolated PROFIBUS DP electronics section. Connector coding, conductor identification, shielding, grounding and mechanical seating should follow the applicable manufacturer drawings so that the installed assembly retains the electrical separation, signal integrity and service access intended for the platform.
Commissioning should energize the node, verify the terminal block supply and DP station status, and prove the installed digital channels against the controller process image. The observed device status, controller diagnostics and functional response should be compared with the saved project and manufacturer sequence before the installation is released for normal service, with any unexpected indication resolved at the relevant station, channel or network level.
Features:
- Exact identity: 6ES7193-0CB10-0XA0
- Family: SIMATIC ET 200B
- Documented integration and testing
6ES7193-0CB10-0XA0 requires documented system integration before energising the installation.
INTERCHANGEABILITY
Verify 6ES7193-0CB10-0XA0 before replacement
Replacement selection for 6ES7193-0CB10-0XA0 must be based on the complete article identity and its documented role as the TB2 DC field terminal assembly for digital submodules in a legacy ET 200B node. A component from the same SIMATIC ET 200B family can have a similar enclosure while using a different electrical interface, terminal arrangement, firmware level or supported host, so family resemblance alone does not establish interchangeability.
Before removal, record the installed position and all details associated with the screw terminal conductor map, three wire sensor or actuator arrangement, internal logic supply and the isolated PROFIBUS DP electronics section. Preserve the controller or drive project, diagnostic state, cable labels, connector orientation and any licensed or stored configuration that belongs to the original assembly, because these records provide the reference for rebuilding the documented system relationship.
After the replacement is fitted, energize the node, verify the terminal block supply and DP station status, and prove the installed digital channels against the controller process image. Final acceptance should include a comparison of indications, diagnostics and controlled functional behavior with the earlier records and the manufacturer documentation, confirming that no adjacent module, field circuit, communication path or configured function was unintentionally changed.
Features:
- Match 6ES7193-0CB10-0XA0 exactly
- Record connections and settings before removal
- Complete controlled post-installation tests
6ES7193-0CB10-0XA0 requires replacement verification against the installed hardware and configuration.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Match documents to the complete product identity
- Use the applicable manufacturer family instructions
- Additional documents are supplied only when quoted
Documentation for 6ES7193-0CB10-0XA0 must be checked against the installed configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size23.5 × 13.0 × 5.9 cm
-
Net weight0.80 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7193-0CB10-0XA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is 6ES7193-0CB10-0XA0?
6ES7193-0CB10-0XA0 is a ET 200B TB2 DC terminal block for the SIMATIC ET 200B. -
Which identity must be used when ordering 6ES7193-0CB10-0XA0?
Use the complete 6ES7193-0CB10-0XA0 marking and compare it with the installed label and project records. -
Can a similar family item replace 6ES7193-0CB10-0XA0?
Do not confirm substitution from a family name or similar appearance. Verify the complete code, interfaces, revision and approved configuration. -
What should be recorded before removing 6ES7193-0CB10-0XA0?
Record the installed position, connections, cable labels, settings and diagnostic state. -
What should be inspected when 6ES7193-0CB10-0XA0 arrives?
Inspect the label, housing, connectors, terminals and packaging for correct identity and condition. -
Which checks follow installation?
Restore the approved configuration and complete controlled power-up, diagnostic and functional tests. -
What information should accompany a quotation?
Provide the complete model, quantity, clear label photographs, destination and required delivery date. -
Which documentation applies?
Use the manufacturer documentation for SIMATIC ET 200B and confirm that its scope covers the installed configuration.
READY TO VERIFY YOUR PART?
Get a 6ES7193-0CB10-0XA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
