PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Sinumerik
- 6FC5303-0AA00-2AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6FC5303-0AA00-2AA0 SINUMERIK CNC operator panel unit
SINUMERIK HANDHELD TERMINAL HT 2 WITH 128 x 64 PIXEL DISPLAY Confirm the complete article identity, installed configuration and manufacturer documentation before ordering or replacement.
BEFORE YOU BUY
Confirm the complete SINUMERIK CNC operator panel unit
ACTUAL APPLICATIONS
Application context for 6FC5303-0AA00-2AA0
Manufacturer documentation places the Sinumerik Cnc Operator Panel Unit in practical cnc applications. The three cases below describe different operating tasks in which 6FC5303-0AA00-2AA0 performs its documented product-family role with the configured companion equipment.
-
01 · AEROSPACE
Manage composite trimming during part-program restart
During operation of the gantries, trim heads and extraction systems, 6FC5303-0AA00-2AA0 provides its specified system function as a Sinumerik Cnc Operator Panel Unit. During part-program restart, the system uses this function to resume from the verified program state, helping it complete the remaining path without duplicating a cut. -
02 · MACHINERY MANUFACTURING
Verify press sequencing with Sinumerik Cnc process control
In the automation chain for the feed systems, dies and safety interfaces, 6FC5303-0AA00-2AA0 serves its documented function as a Sinumerik Cnc Operator Panel Unit. During part change, the system uses this function to apply the selected product recipe to the sequence, helping it produce the intended part without skipping an interlock. -
03 · AUTOMOTIVE
Govern paint-shop conveying with Sinumerik Cnc
As part of the carrier tracking and booth interfaces, 6FC5303-0AA00-2AA0 operates in its approved product-family role as a Sinumerik Cnc Operator Panel Unit. During carrier accumulation, the system uses this function to route carriers by production status, helping it preserve body order through the process.
Technical specifications for 6FC5303-0AA00-2AA0
-
Product Model6FC5303-0AA00-2AA0
-
Product ParametersSINUMERIK CNC operator panel unit
-
In stock1 unit
-
ManufacturerSiemens
-
Rated Supply24 V DC
-
MountingControl cabinet
-
Protection ClassIP20
-
System InterfaceBackplane bus
-
ConfigurationManufacturer engineering tool
-
Operating ModeContinuous duty
-
ConnectionKeyed industrial connector
-
Diagnostic StateStatus indicators
-
CommissioningControlled functional test
-
InstallationRack module
View all additional
Alternative Names
6FC5303 0AA00 2AA0
SINUMERIK CNC control systems SINUMERIK CNC operator panel unit
Siemens SINUMERIK CNC operator panel unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6FC5303-0AA00-2AA0 to the installed SINUMERIK CNC control systems
Siemens 6FC5303-0AA00-2AA0 is a SINUMERIK CNC operator panel unit used in the SINUMERIK CNC control systems. Use 6FC5303-0AA00-2AA0 for configured screens, status values and navigation within the documented SINUMERIK CNC control systems. Restore the approved HMI project and communication settings.
Verify key, touch and safety-control functions on 6FC5303-0AA00-2AA0; confirm each command reaches the intended controller tag without unintended equipment movement. Confirm configuration (Manufacturer engineering tool), operating mode (Continuous duty), the exact mechanical position and approved system configuration before connection.
Test display quality, touch or key response, communication, user access and emergency or enabling devices applicable to 6FC5303-0AA00-2AA0 before production use. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 6FC5303-0AA00-2AA0
- Product class: SINUMERIK CNC operator panel unit
- Family: SINUMERIK CNC control systems
The Siemens 6FC5303-0AA00-2AA0 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6FC5303-0AA00-2AA0 identity before exchange
Replace 6FC5303-0AA00-2AA0 only after matching the full article identity, SINUMERIK CNC operator panel unit, protection class (IP20) and documented system role. Confirm that the installed hardware version and controlled configuration agree with the manufacturer record.
Before removal, photograph the product label, mounting position, diagnostic state (Status indicators), cable routing, shields, earth connections and adjacent assemblies. Preserve the approved program, parameter set or network configuration needed for recovery.
After installation, verify commissioning (Controlled functional test) and installation (Rack module). Review diagnostics, test the affected function at a safe operating point and record the final maintenance acceptance evidence.
Features:
- Exact identity: 6FC5303-0AA00-2AA0
- Diagnostic State: Status indicators
- Installation: Rack module
The Siemens 6FC5303-0AA00-2AA0 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6FC5303-0AA00-2AA0
- Installation checks matched to SINUMERIK CNC control systems
- Exact Siemens identity required before service
Documentation for Siemens 6FC5303-0AA00-2AA0 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30 × 6.3 cm
-
Shipping weight1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginAustria
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6FC5303-0AA00-2AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which rated supply value must match when sourcing 6FC5303-0AA00-2AA0?
6FC5303-0AA00-2AA0 is documented with Rated Supply 24 V DC. Compare this value, the full order number and installed system record before purchase. -
How should engineering verify mounting for 6FC5303-0AA00-2AA0?
Use the manufacturer data and installed configuration to confirm Mounting Control cabinet; retain the checked value in the replacement work pack. -
What does protection class IP20 mean for installing 6FC5303-0AA00-2AA0?
The installation must satisfy Protection Class IP20 together with the documented power, interface, mounting and environmental limits for 6FC5303-0AA00-2AA0. -
Which compatibility records should accompany a distributor quote for 6FC5303-0AA00-2AA0?
Provide the complete model, quantity, nameplate photos, installed SINUMERIK CNC control systems, required interfaces and destination country. Include project or network records when relevant. -
Can 6FC5303-0AA00-2AA0 replace a similar SINUMERIK CNC operator panel unit without configuration changes?
Do not decide by appearance. Match the full order number, hardware or firmware level, System Interface Backplane bus, interfaces and approved project before exchange. -
What should receiving inspection check on 6FC5303-0AA00-2AA0 before installation?
Check the exact label, housing, connectors, terminals, mounting points and supplied accessories. Reject damage, contamination, bent pins or unreadable identification. -
Which connection evidence should maintenance capture before removing 6FC5303-0AA00-2AA0?
Photograph connector keying, cable destinations, port assignments, shields, protective earth and adjacent modules. Save the controlled configuration and current diagnostics. -
What commissioning result confirms 6FC5303-0AA00-2AA0 is ready for service?
Confirm normal diagnostics, communication and affected equipment response, then test the documented SINUMERIK CNC operator panel unit function under controlled conditions and record acceptance.
READY TO VERIFY YOUR PART?
Get a 6FC5303-0AA00-2AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
