PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Sinumerik
- 6FC5370-0AA00-1AA1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6FC5370-0AA00-1AA1 SINUMERIK 802D sl T/M Value control unit
Siemens 6FC5370-0AA00-1AA1 is a SINUMERIK 802D sl T/M Value control unit in the SINUMERIK CNC systems. It is used to control the connected motor or drive function within the configured machine.
Its documented configuration includes control family of SINUMERIK 802D sl, software version of T/M Value, market version of Export, and machine type of Turning and milling. During operation, the SINUMERIK 802D sl T/M Value control unit processes the configured drive commands and regulates the connected motor or power section.
Its documented configuration includes control family of SINUMERIK 802D sl, software version of T/M Value, market version of Export, and machine type of Turning and milling. During operation, the SINUMERIK 802D sl T/M Value control unit processes the configured drive commands and regulates the connected motor or power section.
BEFORE YOU BUY
Confirm the complete SINUMERIK 802D sl T/M Value control unit
ACTUAL APPLICATIONS
Where 6FC5370-0AA00-1AA1 operates in industrial systems
Siemens official documentation supports these system applications when the module is correctly configured and integrated.
-
01 · MACHINERY MANUFACTURING
Production Machine Positioning and Control Systems
Machining automation systemsMilling centers and tool changersProbe stations and part inspection cycles -
02 · AUTOMOTIVE
Powertrain Machining and Assembly Systems Operations
Production machine systemsAxle component grinders and gauging stationsTool monitoring stations and quality servers -
03 · ELECTRONICS MANUFACTURING
Precision Component Machining and Test Systems
Assembly motion systemsEnclosure milling cells and pallet changersLaser marking stations and indexing tables
Technical specifications for 6FC5370-0AA00-1AA1
-
Product Model6FC5370-0AA00-1AA1
-
Product ParametersSINUMERIK 802D sl T/M Value control unit
-
In stock1 unit
-
ManufacturerSiemens
-
Product FamilySINUMERIK CNC systems
-
Control FamilySINUMERIK 802D sl
-
Software VersionT/M Value
-
Market VersionExport
-
Machine TypeTurning and milling
-
NC Channels1
-
Axis Configuration3 axes and 1 spindle
-
CNC User Memory512 KB
-
Integrated FunctionsNC, PLC and HMI
-
Drive InterfaceSINAMICS
-
Panel Supply24 V DC
-
Engineering SoftwareSINUMERIK Toolbox
-
Operator Software802D sl HMI
View all additional
Alternative Names
6FC5370 0AA00 1AA1
Siemens SINUMERIK 802D sl T/M Value control unit
SINUMERIK CNC systems SINUMERIK 802D sl T/M Value control unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6FC5370-0AA00-1AA1 to the installed SINUMERIK CNC systems
Siemens 6FC5370-0AA00-1AA1 is a SINUMERIK 802D sl T/M Value control unit for the SINUMERIK CNC systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare control family (SINUMERIK 802D sl), software version (T/M Value) and market version (Export) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6FC5370-0AA00-1AA1
- Product class: SINUMERIK 802D sl T/M Value control unit
- Family: SINUMERIK CNC systems
The Siemens 6FC5370-0AA00-1AA1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6FC5370-0AA00-1AA1 identity before exchange
Replace 6FC5370-0AA00-1AA1 only after matching the complete article code, SINUMERIK 802D sl T/M Value control unit, installed SINUMERIK CNC systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6FC5370-0AA00-1AA1
- Product class: SINUMERIK 802D sl T/M Value control unit
- Family check: SINUMERIK CNC systems
The Siemens 6FC5370-0AA00-1AA1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical data prepared for 6FC5370-0AA00-1AA1
- Product family: SINUMERIK CNC systems
- Exact Siemens identity required before service
Documentation for Siemens 6FC5370-0AA00-1AA1 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30.9 × 32.9 × 11.9 cm
-
Shipping weight5.15 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6FC5370-0AA00-1AA1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which incoming-inspection checks apply to 6FC5370-0AA00-1AA1?
Inspect the 6FC5370-0AA00-1AA1 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same SINUMERIK CNC systems family directly replace 6FC5370-0AA00-1AA1?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing 6FC5370-0AA00-1AA1?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting 6FC5370-0AA00-1AA1. -
Which configuration data should be backed up before exchanging 6FC5370-0AA00-1AA1?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission 6FC5370-0AA00-1AA1 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected SINUMERIK 802D sl T/M Value control unit function at a safe operating point. -
What service evidence should be retained after work on 6FC5370-0AA00-1AA1?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for 6FC5370-0AA00-1AA1. -
Which nameplate details identify the correct 6FC5370-0AA00-1AA1 for a distributor quotation?
Quote 6FC5370-0AA00-1AA1 with the complete suffix, SINUMERIK 802D sl T/M Value control unit, SINUMERIK CNC systems, quantity and clear nameplate photographs. -
What should engineering compare before integrating 6FC5370-0AA00-1AA1 into the installed system?
Compare the documented SINUMERIK CNC systems role, supply class, communication or signal interface, firmware or hardware revision and companion equipment.
READY TO VERIFY YOUR PART?
Get a 6FC5370-0AA00-1AA1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
