


























COBUX-HW INTERFACE CARD
Type: COBUX-HW Interface Card
Operating Voltage:24V DC
Operating Temperature Range:-20°C to +70°C
Storage Temperature Range:
-40°C to +85°C.
Analog inputs: 0–10 V, ±10 V, 4–20 mA
Analog outputs: 0–10 V, 4–20 mA
SOE Time Keeper Master
Analog inputs: 0–10 V, 4–20 mA
Analog outputs: 0–10 V, 4–20 mA
Power Supply:24 V DC (±10%)
Supply Voltage:24V DC (19.2–28.8V) via backplane
Power Consumption:1.8W (typical), 2.5W (max)
Isolation 1500V AC (channel-to-logic)
Control Board
Power Supply:24 V DC
Differential: ±12 V.
Power consumption: < 5 W
Single-ended: 0–24 V
Output Voltage:
TTL: 0–5 V.
HTL: 0–24 V
DIGITAL MONITORING MODULE
Analog inputs:4–20 mA, 0–10 VDC
Power Supply: 24 VDC or 110–240 VAC
Operating Temperature: -25°C to +70°C (-13°F to +158°F)
Humidity: 5–95% RH (non-condensing)
DRIVE CONTROL UNI
DRIVE CONTROL UNIT
Input Voltage: 24 VDC
Analog inputs (0–10 VDC, 4–20 mA)
Operating Temperature:
0°C to +40°C (+32°F to +104°F)
Storage Temperature:
-40°C to +70°C (-40°F to +158°F).
Humidity: 5–95% RH (non-condensing)
CIRCUIT BOARD
Voltage: 24 V DC (±10%)
Power Consumption: ≤4 W
Digital I/O: 24 V DC
Analog I/O: 4–20 mA, 0–10 V
Field-to-System: 1500 V AC reinforced isolation.
Channel-to-Channel: 250 V AC
Operating Temperature: -25°C to +70°C (-13°F to +158°F).
Storage Temperature: -40°C to +85°C (-40°F to +185°F).
Humidity: 5–95% (non-condensing)
Signal Processing Module
Voltage: 24 V DC (±10%)
Power Consumption: ≤5 W
Input Channels: 16 channels
Types: 4–20 mA, 0–10 V, RTD
Resolution: 16-bit ADC
Digital Inputs: 24 V DC
Field-to-System: 1500 V AC reinforced isolation.
Channel-to-Channel: 250 V AC
Operating Temperature: -25°C to +70°C (-13°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5–95% (non-condensing)
Server motherboard
Slots: 4x DDR4 DIMM slots
Capacity: Up to 128 GB ECC RAM
Operating Temperature: 0°C to +60°C (32°F to +140°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 10–90% (non-condensing)
Vibration Resistance: 5–500 Hz
Ethernet Ports: 4x 10/100/1000 Mbps (RJ45)
with optional 1 Gbps/10 Gbps SFP+ fiber ports
Protocols: PROFINET, EtherNet/IP, OPC UA, Modbus TCP
Signal concentrator board
Voltage: 24 V DC (±10%)
Power Consumption: ≤6 W
Input Channels: 32 channels
Digital Inputs: 24 V DCc
Analog Inputs: 4–20 mA, 0–10 V, RTD
Channel-to-Channel: 250 V AC
Field-to-System: 1500 V AC reinforced isolation
Ethernet Port: 10/100 Mbps (RJ45) for integration with PLC networks
Operating Temperature: -25°C to +70°C (-13°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Control board
Voltage: 24 V DC (±10%)
Power Consumption: ≤10 W
Processor: 32-bit ARM Cortex-R5F
Clock Speed: 500 MHz
Channels: 32 channels
Voltage: 24 V DC
Field-to-System: 1500 V AC reinforced isolation
Channel-to-Channel: 250 V AC
Operating Temperature: -25°C to +70°C (-13°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5–95% (non-condensing)
Vibration Resistance: 5–100 Hz
Control Board
Voltage: 24 V DC (±10%)
Power Consumption: ≤15 W
RAM: 1–2 GB DDR3
Storage: 4–8 GB Flash
Video Input: VGA/HDMI for external display connectivity.
