PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- XP Power
- DNR240PS24-I
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
DNR240PS24-I 240 W 24 V DC power supply
XP Power DNR240PS24-I is a single-phase AC-DC power supply in the DNR240 DIN rail range for industrial electronics. It provides a regulated 24 V DC output at up to 10 A, delivering 240 W for compatible automation and control loads.
The convection-cooled supply mounts on TS35 DIN rail and automatically selects its 90 to 132 V or 180 to 264 V AC input range. Output adjustment, DC status indication and the documented parallel-operation arrangement support power distribution requirements. Overload and overvoltage protection provide automatic recovery, while the supply delivers full rated power from −40 to +60 ℃ with derating above +60 ℃.
The convection-cooled supply mounts on TS35 DIN rail and automatically selects its 90 to 132 V or 180 to 264 V AC input range. Output adjustment, DC status indication and the documented parallel-operation arrangement support power distribution requirements. Overload and overvoltage protection provide automatic recovery, while the supply delivers full rated power from −40 to +60 ℃ with derating above +60 ℃.
BEFORE YOU BUY
Confirm the complete 240 w 24 v dc power supply
ACTUAL APPLICATIONS
Application context for DNR240PS24-I
DNR240PS24-I is a 240 W 24 V DC power supply in the DNR240 DIN rail power supplies range. Compatible configurations serve industrial automation, machine building, process industries. Suitability depends on the documented supply, connected loads and controller or machine configuration.
-
01 · INDUSTRIAL AUTOMATION
Industrial Manufacturing and Automated Factory Production
Factory Production AutomationIndustrial Process Monitoring -
02 · MACHINE BUILDING
Machine Building and Production Process Automation
Machine Control EngineeringAutomated Production Machinery -
03 · PROCESS INDUSTRIES
Industrial Process Production and Plant Automation
Process Measurement and ControlContinuous Production Automation
Technical specifications for DNR240PS24-I
-
Product ModelDNR240PS24-I
-
Product Parameters240 W 24 V DC power supply
-
In stock10 units
-
ManufacturerXP Power
-
Rated output power240 W
-
Output voltage24 V DC
-
Output current10 A
-
AC input range90–132 / 180–264 V AC
-
DC input range210–375 V DC
-
Input frequency47–63 Hz
-
Output adjustment22.5–28.5 V
-
Efficiency89% typical
-
Ripple and noise100 mV peak-to-peak
-
Line regulation±0.5% maximum
-
Load regulation±1% maximum
-
Input-output isolation3000 V AC
-
Start-up delay<1 s
-
Operating temperature−40 to +70 ℃; derating above +60 ℃
-
Parallel capacity3 units maximum
View all additional
Alternative Names
DNR240PS24-I
DNR240 DIN rail power supplies 240 W 24 V DC power supply
240 W 24 V DC power supply DNR240PS24-I
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate DNR240PS24-I 240 w 24 v dc power supply
XP Power DNR240PS24-I is a single-phase AC-DC power supply in the DNR240 DIN rail range for industrial electronics. It provides a regulated 24 V DC output at up to 10 A, delivering 240 W for compatible automation and control loads.
Match DNR240PS24-I to the installed DNR240 DIN rail power supplies configuration. Compare the supply, electrical interfaces, connectors and companion equipment with the applicable drawing before reconnecting the article.
Preserve the approved configuration and complete the documented checks for the connected 240 w 24 v dc power supply. Record the verified connections and final operating results with the equipment record.
Features:
- Rated output power: 240 W
- Output voltage: 24 V DC
- Output current: 10 A
The DNR240PS24-I 240 w 24 v dc power supply requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify DNR240PS24-I 240 w 24 v dc power supply
Verify the complete DNR240PS24-I identity and its 240 w 24 v dc power supply role before exchange. Match the installed revision, electrical interfaces and companion hardware; a similar housing does not establish interchangeability.
Record the wiring, grounding, connector allocation and configuration associated with DNR240PS24-I. Isolate the affected equipment according to its applicable instructions before disconnecting the article.
After fitting the verified DNR240PS24-I, restore the approved connections and configuration. Complete the affected signal, communication or power checks and retain the acceptance results for the supplied article.
Features:
- Rated output power: 240 W
- Output voltage: 24 V DC
- Output current: 10 A
The DNR240PS24-I 240 w 24 v dc power supply requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the DNR240PS24-I 240 w 24 v dc power supply must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size14.20 × 12.50 × 8.30 cm
-
Shipping weight1.36kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504401400
-
OriginUnited Kingdom
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about DNR240PS24-I
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the documented role of DNR240PS24-I?
XP Power DNR240PS24-I is a single-phase AC-DC power supply in the DNR240 DIN rail range for industrial electronics. It provides a regulated 24 V DC output at up to 10 A, delivering 240 W for compatible automation and control loads. -
Which interfaces distinguish DNR240PS24-I?
The convection-cooled supply mounts on TS35 DIN rail and automatically selects its 90 to 132 V or 180 to 264 V AC input range. Output adjustment, DC status indication and the documented parallel-operation arrangement support power distribution requirements. Overload and overvoltage protection provide automatic recovery, while the supply delivers full rated power from −40 to +60 ℃ with derating above +60 ℃. -
Which rated output power applies to DNR240PS24-I?
240 W is the supported value for DNR240PS24-I. Preserve the associated electrical and companion-hardware configuration. -
What does output voltage specify for DNR240PS24-I?
24 V DC. This describes the identified 240 w 24 v dc power supply and does not establish ratings for a different article. -
What must be recorded before exchanging DNR240PS24-I?
Record the wiring, grounding, connector allocation and configuration associated with DNR240PS24-I. Isolate the affected equipment according to its applicable instructions before disconnecting the article. -
Which acceptance check follows a DNR240PS24-I replacement?
After fitting the verified DNR240PS24-I, restore the approved connections and configuration. Complete the affected signal, communication or power checks and retain the acceptance results for the supplied article. -
Which identification should accompany a DNR240PS24-I order?
Provide DNR240PS24-I, quantity, installed-equipment identification and connector photographs. State whether the request includes companion hardware or only the 240 w 24 v dc power supply. -
What should be inspected when DNR240PS24-I arrives?
Compare the DNR240PS24-I label, connector arrangement and physical condition with the ordered article. Record any discrepancy before fitting it to the DNR240 DIN rail power supplies equipment.
READY TO VERIFY YOUR PART?
Get a DNR240PS24-I quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
