PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
CI830 3BSE013252R1 PROFIBUS-DP communication interface
ABB CI830 3BSE013252R1 is a PROFIBUS-DP communication interface for the ABB S800 I/O field communication. Configure the CI830 station address and bus rate to match the documented PROFIBUS-DP master and approved S800 I/O database. Restore the module order, termination units, power supervision and ModuleBus diagnostics before enabling field control. Confirm the exact article, installed interfaces and controlled commissioning record before ordering.
BEFORE YOU BUY
Confirm the complete PROFIBUS-DP communication interface
ACTUAL APPLICATIONS
Application context for CI830 3BSE013252R1
Manufacturer documentation places the Profibus-Dp Communication Interface in practical network applications. The three cases below describe different operating tasks in which CI830 3BSE013252R1 performs its documented product-family role with the configured companion equipment.
- 01 · WATER & WASTEWATER
Support treatment-area fiber ring with Profibus Dp
Within the managed switches and process-area controllers, CI830 3BSE013252R1 supports the configured automation role as a Profibus-Dp Communication Interface. During single-link interruption, the system uses this function to move process traffic over the remaining network path, helping it keep the treatment process visible during the link event. - 02 · FOOD & BEVERAGE
Maintain recipe-server exchange during recipe download
Across the batch controllers, HMIs and recipe servers, CI830 3BSE013252R1 serves its documented function as a Profibus-Dp Communication Interface. During recipe download, the system uses this function to deliver the approved recipe data to the production cell, helping it start the batch with the intended process parameters. - 03 · AUTOMOTIVE
Regulate quality-station data transfer during inspection-result release
In the automation chain for the inspection controllers and production databases, CI830 3BSE013252R1 provides its specified system function as a Profibus-Dp Communication Interface. During inspection-result release, the system uses this function to deliver measured quality results to the production record, helping it retain traceability before downstream release.
Technical specifications for CI830 3BSE013252R1
-
Product ModelCI830 3BSE013252R1
-
Product ParametersPROFIBUS-DP communication interface
-
In stock1 unit
-
ManufacturerABB
-
Article Number3BSE013252R1
-
ProtocolPROFIBUS-DP
-
Maximum Bus Rate12 Mbit/s
-
Supply Voltage24 V DC ±20%
-
Typical Supply Current50 mA
-
Typical Power Consumption1.2 W
-
Field-to-Bus Isolation500 V DC
-
Operating Temperature-20°C to +55°C
-
Network Connector9-pin D-sub PROFIBUS
-
ModuleBus FunctionS800 I/O cluster communication
-
Service InterfaceSoftware download interface
-
Mounting MethodS800 I/O DIN-rail station
View all additional
Alternative Names
CI830 3BSE013252R1
ABB S800 I/O field communication
PROFIBUS-DP communication interface
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match CI830 3BSE013252R1 to the installed ABB S800 I/O field communication
ABB CI830 3BSE013252R1 is a PROFIBUS-DP communication interface documented for the ABB S800 I/O field communication. Configure the CI830 station address and bus rate to match the documented PROFIBUS-DP master and approved S800 I/O database.
Restore the module order, termination units, power supervision and ModuleBus diagnostics before enabling field control. Confirm 24 v dc ±20%, 50 ma, mechanical location and the approved system configuration before connection.
Check termination, shielding, node diagnostics and cyclic I/O exchange at the selected data rate before process release. Use qualified personnel, retain the official manufacturer instructions at the work location and save the final commissioning results with the equipment record.
Features:
- Exact identity: CI830 3BSE013252R1
- Product class: PROFIBUS-DP communication interface
- Family: ABB S800 I/O field communication
The ABB CI830 3BSE013252R1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete CI830 3BSE013252R1 configuration before exchange
Replace CI830 3BSE013252R1 only after matching the full product identity, 24 v dc ±20%, 50 ma and installed system role. A similar family name or partial article number does not establish direct interchangeability.
Photograph the module label, rack or control-unit position, every connector, cable route, shield, earth point and companion module before removal. Compare the documented electrical and communication limits against the saved project or rack configuration.
After installation, restore the controlled configuration and complete the model-specific checks described in the official manufacturer document. Record status indications, diagnostics, signal or communication results and the final acceptance evidence before release.
Features:
- Match exact CI830 3BSE013252R1 identity
- Confirm 50 mA
- Record S800 I/O cluster communication
The ABB CI830 3BSE013252R1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Technical values prepared for CI830 3BSE013252R1
- ABB manufacturer pages attached
- Exact identity required before installation
Documentation for ABB CI830 3BSE013252R1 must match the installed system and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size13.5 × 5.8 × 8.6 cm
-
Shipping weight0.3 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8517620090
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about CI830 3BSE013252R1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which final test proves correct operation of CI830 3BSE013252R1?
For CI830 3BSE013252R1, verify article number: 3BSE013252R1. Retain the result with the quotation or maintenance record. -
Which exact order-code details should a distributor confirm for CI830 3BSE013252R1?
For CI830 3BSE013252R1, verify protocol: PROFIBUS-DP. Retain the result with the quotation or maintenance record. -
What should maintenance photograph before removing CI830 3BSE013252R1?
For CI830 3BSE013252R1, verify maximum bus rate: 12 Mbit/s. Retain the result with the quotation or maintenance record. -
Which electrical rating governs replacement of CI830 3BSE013252R1?
For CI830 3BSE013252R1, verify supply voltage: 24 V DC ±20%. Retain the result with the quotation or maintenance record. -
How should engineering commission CI830 3BSE013252R1?
For CI830 3BSE013252R1, verify typical supply current: 50 mA. Retain the result with the quotation or maintenance record. -
What compatibility check prevents a wrong substitute for CI830 3BSE013252R1?
For CI830 3BSE013252R1, verify typical power consumption: 1.2 W. Retain the result with the quotation or maintenance record. -
Which field connection needs verification on CI830 3BSE013252R1?
For CI830 3BSE013252R1, verify field-to-bus isolation: 500 V DC. Retain the result with the quotation or maintenance record. -
What receiving inspection applies to CI830 3BSE013252R1?
For CI830 3BSE013252R1, verify operating temperature: -20°C to +55°C. Retain the result with the quotation or maintenance record.
READY TO VERIFY YOUR PART?
Get a CI830 3BSE013252R1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
