PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Drives
- 3ABD68444217-D
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3ABD68444217-D IGBT power module
ABB 3ABD68444217-D is a IGBT power module for the ABB industrial control systems. It is used to abb industrial control systems. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete IGBT power module
ACTUAL APPLICATIONS
Application context for 3ABD68444217-D
Manufacturer documentation places the Igbt Power Module in practical drive applications. The three cases below describe different operating tasks in which 3ABD68444217-D performs its documented product-family role with the configured companion equipment.
- 01 · PULP & PAPER
Support reel and winder operation during roll change
In the automation chain for the reels, slitters and winding drums, 3ABD68444217-D serves its documented function as a Igbt Power Module. During roll change, the system uses this function to synchronize winding torque with roll diameter, helping it build a roll with controlled tension. - 02 · MINING & METALS
Control crane motion during positioning approach
As part of the hoists, trolleys and travel drives, 3ABD68444217-D handles its designated signal or control duty as a Igbt Power Module. During positioning approach, the system uses this function to shape acceleration and braking around the commanded move, helping it place the load without excessive swing. - 03 · AUTOMOTIVE
Protect paint-shop conveying with Igbt Power process control
As part of the carrier tracking and booth interfaces, 3ABD68444217-D operates in its approved product-family role as a Igbt Power Module. During carrier accumulation, the system uses this function to route carriers by production status, helping it preserve body order through the process.
Technical specifications for 3ABD68444217-D
-
Product Model3ABD68444217-D
-
Product ParametersIGBT power module
-
In stock1 unit
-
ManufacturerABB
-
Exact Article Code3ABD68444217-D
-
Product FamilyABB Drives
-
Component TypeIgbt Power Module
-
System ClassDCS System
-
Mounting FormatPlug-in control rack
-
System InterfaceManufacturer backplane bus
-
Control Supply24 V DC control class
-
Channel CapacityModel-defined channel set
-
Signal StandardSystem-specific I/O levels
-
Electrical IsolationIsolated field circuits
-
Operating Temperature0 to +55 °C cabinet range
-
Protection LevelIP20 installed equipment
-
Configuration ToolManufacturer engineering software
-
Commissioning TestI/O and diagnostic functional test
View all additional
Alternative Names
3ABD68444217 D
ABB industrial control systems IGBT power module
ABB IGBT power module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3ABD68444217-D to the installed ABB industrial control systems
ABB 3ABD68444217-D is a IGBT power module used in the ABB industrial control systems. Use 3ABD68444217-D in the specified ABB industrial control systems position with the documented supply, signal range and system interface. Match the complete article code and installed rack records before service.
Record terminal numbers, connector keying, rack position, shields and protective earth for 3ABD68444217-D. Preserve the approved ABB configuration and cable routing during exchange. Confirm dcs system, plug-in control rack, the exact mechanical position and the approved system configuration before connection.
After fitting 3ABD68444217-D, check power and module diagnostics, then test the affected I/O, communication, controller or measurement function at a safe operating point and record acceptance. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 3ABD68444217-D
- Product class: IGBT power module
- Family: ABB industrial control systems
The ABB 3ABD68444217-D requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3ABD68444217-D identity before exchange
Replace 3ABD68444217-D only after matching the full article identity, IGBT power module, installed 24 v dc control class and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, system-specific i/o levels, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete i/o and diagnostic functional test. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 3ABD68444217-D
- Connection: System-specific I/O levels
- Test: I/O and diagnostic functional test
The ABB 3ABD68444217-D requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 3ABD68444217-D
- Installation checks matched to ABB industrial control systems
- Exact ABB identity required before service
Documentation for ABB 3ABD68444217-D must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30 × 6.3 cm
-
Shipping weight1.02 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3ABD68444217-D
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What maintenance evidence should remain with 3ABD68444217-D?
Keep receiving inspection, connection records, configuration backup, measured values, diagnostic results and final acceptance for 3ABD68444217-D. -
What receiving inspection applies to 3ABD68444217-D?
Inspect the exact 3ABD68444217-D label, housing, terminals, connectors and packaging; reject damage, contamination or unreadable markings. -
What cabinet conditions should be checked around 3ABD68444217-D?
Check clearance, ventilation, mounting security, cabinet temperature and access around 3ABD68444217-D before energising. -
Which nameplate photographs help source 3ABD68444217-D?
Provide clear photographs of the complete 3ABD68444217-D nameplate, revision markings, connectors and installed rack position. -
How should a distributor quote the complete 3ABD68444217-D identity?
Specify ABB 3ABD68444217-D, quantity, ABB industrial control systems, destination and required PDF scope in the quotation request. -
Which ABB family documentation applies to 3ABD68444217-D?
Use the ABB documentation for ABB industrial control systems and confirm that the exact 3ABD68444217-D code appears in the applicable hardware scope. -
How should technicians confirm the signal range for 3ABD68444217-D?
Compare the connected field circuit with System-specific I/O levels and use calibrated test equipment before applying signals to 3ABD68444217-D. -
Which electrical values must maintenance check on 3ABD68444217-D?
Confirm 24 V DC control class, System-specific I/O levels, Isolated field circuits and protective earth before connecting 3ABD68444217-D.
READY TO VERIFY YOUR PART?
Get a 3ABD68444217-D quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
