PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Drives
- DCS 800
- SDCS-COM-81 3ADT314900R1002
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
SDCS-COM-81 3ADT314900R1002 Optical DDCS Communication Board
ABB SDCS-COM-81 3ADT314900R1002 is an optical DDCS communication board in the DCS800 SDCS-COM-81 DDCS family. It serves compatible installed control equipment in the documented system configuration.
The SDCS-COM-81 board provides four DDCS optical channels. Channel 0 uses 10 Mbaud optical hardware; the other channels serve I/O extension, master/follower and engineering-tool connections. Link media and maximum distances depend on the board revision, and matching optical hardware is required at both ends.
The SDCS-COM-81 board provides four DDCS optical channels. Channel 0 uses 10 Mbaud optical hardware; the other channels serve I/O extension, master/follower and engineering-tool connections. Link media and maximum distances depend on the board revision, and matching optical hardware is required at both ends.
BEFORE YOU BUY
Confirm the complete optical ddcs communication board
ACTUAL APPLICATIONS
Application context for SDCS-COM-81 3ADT314900R1002
SDCS-COM-81 3ADT314900R1002 is an optical DDCS communication board for DCS800 SDCS-COM-81 DDCS. Relevant settings include pulp and paper, metals production, chemical processing. Connections and hardware execution must match the installed equipment.
-
01 · PULP & PAPER
Pulp Processing and Paper Production
Pulp Preparation and ProcessingPaper Production and Converting -
02 · METALS PRODUCTION
Metal Processing and Rolling Production
Steel Rolling Process ControlMetal Forming and Finishing -
03 · CHEMICAL PROCESSING
Chemical Manufacturing and Continuous Process Production
Industrial Chemical Process ControlPetrochemical Processing and Production
Technical specifications for SDCS-COM-81 3ADT314900R1002
-
Product ModelSDCS-COM-81 3ADT314900R1002
-
Spare Model3ADT314900R1002
-
Product ParametersOptical DDCS Communication Board
-
In stock1 unit
-
ManufacturerABB
-
Optical channel count4 transmit/receive channel pairs
-
Channel 0 optical hardware10 Mbaud
-
Channel 2/3 optical hardware10 Mbaud
-
DDCS data transmission4 Mbit/s maximum per channel
-
Channel 1 optical hardware5 Mbaud G–I; 10 Mbaud K and later
-
Green supply indication5 V supply healthy
-
Red status indicationFlashing startup; continuous fault
-
Maximum 10-Mbaud driver current50 mA
View all additional
Alternative Names
SDCS-COM-81 3ADT314900R1002
DCS800 SDCS-COM-81 DDCS Optical DDCS Communication Board
Four-channel fibre-optic DDCS card
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate SDCS-COM-81 3ADT314900R1002 optical ddcs communication board
Match SDCS-COM-81 3ADT314900R1002 to the documented DCS800 SDCS-COM-81 DDCS arrangement. Confirm the supplied execution, connections and required companion equipment before integration.
The SDCS-COM-81 board provides four DDCS optical channels. Channel 0 uses 10 Mbaud optical hardware; the other channels serve I/O extension, master/follower and engineering-tool connections. Link media and maximum distances depend on the board revision, and matching optical hardware is required at both ends.
Use the controlled DCS800 SDCS-COM-81 DDCS drawings and project records for SDCS-COM-81 3ADT314900R1002. Validate the affected circuits, communications and configured functions before returning the equipment to service.
Features:
- Optical channel count: 4 transmit/receive channel pairs
- Channel 0 optical hardware: 10 Mbaud
- Channel 2/3 optical hardware: 10 Mbaud
The SDCS-COM-81 3ADT314900R1002 optical ddcs communication board requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify SDCS-COM-81 3ADT314900R1002 optical ddcs communication board
Compare the complete SDCS-COM-81 3ADT314900R1002 identifier and its installed DCS800 SDCS-COM-81 DDCS role before replacement. Similar housings or matching base numbers do not establish interchangeability.
Record the optical ddcs communication board connections, jumper selections and accepted configuration. Preserve the relevant project backup and isolate the affected circuits under the site procedure.
After fitting the verified SDCS-COM-81 3ADT314900R1002, restore the approved settings and test the affected DCS800 SDCS-COM-81 DDCS functions. Retain the incoming-part identity and acceptance results with the equipment record.
Features:
- Optical channel count: 4 transmit/receive channel pairs
- Channel 0 optical hardware: 10 Mbaud
- Channel 2/3 optical hardware: 10 Mbaud
The SDCS-COM-81 3ADT314900R1002 optical ddcs communication board requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the SDCS-COM-81 3ADT314900R1002 optical ddcs communication board must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size14.6 × 10.3 × 3.5cm
-
Shipping weight0.10kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about SDCS-COM-81 3ADT314900R1002
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Optical channel count for DCS800 SDCS-COM-81 DDCS?
For SDCS-COM-81 3ADT314900R1002, the applicable DCS800 SDCS-COM-81 DDCS documentation specifies 4 transmit/receive channel pairs. This is the documented optical channel count for the identified arrangement. -
Channel 0 optical hardware for DCS800 SDCS-COM-81 DDCS?
For SDCS-COM-81 3ADT314900R1002, the applicable DCS800 SDCS-COM-81 DDCS documentation specifies 10 Mbaud. This is the documented channel 0 optical hardware for the identified arrangement. -
Channel 2/3 optical hardware for DCS800 SDCS-COM-81 DDCS?
For SDCS-COM-81 3ADT314900R1002, the applicable DCS800 SDCS-COM-81 DDCS documentation specifies 10 Mbaud. This is the documented channel 2/3 optical hardware for the identified arrangement. -
DDCS data transmission for DCS800 SDCS-COM-81 DDCS?
For SDCS-COM-81 3ADT314900R1002, the applicable DCS800 SDCS-COM-81 DDCS documentation specifies 4 Mbit/s maximum per channel. This is the documented ddcs data transmission for the identified arrangement. -
What limits COM-81 revision G–I channel-one selection?
SDCS-COM-81 3ADT314900R1002 channel one uses 5-Mbaud optical components at revisions G–I; K and later use 10-Mbaud. Confirm the supplied board revision before connecting the link. -
Green supply indication for DCS800 SDCS-COM-81 DDCS?
For SDCS-COM-81 3ADT314900R1002, the applicable DCS800 SDCS-COM-81 DDCS documentation specifies 5 V supply healthy. This is the documented green supply indication for the identified arrangement. -
Which optical revision is needed for a COM-81 request?
Quote the complete SDCS-COM-81 3ADT314900R1002 code and quantity. Supply its nameplate and connection photos, the installed DCS800 SDCS-COM-81 DDCS configuration and any required companion parts; these distinguish the requested optical ddcs communication board execution. -
Incoming acceptance of the DCS800 SDCS-COM-81 DDCS optical ddcs communication board?
Check the supplied SDCS-COM-81 3ADT314900R1002 identity, physical condition and connector layout against the accepted order and DCS800 SDCS-COM-81 DDCS records. Confirm the documented configuration before replacing the installed component.
READY TO VERIFY YOUR PART?
Get a SDCS-COM-81 3ADT314900R1002 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