USB Ports: 2x USB 2.0/3.0 for peripherals
VDU Board
Voltage: 24 V DC (±10%)
Power Consumption: ≤15 W
RAM: 1–2 GB DDR3
Storage: 4–8 GB Flash
Video Input: VGA/HDMI for external display connectivity.
USB Ports: 2x USB 2.0/3.0 for peripherals (e.g., keyboard, mouse).
Ethernet: 10/100/1000 Mbps (RJ45) for network integration
Channel Control Unit
Voltage: 24 V DC (±10%)
Power Consumption: ≤4 W
Digital: 24 V DC (sink/source).
Analog: 4–20 mA, 0–10 V
Analog inputs: ±0.05% of full scale (at 25°C).
Digital response time: ≤1 ms
Overvoltage Protection: ±30 V
Channel Control Unit
Voltage: 24 V DC (±10%)
Power Consumption: ≤4 W
Digital: 24 V DC (sink/source).
Analog: 4–20 mA, 0–10 V
Analog inputs: ±0.05% of full scale (at 25°C).
Digital response time: ≤1 ms
Overvoltage Protection: ±30 V
Removable screw terminals (0.2–2.5 mm² / AWG 24–12)
CONNECTION UNIT
Model: PFSK108
Part Number: YM322001-EH
Voltage: 24 V DC
Wire Gauge Support: 0.2–2.5 mm²
Max Current: 10 A
Digital I/O (24 V DC).
Analog signals (0–10 V, 4–20 mA).
Analog Input Module
Model: PFSK110
Part Number: YM322001-EP
Voltage: 24 V DC (±10%)
Power Consumption: ≤3 W
Voltage: 0–10 V, ±10 V
Current: 0–20 mA, 4–20 mA
Accuracy: ±0.1% of full scale (25°C)
Sampling Rate: 100 samples/sec per channel
Operating Temperature: -20°C to +60°C (-4°F to +140°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5–95% (non-condensing)
Vibration Resistance: 5–100 Hz
Signal Processing Control PLC Circuit Board
Model Number: PFSK106
Part Number: YM322001-EC
Voltage: 24 V DC (±10%)
Power Consumption: ≤5 W
Digital Inputs: 16 channels
Flash: 512 KB
Analog Inputs: 8 channels
Power Factor Controller
Sensitivity: ≥ 20 mA.
Frequency range: 50 or 60 Hz +/- 5%
Input current impedance: < 0.1 Ohm
Controller energy consumption: ≤ 15VA
Maximum inductive load AC 250V/2.0A
Voltage: ±1%
Current: ±1%
Power factor: ±1.5%
Active power: ±2.5%
Reactive power: ±2.5%
Digital Input Module
DIGITAL INPUT MODULE
SYMPHONY PLUS
INFI 90
DI Module. 16 CH
Universal, 32 Jumpers
Universal Signal Converter
Brand:ABB
Input Range:0 → 10 V, 0 → 20mA
Mounting Type:DIN Rail
Operating Temperature Range:-20 → +60°C
Minimum Operating Temperature:-20°C
Maximum Operating Temperature:+60°C
Driver board
Input Voltage Range: Typically 24V DC
Output Voltage Range: Dependent on the connected load
Current Rating: Up to 10A
Power Rating: Typically around 240W
Operating Frequency: 1kHz to 20kHz
IGBT MODULE
INVERTER TRIGGER DRIVER BOARD
PROTECTION
Rated Voltage (V_CE):650V
Rated Current (I_C):70A
Peak Current (I_C_peak):Up to 180A
Power Dissipation:150W to 300W
Switching Frequency:Up to 20 kHz
Thermal Resistance (R_thJC):1.5°C/W to 2.5°C/W
Junction Temperature (T_j):-40°C to 150°C

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.