PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6DP1230-8CC TELEPERM XP analog transmitter module
Siemens 6DP1230-8CC is a TELEPERM XP analog transmitter module in the TELEPERM XP process control systems. The article-specific data identifies its control role, communication or signal interface and installed system compatibility. Confirm the complete nameplate, electrical class, revision, companion equipment and controlled configuration before ordering.
BEFORE YOU BUY
Confirm the complete TELEPERM XP analog transmitter module
ACTUAL APPLICATIONS
Application context for 6DP1230-8CC
Manufacturer documentation places the TELEPERM XP analog transmitter module in practical automation applications. The three cases below describe different operating tasks in which 6DP1230-8CC performs its documented product-family role with the configured companion equipment.
-
01 · POWER GENERATION
Maintain generator excitation with Teleperm Xp
For the coordinated operation of the field circuits and voltage regulation, 6DP1230-8CC performs its assigned control role as a TELEPERM XP analog transmitter module. During load change, the system uses this function to adjust the assigned regulation path from operating feedback, helping it hold the electrical variable at its commanded target. -
02 · WATER & WASTEWATER
Sequence raw-water pumping with Teleperm Xp process control
During operation of the intake pumps and wet wells, 6DP1230-8CC supports the configured automation role as a TELEPERM XP analog transmitter module. During peak-flow demand, the system uses this function to coordinate pump duty and level response, helping it maintain hydraulic continuity. -
03 · FOOD & BEVERAGE
Manage clean-in-place transfer with Teleperm Xp
Within the CIP supply and return headers, 6DP1230-8CC performs its assigned control role as a TELEPERM XP analog transmitter module. During sanitation transition, the system uses this function to coordinate valve paths and pump availability, helping it complete sanitation without cross-routing product.
Technical specifications for 6DP1230-8CC
-
Product Model6DP1230-8CC
-
Product ParametersTELEPERM XP analog transmitter module
-
In stock1 unit
-
ManufacturerSiemens
-
Product FamilyTELEPERM XP process control systems
-
Control SystemTELEPERM XP
-
Signal TypeAnalog transmitter input
-
Process ValueStandardized analog signal
-
Channel IsolationGalvanic signal isolation
-
BackplaneTELEPERM XP rack bus
-
DiagnosticsModule and channel status
-
Supply SourceRack backplane
-
Signal ConditioningFiltering and linearization
-
MountingTELEPERM XP module slot
-
ApplicationProcess measurement acquisition
-
ConfigurationSystem engineering database
View all additional
Alternative Names
6DP1230 8CC
Siemens TELEPERM XP analog transmitter module
TELEPERM XP process control systems TELEPERM XP analog transmitter module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6DP1230-8CC to the installed TELEPERM XP process control systems
Siemens 6DP1230-8CC is a TELEPERM XP analog transmitter module for the TELEPERM XP process control systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare control system (TELEPERM XP), signal type (Analog transmitter input) and process value (Standardized analog signal) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6DP1230-8CC
- Product class: TELEPERM XP analog transmitter module
- Family: TELEPERM XP process control systems
The Siemens 6DP1230-8CC requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6DP1230-8CC identity before exchange
Replace 6DP1230-8CC only after matching the complete article code, TELEPERM XP analog transmitter module, installed TELEPERM XP process control systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6DP1230-8CC
- Product class: TELEPERM XP analog transmitter module
- Family check: TELEPERM XP process control systems
The Siemens 6DP1230-8CC requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical data prepared for 6DP1230-8CC
- Product family: TELEPERM XP process control systems
- Exact Siemens identity required before service
Documentation for Siemens 6DP1230-8CC must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.5 × 23.3 × 16 cm
-
Shipping weight0.60 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6DP1230-8CC
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which connection records should maintenance capture before removing 6DP1230-8CC?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting 6DP1230-8CC. -
Which configuration data should be backed up before exchanging 6DP1230-8CC?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission 6DP1230-8CC after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected TELEPERM XP analog transmitter module function at a safe operating point. -
What service evidence should be retained after work on 6DP1230-8CC?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for 6DP1230-8CC. -
Which nameplate details identify the correct 6DP1230-8CC for a distributor quotation?
Quote 6DP1230-8CC with the complete suffix, TELEPERM XP analog transmitter module, TELEPERM XP process control systems, quantity and clear nameplate photographs. -
What should engineering compare before integrating 6DP1230-8CC into the installed system?
Compare the documented TELEPERM XP process control systems role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to 6DP1230-8CC?
Inspect the 6DP1230-8CC label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same TELEPERM XP process control systems family directly replace 6DP1230-8CC?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement.
READY TO VERIFY YOUR PART?
Get a 6DP1230-8CC quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
