PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
CMP1120 Display and operating unit
Woodward CMP1120 is the CMP1-120 display and operating unit used with the SYSTEM LINE protection and control system. Its backlit 128 x 240 pixel LCD presents the feeder diagram, measured values, switch positions and system messages.
The unit connects to the CSP2 base device through CAN bus and provides two RS-232 interfaces for computer access. Eleven configurable multicolor LEDs and two key switches support status indication and operating-mode selection, while the front panel is rated IP54 and the wide-range supply accepts AC or DC power.
The unit connects to the CSP2 base device through CAN bus and provides two RS-232 interfaces for computer access. Eleven configurable multicolor LEDs and two key switches support status indication and operating-mode selection, while the front panel is rated IP54 and the wide-range supply accepts AC or DC power.
BEFORE YOU BUY
Confirm the complete display and operating unit
ACTUAL APPLICATIONS
Application context for CMP1120
CMP1120 supports compatible SYSTEM LINE CMP1 installations across the application categories below, subject to system configuration.
-
01 · OIL & GAS
Petroleum Extraction and Natural Gas Distribution
Offshore Petroleum DevelopmentUrban Gas Distribution -
02 · CHEMICAL & PETROCHEMICAL
Basic Chemicals and Specialty Chemical Manufacturing
Petrochemical ManufacturingFine Chemical Manufacturing -
03 · METALS & MINING
Metal Production and Mineral Resource Extraction
Nonferrous MetallurgyNonmetallic Mining
Technical specifications for CMP1120
-
Product ModelCMP1120
-
Spare ModelCMP1-120
-
Product ParametersDisplay and operating unit
-
In stock1 unit
-
ManufacturerWoodward
-
Display resolution128 x 240 pixels
-
Display illuminationAutomatic backlit LCD
-
DC supply range19 to 395 V DC
-
AC supply range22 to 280 V AC
-
AC frequency40 to 70 Hz
-
Idle power consumption5 W DC / 5 VA AC
-
Maximum power consumption8 W DC / 8 VA AC
-
Front protectionIP54
-
Status indicators11 configurable multicolor LEDs
-
Serial interfacesTwo RS-232 ports, front and rear
-
System connectionCAN bus to CSP2
-
Mode selectorsTwo key-operated switches
-
Operating modesLocal/remote and normal/parameter setting
-
Fault signallingIntegrated system-fault signal relay
-
Auxiliary supply bufferingAt least 50 ms
View all additional
Alternative Names
CMP1120
CMP1-120 display and operating unit
SYSTEM LINE protection-system operator interface
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate CMP1120 display and operating unit
CMP1120 is the CMP1-120 display and operating unit in the SYSTEM LINE architecture. It exchanges operating information with the CSP2 base device through the documented CAN connection.
Select the correct auxiliary supply wiring for 19 to 395 V DC or 22 to 280 V AC at 40 to 70 Hz. The display unit consumes up to 8 W on DC or 8 VA on AC, separately from the CSP2 base device.
Use the front and rear RS-232 interfaces for the documented computer connection. Preserve LED assignments, display information and key-switch authorization settings when transferring the system configuration.
Features:
- Match the CSP2 CAN-bus connection
- Select the correct AC or DC auxiliary supply
- Preserve RS-232 access and key-switch authorization
The CMP1120 display and operating unit requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify CMP1120 display and operating unit
Record the CMP1120 / CMP1-120 label and front-panel arrangement, including its two key switches and the attached CAN and RS-232 connections. Retain the approved SYSTEM LINE configuration before removal.
Compare the replacement with the CMP1-120 ordering table, auxiliary power arrangement and front-panel cutout. The display unit has a net size of 307 x 246 x 55 mm and weighs 2.8 kg.
After fitting the display, verify the CAN link, measured-value display, message assignments and local/remote authorization. Test control commands only under the site-approved procedure before releasing the system.
Features:
- Verify the CMP1-120 ordering-table configuration
- Inspect the IP54 front sealing and control keys
- Validate displayed status and assigned LED messages
The CMP1120 display and operating unit requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the CMP1120 display and operating unit must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30.7 x 24.6 x 5.5 cm
-
Shipping weight2.80 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about CMP1120
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is CMP1120 identified in the SYSTEM LINE ordering table?
CMP1120 corresponds to the CMP1-120 notation: the CMP1 display/operating unit with two RS-232 interfaces, rear CAN bus and the standard SEG front-logo option. -
Does CMP1120 perform protection independently of the CSP2 base device?
CMP1120 is the display and operating unit. The SYSTEM LINE architecture connects it to the separate CSP2 protection/control base device through CAN bus. -
What must be checked before restoring local control through CMP1120?
Verify the local/remote and normal/parameter-setting key-switch positions on CMP1120, the CAN connection and the approved switching authorization before testing commands. -
Can CMP1120 use either AC or DC auxiliary power?
CMP1120 has a wide-range supply rated 19 to 395 V DC or 22 to 280 V AC at 40 to 70 Hz. Confirm the actual source and terminals before connection. -
How can a computer communicate with CMP1120?
CMP1120 provides two RS-232 interfaces, located at the front and rear, for the documented PC connection and parameter/data work. -
What should be reviewed when CMP1120 LEDs show unexpected messages?
CMP1120 has eleven configurable multicolor LEDs. Compare their configured assignments and the displayed system messages with the approved SYSTEM LINE configuration. -
Which identity details should accompany a CMP1120 quotation?
Request CMP1120 / CMP1-120, include a full label and front-panel photo, identify the installed CSP2 base device and state whether the standard front-logo version is required. -
What front-panel checks matter when accepting a CMP1120 spare?
Inspect the CMP1120 LCD, membrane keys, both key switches and front sealing surfaces. Verify the two RS-232 interfaces and CAN connector against the ordered unit.
READY TO VERIFY YOUR PART?
Get a CMP1120 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
CMP1120Display and operating unitManufacturer: WoodwardView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
