PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Woodward
- 5501-367
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
5501-367 Analog input output module
Woodward 5501-367 is the low-voltage analog I/O module used in documented MicroNet Plus control-system configurations for turbine and engine applications. The plug-in VME-format board acquires process analog signals and delivers analog control commands through the matched field terminal assembly. Woodward documentation distinguishes it from the 5501-325 high-voltage variant, so the exact article, chassis slot, terminal module and signal ranges must be recorded before exchange. Commissioning should include channel-by-channel loop checks and diagnostic review.
BEFORE YOU BUY
Confirm the complete Analog input output module
ACTUAL APPLICATIONS
Application context for 5501-367
Manufacturer documentation places the Analog Input Output Module in practical automation applications. The three cases below describe different operating tasks in which 5501-367 performs its documented product-family role with the configured companion equipment.
- 01 · CHEMICAL & PETROCHEMICAL
Protect distillation control during feed-composition change
As part of the columns, reboilers and reflux circuits, 5501-367 provides its specified system function as a Analog Input Output Module. During feed-composition change, the system uses this function to coordinate temperature, pressure and inventory loops, helping it maintain separation performance. - 02 · GENERAL MANUFACTURING
Maintain pallet transfer with Analog Input process control
As part of the turntables, lifts and shuttle cars, 5501-367 serves its documented function as a Analog Input Output Module. During blocked-zone recovery, the system uses this function to re-establish the transfer path after the obstruction clears, helping it resume flow without losing tracking data. - 03 · MACHINERY MANUFACTURING
Maintain machine-tool automation with Analog Input
Inside the spindles, axes and tool changers, 5501-367 serves its documented function as a Analog Input Output Module. During cycle start, the system uses this function to coordinate the equipment states required by the active cycle, helping it complete the machining step with traceable status.
Technical specifications for 5501-367
-
Product Model5501-367
-
Product ParametersAnalog input output module
-
In stock1 unit
-
ManufacturerWoodward
-
Module VariantLow-voltage analog I/O
-
System FamilyMicroNet Plus control
-
Chassis FormatPlug-in VME module
-
Input FunctionProcess analog acquisition
-
Output FunctionAnalog control commands
-
Field InterfaceTerminal module connection
-
Diagnostic FunctionChannel and module status
-
Replacement Pair5501-325 high-voltage type
-
Installed Article5501-367 low-voltage type
-
Control UseTurbine and engine control
-
Signal WiringShielded analog circuits
-
Calibration CheckLoop values before service
-
Module SeatingBackplane connector engagement
-
CommissioningChannel-by-channel verification
-
Manufacturer ReferenceWoodward manual 25182
View all additional
Alternative Names
5501-367
5501 367
Woodward 5501-367
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 5501-367 to the installed MicroNet Plus
Woodward 5501-367 is a Analog input output module used in the MicroNet Plus.
Confirm module variant, chassis format, field terminals and the approved system configuration.
Use qualified personnel and follow the applicable Woodward installation and commissioning instructions.
Features:
- Exact identity: 5501-367
- Product class: Analog input output module
- Family: MicroNet Plus
The Woodward 5501-367 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 5501-367 identity before exchange
Replace 5501-367 only after matching its full product identity, system role and electrical interface.
Photograph terminals, cable routing, slot position and companion hardware before removal from the MicroNet Plus installation.
Follow the applicable Woodward service procedure and complete woodward manual 25182 before release.
Features:
- Match exact 5501-367 identity
- Confirm wiring and companion hardware
- Record the controlled functional test
The Woodward 5501-367 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 5501-367
- Woodward system references reviewed
- Exact hardware identity required before service
Documentation for Woodward 5501-367 must match the installed system and revision; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size38.1 × 9 × 6.5 cm
-
Shipping weight0.6 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 5501-367
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should technicians commission the module variant on 5501-367?
For 5501-367, run the documented channel test; the accepted module variant is Low-voltage analog I/O in the documented MicroNet Plus configuration. -
What fault can a mismatch in system family cause on 5501-367?
For 5501-367, review diagnostics before energising; the accepted system family is MicroNet Plus control in the documented MicroNet Plus configuration. -
Which companion hardware must agree with Plug-in VME module on 5501-367?
For 5501-367, match the mating assembly and revision; the accepted chassis format is Plug-in VME module in the documented MicroNet Plus configuration. -
What record proves the output function check for 5501-367 was completed?
For 5501-367, save the measured commissioning result; the accepted output function is Analog control commands in the documented MicroNet Plus configuration. -
How does diagnostic function Channel and module status define the correct 5501-367 installation?
For 5501-367, compare the installed nameplate and order code; the accepted diagnostic function is Channel and module status in the documented MicroNet Plus configuration. -
Which field check confirms 5501-367 low-voltage type for 5501-367?
For 5501-367, measure the live field condition safely; the accepted installed article is 5501-367 low-voltage type in the documented MicroNet Plus configuration. -
Why is the documented calibration check critical on 5501-367?
For 5501-367, confirm the engineering configuration; the accepted calibration check is Loop values before service in the documented MicroNet Plus configuration. -
What wiring decision for 5501-367 depends on Woodward manual 25182?
For 5501-367, inspect the exact terminal and cable route; the accepted manufacturer reference is Woodward manual 25182 in the documented MicroNet Plus configuration.
READY TO VERIFY YOUR PART?
Get a 5501-367 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
