PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Drives
- SDCS-CON-H01 3ADT320000R1501
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
SDCS-CON-H01 3ADT320000R1501 DC Drive Control Board
ABB SDCS-CON-H01 3ADT320000R1501 is a control board for the DCS880 DC drive family. It provides the drive control circuit connections used for analog signals, digital signals, feedback and communication within a compatible DCS880 converter.
The board is carried on an electronic tray and provides three analog inputs, two analog outputs and relay connections. Selectable input arrangements support voltage or current signals, while the internal watchdog supervises board and firmware operation and disables thyristor firing if it trips. Terminal allocation and jumper settings must follow the installed drive configuration.
The board is carried on an electronic tray and provides three analog inputs, two analog outputs and relay connections. Selectable input arrangements support voltage or current signals, while the internal watchdog supervises board and firmware operation and disables thyristor firing if it trips. Terminal allocation and jumper settings must follow the installed drive configuration.
BEFORE YOU BUY
Confirm the complete dc drive control board
ACTUAL APPLICATIONS
Application context for SDCS-CON-H01 3ADT320000R1501
SDCS-CON-H01 3ADT320000R1501 forms part of a compatible DCS880 DC drive. The drive family serves metals, paper production and plastics processing. The board provides the control interfaces; process functions and motor ratings depend on the complete converter and its commissioned configuration.
-
01 · METALS
Metal Manufacturing and Material Processing
Steel Production and RollingMetal Drawing and Surface Processing -
02 · PULP & PAPER
Pulp Preparation and Paper Manufacturing
Pulp and Fibre ProcessingPaper and Board Manufacturing -
03 · PLASTICS & RUBBER
Plastics Production and Rubber Processing
Plastic Extrusion and Film ProductionRubber Mixing and Material Processing
Technical specifications for SDCS-CON-H01 3ADT320000R1501
-
Product ModelSDCS-CON-H01 3ADT320000R1501
-
Product ParametersDC Drive Control Board
-
In stock1 unit
-
ManufacturerABB
-
Analog input channels3
-
Analog input voltage range±10 V
-
AI1/AI2 current range0(4)–20 mA or ±20 mA
-
Analog input resolution15 bits + sign
-
Voltage input impedance≥200 kΩ
-
Current input impedance100 Ω
-
Analog input common mode±30 V
-
Analog input sampling0.25 ms per channel
-
Analog output channels2
-
Analog output voltage±10 V; ≤10 mA
-
AO1 current output load≤500 Ω at 0(4)–20 mA
-
Analog output bandwidth0–300 Hz
-
Analog output resolution11 bits + sign
-
Relay output rating250 V AC / 30 V DC; 2 A
-
Terminal conductor range0.5–2.5 mm²
View all additional
Alternative Names
SDCS-CON-H01 3ADT320000R1501
DCS880 DC Drive Control Board
DCS880 3 analog input channels
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate SDCS-CON-H01 3ADT320000R1501 dc drive control board
Integrate SDCS-CON-H01 3ADT320000R1501 only in a DCS880 configuration that specifies this control board. The hardware manual identifies common control terminals for frame sizes H1 through H8.
Compare the analog input selection, output loading, relay circuits and feedback connections with the approved drive drawings. Analog inputs have 15-bit plus sign resolution, and voltage and current inputs use different impedances.
Follow the documented tray access and terminal connection procedure. Restore the parameter set, check the watchdog and diagnostics, and test the affected feedback and control signals before releasing the drive.
Features:
- Analog input channels: 3
- Analog input voltage range: ±10 V
- AI1/AI2 current range: 0(4)–20 mA or ±20 mA
The SDCS-CON-H01 3ADT320000R1501 dc drive control board requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify SDCS-CON-H01 3ADT320000R1501 dc drive control board
Verify SDCS-CON-H01 and 3ADT320000R1501 together with the installed DCS880 hardware and firmware revision. Do not select a board solely because its connector arrangement appears similar.
Record all terminal numbers, jumpers, feedback cables and parameter backups before opening the electronic tray. Keep field wiring and shielding identified throughout the replacement.
After fitting the specified board, compare the restored drive parameters and signal scaling. Confirm feedback polarity, relay behaviour and watchdog status through the approved converter acceptance test.
Features:
- Analog input channels: 3
- Analog input voltage range: ±10 V
- AI1/AI2 current range: 0(4)–20 mA or ±20 mA
The SDCS-CON-H01 3ADT320000R1501 dc drive control board requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the SDCS-CON-H01 3ADT320000R1501 dc drive control board must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size31.5 × 26 × 6cm
-
Shipping weight2.10kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about SDCS-CON-H01 3ADT320000R1501
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How many analog inputs are provided on SDCS-CON-H01?
SDCS-CON-H01 provides three analog inputs. AI1 and AI2 can use voltage or current arrangements; AI3 is a voltage input. -
Why does the input jumper position matter?
The board uses at least 200 kΩ for voltage inputs and 100 Ω for current inputs. Jumper selection and wiring must agree with the actual signal source. -
What analog conversion resolution does the control board use?
The DCS880 hardware manual specifies 15 bits plus sign for analog inputs and 11 bits plus sign for analog outputs. -
What load can AO1 drive in current mode?
AO1 supports 0(4)–20 mA into a load of at most 500 Ω. Confirm the selected output arrangement before connection. -
What happens when the internal watchdog trips?
On SDCS-CON-H01, the watchdog resets and disables thyristor firing, stops digital-input processing, freezes digital outputs and stops analog-input processing. -
Which wiring sizes fit the control terminals?
The control terminals accept conductors from 0.5 to 2.5 mm². The hardware manual specifies 0.5 Nm terminal tightening torque. -
Which board codes should appear on the purchase request?
Specify both SDCS-CON-H01 and 3ADT320000R1501, plus the DCS880 drive identity and existing hardware revision, so the offered control board can be compared correctly. -
How should the received control board be inspected?
For this SDCS-CON-H01 assembly, compare terminal legends, jumper positions, tray fittings and the full article label before connecting any field wiring.
READY TO VERIFY YOUR PART?
Get a SDCS-CON-H01 3ADT320000R1501 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
