PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Advant OCS and Advant-800xA
- ABB AC 800PEC
- 3BHE028122R0001 XFD213A
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3BHE028122R0001 XFD213A ssi speed sensor interface
ABB 3BHE028122R0001 XFD213A is a ssi speed sensor interface in the ABB AC 800PEC. The article-specific data identifies its control role, communication or signal interface and installed system compatibility. Confirm the complete nameplate, electrical class, revision, companion equipment and controlled configuration before ordering.
BEFORE YOU BUY
Confirm the complete ssi speed sensor interface
ACTUAL APPLICATIONS
Application context for 3BHE028122R0001 XFD213A
Manufacturer documentation places the ssi speed sensor interface in practical process applications. The three cases below describe different operating tasks in which 3BHE028122R0001 XFD213A performs its documented product-family role with the configured companion equipment.
-
01 · POWER GENERATION
Govern turbine auxiliary control with Ssi Speed
Within the lube-oil pumps and turning gear, 3BHE028122R0001 XFD213A supports the configured automation role as a ssi speed sensor interface. During unit run-up, the system uses this function to coordinate permissives and auxiliary equipment states, helping it support a stable transition to rated operation. -
02 · FOOD & BEVERAGE
Govern recipe mixing with Ssi Speed process control
Inside the mixers and ingredient skids, 3BHE028122R0001 XFD213A performs its assigned control role as a ssi speed sensor interface. During recipe changeover, the system uses this function to sequence material transfers and equipment permissives, helping it preserve the verified batch state. -
03 · WATER & WASTEWATER
Monitor chemical dosing with Ssi Speed process control
Across the metering pumps and contact tanks, 3BHE028122R0001 XFD213A serves its documented function as a ssi speed sensor interface. During dose-setpoint correction, the system uses this function to match reagent flow to the measured process load, helping it keep treatment chemistry inside its operating target.
Technical specifications for 3BHE028122R0001 XFD213A
-
Product Model3BHE028122R0001 XFD213A
-
Product Parametersssi speed sensor interface
-
In stock1 unit
-
ManufacturerABB
-
Operating Temperature-25°C to +70°C (-13°F to +158°F)
-
Storage Temperature-40°C to +85°C (-40°F to +185°F)
-
Relative Humidity5% to 95% (non-condensing)
-
Frequency62.5 kHz
-
Cable Length SupportUp to 350 meters
-
Internal Logic Supply+5V DC
-
Encoder Supply+24V DC
-
Current LimitTypically 250mA
-
Exact Article Code3BHE028122R0001 XFD213A
-
Board DesignationXFD213A
-
Product FamilyABB AC 800PEC
-
Component TypeSsi Speed Sensor Interface
-
Assembly ClassABB PCB assembly
-
System InterfaceABB AC 800PEC control interface
-
Control SupplyDocumented rack control supply
View all additional
Alternative Names
3BHE028122R0001 XFD213A
ABB ssi speed sensor interface
ABB AC 800PEC ssi speed sensor interface
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3BHE028122R0001 XFD213A to the installed ABB AC 800PEC
ABB 3BHE028122R0001 XFD213A is a ssi speed sensor interface for the ABB AC 800PEC. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare frequency (62.5 kHz), cable length support (Up to 350 meters) and internal logic supply (+5V DC) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3BHE028122R0001 XFD213A
- Product class: ssi speed sensor interface
- Family: ABB AC 800PEC
The ABB 3BHE028122R0001 XFD213A requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3BHE028122R0001 XFD213A identity before exchange
Replace 3BHE028122R0001 XFD213A only after matching the complete article code, ssi speed sensor interface, installed ABB AC 800PEC role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3BHE028122R0001 XFD213A
- Product class: ssi speed sensor interface
- Family check: ABB AC 800PEC
The ABB 3BHE028122R0001 XFD213A requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 3BHE028122R0001 XFD213A
- Product family: ABB AC 800PEC
- Exact ABB identity required before service
Documentation for ABB 3BHE028122R0001 XFD213A must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30 × 6.3 cm
-
Shipping weight0.24 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3BHE028122R0001 XFD213A
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should the signal or power interface for 3BHE028122R0001 XFD213A be verified?
Compare every connected circuit with the controlled drawing and verify the approved electrical class before connecting 3BHE028122R0001 XFD213A. -
Which electrical checks apply before energising 3BHE028122R0001 XFD213A?
Confirm the documented supply, interface, insulation condition and protective earth before energising 3BHE028122R0001 XFD213A. -
What commissioning evidence is needed after fitting 3BHE028122R0001 XFD213A?
Record power-up status, diagnostics, the affected function test and final maintenance approval for 3BHE028122R0001 XFD213A. -
Which companion hardware must match 3BHE028122R0001 XFD213A?
Verify the documented rack, control unit, power stage, connector assembly and adjacent hardware paired with 3BHE028122R0001 XFD213A. -
What drawings should engineering review before installing 3BHE028122R0001 XFD213A?
Review the installed hardware list, cabinet drawing, connection diagram and controlled ABB AC 800PEC service documentation for 3BHE028122R0001 XFD213A. -
How is interchangeability assessed for 3BHE028122R0001 XFD213A?
Physical similarity is insufficient; 3BHE028122R0001 XFD213A must match the complete article identity, interface and approved system configuration. -
What diagnostics should maintenance review for 3BHE028122R0001 XFD213A?
Review power, communication, gate, I/O or controller status relevant to 3BHE028122R0001 XFD213A, then record resolved alarms. -
Which nameplate fields identify 3BHE028122R0001 XFD213A for a maintenance replacement?
Match the complete ABB article code 3BHE028122R0001 XFD213A, its board or device designation, product family and installed position.
READY TO VERIFY YOUR PART?
Get a 3BHE028122R0001 XFD213A quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
