PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IEMMU22 module mounting unit
ABB IEMMU22 is a module mounting unit for the ABB Bailey INFI 90 systems. It is used to 483 mm / 19 inch. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete module mounting unit
ACTUAL APPLICATIONS
Application context for IEMMU22
Manufacturer documentation places the Module Mounting Unit in practical generic applications. The three cases below describe different operating tasks in which IEMMU22 performs its documented product-family role with the configured companion equipment.
- 01 · MACHINERY MANUFACTURING
Protect machine-tool automation during cycle start
Across the spindles, axes and tool changers, IEMMU22 handles its designated signal or control duty as a Module Mounting Unit. During cycle start, the system uses this function to coordinate the equipment states required by the active cycle, helping it complete the machining step with traceable status. - 02 · POWER GENERATION
Route cooling-water circulation with Module Mounting
During operation of the circulating pumps and heat exchangers, IEMMU22 supports the configured automation role as a Module Mounting Unit. During controlled shutdown, the system uses this function to sequence redundant equipment around the operating unit, helping it keep heat rejection available to the process. - 03 · FOOD & BEVERAGE
Route aseptic filling with Module Mounting process control
Across the fillers and container conveyors, IEMMU22 serves its documented function as a Module Mounting Unit. During line-speed ramp, the system uses this function to keep container flow synchronized with filling demand, helping it move accepted containers toward inspection.
Technical specifications for IEMMU22
-
Product ModelIEMMU22
-
Product Parametersmodule mounting unit
-
In stock1 unit
-
ManufacturerABB
-
Model NumberIEMMU22
-
Module Capacity12 modules
-
Cabinet Standard483 mm / 19 inch
-
Primary AC Supply120 / 240 V AC
-
Primary DC Supply24 / 48 V DC
-
Regulated Rail 1+5 V DC
-
Regulated Rail 2+15 V DC
-
Regulated Rail 3-15 V DC
-
Humidity Range0 to 95% noncondensing
-
Storage Temperature-40 to +85 °C
-
Vibration Range2 to 100 Hz
-
Peak Vibration0.7 g above 13.2 Hz
-
Low-frequency Travel12 mm below 13.2 Hz
-
Air QualityNoncorrosive atmosphere
-
Installed CapacityOne 12-position front rack
View all additional
Alternative Names
IEMMU22
ABB Bailey INFI 90 systems module mounting unit
ABB module mounting unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match IEMMU22 to the installed ABB Bailey INFI 90 systems
ABB IEMMU22 is a module mounting unit used in the ABB Bailey INFI 90 systems. Use IEMMU22 as the module mounting unit in the ABB Bailey INFI 90 systems. Confirm cabinet standard 483 mm / 19 inch and the exact installed arrangement before connection.
Record the product label, humidity range (0 to 95% noncondensing), cable identification, grounding and adjacent hardware before removing the installed unit. Confirm 24 / 48 v dc, +5 v dc, the exact mechanical position and the approved system configuration before connection.
After installation, verify air quality (Noncorrosive atmosphere), check diagnostics and test the affected function before returning the equipment to service. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: IEMMU22
- Product class: module mounting unit
- Family: ABB Bailey INFI 90 systems
The ABB IEMMU22 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete IEMMU22 identity before exchange
Replace IEMMU22 only after matching the full article identity, module mounting unit, installed -15 v dc and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, -40 to +85 °c, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete one 12-position front rack. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: IEMMU22
- Connection: -40 to +85 °C
- Test: One 12-position front rack
The ABB IEMMU22 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for IEMMU22
- Installation checks matched to ABB Bailey INFI 90 systems
- Exact ABB identity required before service
Documentation for ABB IEMMU22 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IEMMU22
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which cabinet standard must engineering verify for IEMMU22?
For IEMMU22, verify the documented cabinet standard is 483 mm / 19 inch and confirm the remaining nameplate limits before connection. -
How should maintenance document the humidity range before removing IEMMU22?
Photograph the humidity range, which is 0 to 95% noncondensing, plus terminal labels, cable routing, shields and adjacent hardware for IEMMU22. -
What does the module capacity value mean when sourcing IEMMU22?
The exact documented value for IEMMU22 is 12 modules; use it with the full article code when checking the supplied configuration. -
Which primary dc supply limit applies during commissioning of IEMMU22?
Apply 24 / 48 V DC for primary dc supply on IEMMU22; also confirm protection, polarity and the approved startup procedure. -
Can a distributor quote IEMMU22 from a shortened code?
No. Quote the complete identity IEMMU22, manufacturer, quantity, destination, product photos and required documentation scope. -
What receiving inspection is appropriate for the module mounting unit IEMMU22?
Inspect IEMMU22 for the full label, connector condition, revision markings, shipping damage and consistency with ABB Bailey INFI 90 systems. -
Which system record should be retained after replacing IEMMU22?
Retain the incoming inspection, original connection record, configuration backup, measured results and service approval for IEMMU22. -
How is the restored module mounting unit function tested for IEMMU22?
Check status indications, diagnostics and the affected module mounting unit response, then record the final result against IEMMU22.
READY TO VERIFY YOUR PART?
Get a IEMMU22 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
