PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Yokogawa
- Yokogawa ProSafe-RS
- SDV531-S13 S1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
SDV531-S13 S1 digital output module
Yokogawa SDV531-S13 S1 is a digital output module documented for ProSafe-RS FIO digital output modules. It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete digital output module
ACTUAL APPLICATIONS
Where SDV531-S13 S1 Fits in Power, Chemicals And Oil And Gas
Power, chemicals and oil and gas uses depend on installation compatibility, operating conditions and project requirements.
-
01 · POWER GENERATION
Combined Cycle Electricity Generation and Plant Utility Operations
Combined cycle electricity generation for utility power supply operations.Heat recovery and steam production supporting thermal electricity generation. -
02 · CHEMICAL PROCESSING
Polymer Manufacturing, Oleochemical Production and Chemical Materials
Polyethylene manufacturing and polymer processing for industrial material production.Oleochemical production for renewable fuels and personal care ingredients. -
03 · OIL & GAS
LNG Receiving, Storage and Natural Gas Distribution
Liquefied natural gas receiving and storage for energy distribution.Natural gas regasification and delivery into regional supply networks.
Technical specifications for SDV531-S13 S1
-
Product ModelSDV531-S13 S1
-
Product Parametersdigital output module
-
In stock1 unit
-
ManufacturerYokogawa
-
Output channels8 isolated channels
-
Rated output voltage24 V DC
-
Output voltage drop1 V maximum
-
External power supply24 V DC +20/-10%, 5 A minimum
-
Output current0.6 A maximum per line
-
Total load current4.8 A maximum
-
Minimum load current35 mA
-
Load resistance40 to 685 ohm
-
Output response time30 ms maximum
-
Withstand voltage2 kV AC for 1 minute
-
5 V current consumption280 mA
-
24 V current consumption140 mA
-
Module constructionStandard type
-
Operating styleS1
-
Module mass0.28 kg with pressure-clamp/MIL connector
View all additional
Alternative Names
SDV531 S13 S1
ProSafe-RS FIO digital output modules digital output module
Yokogawa digital output module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match SDV531-S13 S1 to the installed ProSafe-RS FIO digital output modules
Yokogawa SDV531-S13 S1 is a digital output module for the ProSafe-RS FIO digital output modules. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare external power supply (24 V DC +20/-10%, 5 A minimum), output current (0.6 A maximum per line) and total load current (4.8 A maximum) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: SDV531-S13 S1
- Product class: digital output module
- Family: ProSafe-RS FIO digital output modules
The Yokogawa SDV531-S13 S1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete SDV531-S13 S1 identity before exchange
Replace SDV531-S13 S1 only after matching the complete article code, digital output module, installed ProSafe-RS FIO digital output modules role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: SDV531-S13 S1
- Product class: digital output module
- Family check: ProSafe-RS FIO digital output modules
The Yokogawa SDV531-S13 S1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for SDV531-S13 S1
- Yokogawa ProSafe-RS FIO digital output modules references reviewed
- Exact Yokogawa identity required before service
Documentation for Yokogawa SDV531-S13 S1 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size17 × 14 × 7 cm
-
Shipping weight0.50 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389000
-
OriginJapan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about SDV531-S13 S1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is the field load verified?
For SDV531-S13 S1, Compare load current and external supply limits. Verify output channels (8 isolated channels) against the manufacturer document before service. -
What should distributors quote for SDV531-S13 S1?
For SDV531-S13 S1, Provide quantity, destination and a clear nameplate photo. Verify rated output voltage (24 V DC) against the manufacturer document before service. -
How should an MRO spare be matched?
For SDV531-S13 S1, Record the rack, adjacent modules and shutdown window. Verify output voltage drop (1 V maximum) against the manufacturer document before service. -
Will SDV531-S13 S1 fit this safety node?
For SDV531-S13 S1, Confirm the installed node type, suffix and connector arrangement. Verify external power supply (24 V DC +20/-10%, 5 A minimum) against the manufacturer document before service. -
What replaces SDV531-S13 S1 correctly?
For SDV531-S13 S1, Match the full order code, style and electrical rating. Verify output current (0.6 A maximum per line) against the manufacturer document before service. -
Which label details identify SDV531-S13 S1?
For SDV531-S13 S1, Use the nameplate, suffix and terminal configuration. Verify total load current (4.8 A maximum) against the manufacturer document before service. -
What should be inspected on arrival?
For SDV531-S13 S1, Inspect the housing, connector pins and exact label. Verify minimum load current (35 mA) against the manufacturer document before service. -
Which checks follow SDV531-S13 S1 installation?
For SDV531-S13 S1, Check supply, channel response and diagnostics. Verify load resistance (40 to 685 ohm) against the manufacturer document before service.
READY TO VERIFY YOUR PART?
Get a SDV531-S13 S1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
