PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Drives
- SDCS-PIN-51 3ADT220090R0006
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
SDCS-PIN-51 3ADT220090R0006 current and voltage measuring board
ABB SDCS-PIN-51 3ADT220090R0006 is a current and voltage measuring board in the ABB DCS800 DC drives. The article-specific data identifies its control role, communication or signal interface and installed system compatibility. Confirm the complete nameplate, electrical class, revision, companion equipment and controlled configuration before ordering.
BEFORE YOU BUY
Confirm the complete current and voltage measuring board
ACTUAL APPLICATIONS
Application context for SDCS-PIN-51 3ADT220090R0006
Manufacturer documentation places the current and volta measuring board in practical ABB DCS800 DC drives applications. The three cases below describe different operating tasks in which SDCS-PIN-51 3ADT220090R0006 performs its documented product-family role with the configured companion equipment.
-
01 · MINING & METALS
Measure armature conditions in a rolling-mill DC drive
SDCS-PIN-51 acquires current, AC-side voltage, DC-side voltage and power-section temperature signals for a high-current DCS800 converter. These measurements support torque regulation and protection during mill speed changes. -
02 · PULP & PAPER
Supervise a sectional paper-machine DC drive
SDCS-PIN-51 transfers power-section measurements to the DCS800 control electronics as the section follows coordinated line-speed commands. Temperature and electrical feedback support stable web tension across changing production loads. -
03 · MATERIAL HANDLING
Monitor a crane hoist converter power section
SDCS-PIN-51 provides the DCS800 with current, voltage and temperature feedback during hoisting and regenerative lowering. The controller uses those measured values for closed-loop response and converter protection.
Technical specifications for SDCS-PIN-51 3ADT220090R0006
-
Product ModelSDCS-PIN-51 3ADT220090R0006
-
Product Parameterscurrent and voltage measuring board
-
In stock1 unit
-
ManufacturerABB
-
Exact Article Code3ADT220090R0006
-
Board DesignationSDCS-PIN-51
-
Drive FamilyDCS800
-
Companion BoardSDCS-PIN-41
-
Primary FunctionCurrent, voltage and temperature measurement
-
Hardware CodingPower-unit hardware identification
-
Current Transformer Ratio2500:1 or 4000:1
-
Armature Current Range900 to 5150 A
-
AC Voltage InputsU1, V1 and W1
-
DC Voltage InputsC1+ and D1−
-
Temperature InputPower-section temperature feedback
-
Power-Part InterfaceDCS800 converter power section
-
Measurement PotentialLine-potential measurement circuits
-
Signal TransferMeasured values to drive control electronics
-
Board VariantCoated measuring board
View all additional
Alternative Names
SDCS PIN 51 3ADT220090R0006
ABB current and voltage measuring board
ABB DCS800 DC drives current and voltage measuring board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match SDCS-PIN-51 3ADT220090R0006 to the installed ABB DCS800 DC drives
ABB SDCS-PIN-51 3ADT220090R0006 is a current and voltage measuring board for the ABB DCS800 DC drives. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare companion board (SDCS-PIN-41), primary function (Current, voltage and temperature measurement) and hardware coding (Power-unit hardware identification) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: SDCS-PIN-51 3ADT220090R0006
- Product class: current and voltage measuring board
- Family: ABB DCS800 DC drives
The ABB SDCS-PIN-51 3ADT220090R0006 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete SDCS-PIN-51 3ADT220090R0006 identity before exchange
Replace SDCS-PIN-51 3ADT220090R0006 only after matching the complete article code, current and voltage measuring board, installed ABB DCS800 DC drives role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: SDCS-PIN-51 3ADT220090R0006
- Product class: current and voltage measuring board
- Family check: ABB DCS800 DC drives
The ABB SDCS-PIN-51 3ADT220090R0006 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical data prepared for SDCS-PIN-51 3ADT220090R0006
- Product family: ABB DCS800 DC drives
- Exact ABB identity required before service
Documentation for ABB SDCS-PIN-51 3ADT220090R0006 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30.5 × 10.0 × 1.4 cm
-
Shipping weight0.15 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about SDCS-PIN-51 3ADT220090R0006
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which incoming-inspection checks apply to SDCS-PIN-51 3ADT220090R0006?
Inspect the SDCS-PIN-51 3ADT220090R0006 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same ABB DCS800 DC drives family directly replace SDCS-PIN-51 3ADT220090R0006?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing SDCS-PIN-51 3ADT220090R0006?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting SDCS-PIN-51 3ADT220090R0006. -
Which configuration data should be backed up before exchanging SDCS-PIN-51 3ADT220090R0006?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission SDCS-PIN-51 3ADT220090R0006 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected current and voltage measuring board function at a safe operating point. -
What service evidence should be retained after work on SDCS-PIN-51 3ADT220090R0006?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for SDCS-PIN-51 3ADT220090R0006. -
Which nameplate details identify the correct SDCS-PIN-51 3ADT220090R0006 for a distributor quotation?
Quote SDCS-PIN-51 3ADT220090R0006 with the complete suffix, current and voltage measuring board, ABB DCS800 DC drives, quantity and clear nameplate photographs. -
What should engineering compare before integrating SDCS-PIN-51 3ADT220090R0006 into the installed system?
Compare the documented ABB DCS800 DC drives role, supply class, communication or signal interface, firmware or hardware revision and companion equipment.
READY TO VERIFY YOUR PART?
Get a SDCS-PIN-51 3ADT220090R0006 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
