PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
RDCU-02C drive control unit
ABB RDCU-02C is a drive control unit in the ABB ACS800 drives. It is used to control the connected motor or drive function within the configured machine.
Its documented configuration includes product id of 3AXD50000290024, control board of RMIO, supply input of 24 V DC, and control panel connection of X39. During operation, the drive control unit processes the configured drive commands and regulates the connected motor or power section.
Its documented configuration includes product id of 3AXD50000290024, control board of RMIO, supply input of 24 V DC, and control panel connection of X39. During operation, the drive control unit processes the configured drive commands and regulates the connected motor or power section.
BEFORE YOU BUY
Confirm the complete drive control unit
ACTUAL APPLICATIONS
Application context for RDCU-02C
The applications below show typical industry settings, application scenarios, application areas and equipment for RDCU-02C. Confirm the exact ABB ACS800 drives configuration before use.
-
01 · MACHINE BUILDING
Variable-speed machine drive applications
Driven equipmentConveyor and feeder motorsPositioning and indexing axes -
02 · MINING & METALS
Conveyor and mill drive applications
Production equipmentOre conveyors and crushersRolling-mill auxiliary motors -
03 · WATER & WASTEWATER
Pump and blower drive applications
Utility equipmentRaw-water intake pumpsAeration blowers and dosing pumps
Technical specifications for RDCU-02C
-
Product ModelRDCU-02C
-
Product ParametersDrive control unit
-
In stock1 unit
-
ManufacturerABB
-
Product ID3AXD50000290024
-
Control BoardRMIO
-
Supply Input24 V DC
-
Control Panel ConnectionX39
-
I/O Expansion SlotsSlots 1 and 2
-
DDCS Option SlotSlot 3 for RDCO
-
Inverter LinkFiber-optic connection
-
Mounting OrientationVertical cabinet mounting
-
Application FrameACS800 R8i inverter units
-
Product FunctionDrive control unit
View all additional
Alternative Names
RDCU-02C
RDCU 02C
ABB ACS800 drives drive control unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match RDCU-02C to the installed ABB ACS800 drives
ABB RDCU-02C is a drive control unit for the ABB ACS800 drives. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare control panel connection (X39), i/o expansion slots (Slots 1 and 2) and ddcs option slot (Slot 3 for RDCO) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: RDCU-02C
- Product class: drive control unit
- Family: ABB ACS800 drives
The ABB RDCU-02C requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete RDCU-02C identity before exchange
Replace RDCU-02C only after matching the complete article code, drive control unit, installed ABB ACS800 drives role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: RDCU-02C
- Product class: drive control unit
- Family check: ABB ACS800 drives
The ABB RDCU-02C requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for RDCU-02C
- Product family: ABB ACS800 drives
- Exact ABB identity required before service
Documentation for ABB RDCU-02C must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30.0 x 22.0 x 8.0 cm
-
Shipping weight0.60 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504409999
-
OriginFinland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about RDCU-02C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which product id confirms the correct RDCU-02C?
Match the complete RDCU-02C label and verify product id is 3AXD50000290024 before accepting the drive control unit. -
What must engineering check around control board?
For RDCU-02C, compare control board (RMIO) with the installed wiring, host hardware and controlled project. -
Can another ABB ACS800 drives article replace this unit?
Do not select a substitute from appearance alone. Compare RDCU-02C, product id, control board, connectors, firmware and the saved configuration. -
Which records protect the existing supply input setup?
Before removing RDCU-02C, photograph labels and connections, then save configuration evidence associated with supply input (24 V DC). -
How should the drive control unit be inspected on arrival?
Inspect RDCU-02C for the exact article marking, connector damage, bent hardware, missing accessories and transport damage before disturbing the installed spare. -
Which functional test follows the RDCU-02C exchange?
Restore the approved setup, review diagnostics and test the affected ABB ACS800 drives signal, network, control or drive path at a safe operating point. -
What data should a distributor quote for this configuration?
Provide RDCU-02C, quantity, nameplate photographs, installed ABB ACS800 drives system, required interfaces and destination country. -
How can MRO avoid receiving the wrong hardware revision?
Ask the supplier to confirm the full RDCU-02C identity, visible revision, product id and connector layout against photographs before shipment.
READY TO VERIFY YOUR PART?
Get a RDCU-02C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
