PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Weintek
- MT8102iE
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
MT8102iE Ten-inch touchscreen operator panel
Weintek MT8102iE is a 10.1-inch TFT touchscreen HMI in the MT8000iE range. Its 1024 x 600 display, single-core RISC processor and 128 MB each of flash and RAM support a dedicated operator-interface project with serial and Ethernet connections to the controller.
The panel uses a 24 V DC supply with a listed 650 mA consumption and one 10/100Base-T Ethernet interface. Serial connections include RS-232 and RS-485 arrangements with shared-port restrictions. The original MT8102iE is a CE-listed model; its specification must be distinguished from the recommended cMT2108X2 successor and from other iE suffix variants.
The panel uses a 24 V DC supply with a listed 650 mA consumption and one 10/100Base-T Ethernet interface. Serial connections include RS-232 and RS-485 arrangements with shared-port restrictions. The original MT8102iE is a CE-listed model; its specification must be distinguished from the recommended cMT2108X2 successor and from other iE suffix variants.
BEFORE YOU BUY
Confirm the complete MT8102iE identity
ACTUAL APPLICATIONS
Application fields for MT8102iE
These broad application fields reflect the documented function and technical characteristics of MT8102iE.
-
01 · WATER & WASTEWATER
Wastewater Treatment and Water Reuse
Municipal sewage treatment and community sewage treatmentMunicipal water reuse and reclaimed water supply -
02 · POWER GENERATION
Hydroelectric and Combined Cycle Generation
River hydroelectric generation and distributed hydroelectric generationUtility combined cycles and combined cycle cogeneration -
03 · OIL & GAS
Petroleum Exploration and Natural Gas Supply
Offshore oil exploration and deepwater oil explorationPipeline gas supply and industrial gas supply
Technical specifications for MT8102iE
-
Product ModelMT8102iE
-
Product ParametersTen-inch touchscreen operator panel
-
In stock6 units
-
ManufacturerWeintek
-
Display diagonal10.1 in
-
Display technologyTFT LCD
-
Pixel resolution1024 x 600
-
Flash memory128 MB
-
RAM128 MB
-
Processor architectureSingle-core RISC
-
Ethernet interface1 x 10/100Base-T
-
Nominal power supply24 V DC
-
Rated current650 mA at 24 V
-
Operating temperature0 to +50 °C
-
Humidity10 to 90% noncondensing
-
Maximum panel thickness4.5 mm
-
Mounting screw torque2.6 to 3.9 lbf.in
-
Power connector torque3.47 lbf.in maximum
-
Front environment ratingNEMA 4 indoor
View all additional
Alternative Names
MT8102iE
MT8000iE
Ten-inch touchscreen operator panel
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate MT8102iE within MT8000iE
Build the HMI project for the MT8102iE hardware target and its installed controller drivers. The original unit has one 10/100 Ethernet port and 128 MB memory capacities; the larger memory and additional Ethernet resources in the cMT successor do not belong to this model.
Mount the panel vertically in a sufficiently rigid enclosure using the specified 260 by 202 mm cutout and all supplied brackets. Keep the panel thickness at or below 4.5 mm and provide the installation-guide ventilation clearances.
Connect a suitable 24 V DC supply with the documented polarity and connector torque. Observe the shared serial-port conditions: COM3 RS-485 two-wire is unavailable when COM1 RS-485 two-wire is used, and simultaneous RS-232 use restricts the COM1 handshake arrangement.
Features:
- Display diagonal: 10.1 in
- Display technology: TFT LCD
- MT8000iE
Use MT8102iE only within the documented MT8000iE arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace MT8102iE within MT8000iE
Back up the EasyBuilder project and record Ethernet addresses, serial drivers and the original model label. Isolate the panel supply before loosening the brackets or disconnecting the power and controller wiring.
Check the MT8102iE model against any proposed iE1, iEU or cMT replacement. Weintek names cMT2108X2 as the successor with the same cutout, but different hardware resources and project requirements mean that it is not an identical replacement.
Restore the correct project and verify touchscreen response, controller data exchange and alarm behavior. Test the actual combination of serial ports in use, then check the enclosure seal and bracket tension before returning the panel to service.
Features:
- Front environment rating: NEMA 4 indoor
- Mating terminals and installed configuration
- Post-exchange functional validation
Use MT8102iE only within the documented MT8000iE arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for MT8102iE
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for MT8102iE must match the installed product identity and supplied configuration.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size27.10 x 21.30 x 3.64 cm
-
Net weight1.00 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537109090
-
OriginTaiwan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about MT8102iE
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How much flash and RAM does MT8102iE contain?
The original MT8102iE has 128 MB flash and 128 MB RAM; the larger capacities shown for its cMT successor do not apply to this model. -
What is the MT8102iE display resolution?
MT8102iE uses a 10.1-inch TFT display with 1024 x 600 pixels. -
Does MT8102iE have two Ethernet ports?
No. MT8102iE has one 10/100Base-T Ethernet interface. -
Can MT8102iE use COM1 and COM3 RS-485 two-wire simultaneously?
No. The manufacturer comparison states that COM3 RS-485 two-wire is unavailable when COM1 RS-485 two-wire is used. -
What panel cutout does MT8102iE require?
The MT8102iE installation guide specifies a 260 by 202 mm cutout and a maximum panel thickness of 4.5 mm. -
Is MT8102iE the same hardware as cMT2108X2?
No. Weintek names cMT2108X2 as the MT8102iE successor, but its processing, memory and Ethernet specifications differ. -
What should be retained in an MT8102iE spare-parts order?
Use the exact MT8102iE name, existing project target and port requirements. Do not substitute an iEU or cMT unit without checking the project and hardware differences. -
What should a distributor clarify when offering MT8102iE stock?
State the actual MT8102iE label, condition, supplied mounting brackets and power connector, and whether the original project backup is available from the customer.
READY TO VERIFY YOUR PART?
Get a MT8102iE quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
MT8102iETen-inch touchscreen operator panelManufacturer: WeintekView Details
-
6644789A2Controlway Daughter CardManufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
