PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
CP471-00 S1 Field Control Processor Module
Yokogawa CP471-00 S1 is a field control processor module in the CENTUM VP range. It performs field control processing in the documented CENTUM field control units. This execution is the basic non-explosion-protected processor version.
A pair of matching processors supports dual-redundant operation with the Vnet/IP interface. Battery-backed main memory can retain data for up to 72 hours and requires at least 48 hours to recharge. Verify the field control unit, software patches and EC401 style before replacing an installed processor; CP471 and CP461 cannot coexist as a redundant pair.
A pair of matching processors supports dual-redundant operation with the Vnet/IP interface. Battery-backed main memory can retain data for up to 72 hours and requires at least 48 hours to recharge. Verify the field control unit, software patches and EC401 style before replacing an installed processor; CP471 and CP461 cannot coexist as a redundant pair.
BEFORE YOU BUY
Confirm the complete field control processor module
ACTUAL APPLICATIONS
Application context for CP471-00 S1
CP471-00 S1 is a field control processor module in the CENTUM VP range. It serves oil & gas, chemical processing, power generation. Suitability depends on the selected process, electrical ratings and installed configuration.
-
01 · OIL & GAS
Oil Refining and Natural Gas Production
Petroleum Refining and ProcessingNatural Gas Processing Production -
02 · CHEMICAL PROCESSING
Chemical Manufacturing and Petrochemical Production
Industrial Chemical ManufacturingPetrochemical Processing and Production -
03 · POWER GENERATION
Electric Power Generation and Energy Production
Thermal Power GenerationBiomass Energy and Cogeneration
Technical specifications for CP471-00 S1
-
Product ModelCP471-00 S1
-
Product ParametersField Control Processor Module
-
In stock1 unit
-
ManufacturerYokogawa
-
Battery-backed memory retention72 hours maximum
-
Battery recharge interval48 hours minimum
-
Redundant processor quantity2 modules
-
Vnet/IP communication pathsDual-redundant
-
Minimum control function releaseCENTUM VP R5.01, specified patches required
-
Companion EC401 minimum styleS3
-
Explosion protection executionNon-explosion-protected -0 type
-
Environment optionBasic type
View all additional
Alternative Names
CP471-00 S1
CENTUM VP Field Control Processor Module
VP 72 hours maximum battery-backed memory retention
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate CP471-00 S1 field control processor module
Yokogawa CP471-00 S1 is a field control processor module in the CENTUM VP range. It performs field control processing in the documented CENTUM field control units. This execution is the basic non-explosion-protected processor version.
A pair of matching processors supports dual-redundant operation with the Vnet/IP interface. Battery-backed main memory can retain data for up to 72 hours and requires at least 48 hours to recharge. Verify the field control unit, software patches and EC401 style before replacing an installed processor; CP471 and CP461 cannot coexist as a redundant pair.
Use the applicable CENTUM VP documentation for CP471-00 S1. Verify the complete configuration, connection assignments and environmental limits, then record the functional checks before commissioning.
Features:
- Battery-backed memory retention: 72 hours maximum
- Battery recharge interval: 48 hours minimum
- Redundant processor quantity: 2 modules
The CP471-00 S1 field control processor module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify CP471-00 S1 field control processor module
Identify the complete CP471-00 S1 nameplate and the installed CENTUM VP configuration before replacement. Match all connectors and the documented electrical ratings.
A pair of matching processors supports dual-redundant operation with the Vnet/IP interface. Battery-backed main memory can retain data for up to 72 hours and requires at least 48 hours to recharge. Verify the field control unit, software patches and EC401 style before replacing an installed processor; CP471 and CP461 cannot coexist as a redundant pair.
After fitting CP471-00 S1, restore the recorded configuration and verify every affected signal or communication path. Retain diagnostic results and the acceptance record.
Features:
- Battery-backed memory retention: 72 hours maximum
- Battery recharge interval: 48 hours minimum
- Redundant processor quantity: 2 modules
The CP471-00 S1 field control processor module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the CP471-00 S1 field control processor module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.2 × 14.6 × 19.8cm
-
Shipping weight0.60kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginJapan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about CP471-00 S1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which processor option is selected by the -00 suffix?
CP471-00 S1 is the basic non-explosion-protected CP471 execution. -
Is a mixed CP471 and CP461 processor pair permitted?
CP471-00 S1 must not coexist with CP461 in a dual-redundant pair. Match the documented processor arrangement. -
What is the battery memory-retention limit for the basic processor?
CP471-00 S1 provides a maximum 72 hours of battery-backed main-memory retention under the documented conditions. -
How much charging time does the basic CP471 battery require?
CP471-00 S1 requires at least 48 hours for battery recharge before relying on the specified backup duration. -
What CENTUM release is required by CP471-00?
CP471-00 S1 requires CENTUM VP R5.01 or later and the specified CP471 support patches for affected releases. -
Can an early EC401 coupler be retained with the basic CP471?
CP471-00 S1 requires an EC401 ESB coupler with style S3 or later. -
What should be provided for a basic CP471 spare enquiry?
CP471-00 S1 sourcing requires the full processor label, basic option code, redundant partner label and station release. -
What incoming checks matter for a basic processor module?
Before fitting CP471-00 S1, compare the -00 suffix, battery condition, connectors and existing processor-pair configuration.
READY TO VERIFY YOUR PART?
Get a CP471-00 S1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
