PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Sipart
- 6DR5010-0EN01-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6DR5010-0EN01-0AA0 Electropneumatic valve positioner
Siemens 6DR5010-0EN01-0AA0 is a SIPART PS2 electropneumatic positioner for compatible pneumatic control-valve actuators. It converts the 4 to 20 mA setpoint into regulated actuator position for industrial process flow control.
The two-wire positioner combines electronic position feedback with a pneumatic control block in a glass-fiber-reinforced polycarbonate enclosure. Its regulated air output adjusts the actuator to the commanded position. The supported mechanical travel includes linear strokes from 3 to 130 mm and part-turn movement from 30 to 100 degrees, using the appropriate mounting components.
The two-wire positioner combines electronic position feedback with a pneumatic control block in a glass-fiber-reinforced polycarbonate enclosure. Its regulated air output adjusts the actuator to the commanded position. The supported mechanical travel includes linear strokes from 3 to 130 mm and part-turn movement from 30 to 100 degrees, using the appropriate mounting components.
BEFORE YOU BUY
Confirm the complete electropneumatic valve positioner
ACTUAL APPLICATIONS
Application context for 6DR5010-0EN01-0AA0
6DR5010-0EN01-0AA0 is a SIPART PS2 two-wire electropneumatic positioner for pneumatic process-valve control. Compatible valve assemblies serve chemical production, water treatment and thermal power processing. Suitability depends on actuator action, mechanical travel, air quality, signal wiring and the required protection conditions.
-
01 · CHEMICAL PROCESSING
Chemical Process Production and Material Conversion
Chemical Flow Process RegulationIndustrial Chemical Batch Processing -
02 · WATER & WASTEWATER
Water Supply Treatment and Wastewater Processing
Drinking Water Process TreatmentIndustrial Wastewater Flow Regulation -
03 · POWER GENERATION
Thermal Power Generation and Heat Production
Steam Generation Process RegulationIndustrial Heat Supply Production
Technical specifications for 6DR5010-0EN01-0AA0
-
Product Model6DR5010-0EN01-0AA0
-
Product ParametersElectropneumatic valve positioner
-
In stock3 units
-
ManufacturerSiemens
-
Setpoint signal4 to 20 mA
-
Electrical connection2-wire
-
Minimum sustaining current3.6 mA
-
Input test voltage840 V DC for 1 s
-
Linear actuator stroke3 to 130 mm
-
Part-turn actuator angle30 to 100°
-
Air supply pressure1.4 to 7 bar
-
Air qualityISO 8573-1 Class 3
-
Pressurizing flow4.1, 7.1 and 9.8 Nm³/h at 2, 4 and 6 bar
-
Exhaust flow8.2, 13.7 and 19.2 Nm³/h at 2, 4 and 6 bar
-
Pneumatic leakageLess than 0.0006 Nm³/h
-
Controlled-state air consumptionLess than 0.036 Nm³/h
-
Sound pressureLAeq below 75 dB; LAmax below 80 dB
-
Actuator fixing torque5 Nm part-turn; 12 Nm linear
-
Enclosure protectionIP66
View all additional
Alternative Names
6DR5010-0EN01-0AA0
SIPART PS2 Electropneumatic valve positioner
PS2 4 to 20 mA setpoint signal
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6DR5010-0EN01-0AA0 electropneumatic valve positioner
Siemens 6DR5010-0EN01-0AA0 is a SIPART PS2 electropneumatic positioner for compatible pneumatic control-valve actuators. It converts the 4 to 20 mA setpoint into regulated actuator position for industrial process flow control.
Compare setpoint signal (4 to 20 mA), electrical connection (2-wire) and minimum sustaining current (3.6 mA) with the installed SIPART PS2 configuration. Match the supply connections and documented companion hardware before connection.
Use the applicable SIPART PS2 instructions for wiring and commissioning. Test the affected functions of 6DR5010-0EN01-0AA0, review its status indications and record the accepted settings with the equipment documentation.
Features:
- Setpoint signal: 4 to 20 mA
- Electrical connection: 2-wire
- Minimum sustaining current: 3.6 mA
The 6DR5010-0EN01-0AA0 electropneumatic valve positioner requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6DR5010-0EN01-0AA0 electropneumatic valve positioner
Replace 6DR5010-0EN01-0AA0 only after matching its complete article, SIPART PS2 role and installed interface configuration. Related order numbers do not establish interchangeability.
Record the existing electropneumatic valve positioner connections and preserve the configured SIPART PS2 settings before removal. Photograph connector keying, cable labels and the supplied article identification.
After fitting the verified 6DR5010-0EN01-0AA0, restore the documented settings and test the affected functions at a safe operating point. Retain its receiving inspection and functional acceptance results with the asset record.
Features:
- Setpoint signal: 4 to 20 mA
- Electrical connection: 2-wire
- Minimum sustaining current: 3.6 mA
The 6DR5010-0EN01-0AA0 electropneumatic valve positioner requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6DR5010-0EN01-0AA0 electropneumatic valve positioner must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size21.1 × 10.2 × 11 cm
-
Shipping weight1.04kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9032810000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6DR5010-0EN01-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the 6DR50 positioner provide HART communication?
The 6DR50 range uses the 4 to 20 mA two-wire signal; HART functions must not be assumed from another SIPART PS2 variant. -
What air supply pressure is required by this PS2?
The applicable pneumatic data specify an air supply from 1.4 to 7 bar. -
Can SIPART PS2 be fitted to a linear actuator?
The documented linear stroke range is 3 to 130 mm with the appropriate actuator mounting kit. -
What part-turn travel is supported by the positioner?
The documented positioner range for a part-turn actuator is 30 to 100 degrees. -
Which air quality class applies to pneumatic operation?
The PS2 instructions specify ISO 8573-1 Class 3 for particulate matter, dew point and oil content. -
Is the positioner rated as a complete control valve?
No. It regulates a compatible pneumatic actuator; valve capacity and process pressure belong to the selected valve assembly. -
What valve information is useful for a PS2 quotation?
Provide 6DR5010-0EN01-0AA0, actuator action, travel, mounting arrangement, signal interface and hazardous-area requirements. -
What should be matched when the PS2 arrives?
Check the complete suffix, enclosure, pneumatic connections, electrical terminals and included mounting or feedback accessories.
READY TO VERIFY YOUR PART?
Get a 6DR5010-0EN01-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
