PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Robots
- 3HAC034647-003
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IRB 4600 Type A axis-3 motor with pinion
ABB 3HAC034647-003 is a motor with pinion identified for axis 3 of the IRB 4600 Type A robot. The manufacturer's Product Details sheet specifies applicability from robot serial number 46-64000 and gives the type designation as Type A 2238W / 4.5Nm.
The same ABB record requires RobotWare 5.12.02 or later and a keystring. Selection therefore involves more than matching the motor's appearance: confirm the complete order number, robot type, serial range and controller software requirements before replacement, using the applicable ABB installation and service documentation.
The same ABB record requires RobotWare 5.12.02 or later and a keystring. Selection therefore involves more than matching the motor's appearance: confirm the complete order number, robot type, serial range and controller software requirements before replacement, using the applicable ABB installation and service documentation.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
IRB 4600 production-cell service contexts
ABB documents these uses of the IRB 4600 family. The listed motor supports a matching Type A axis-3 assembly; these series examples do not prove that this exact order number was installed in a particular customer project.
-
01 · ROBOTIC WELDING
Servicing axis motion in arc-welding cells
ABB's FlexArc material identifies IRB 4600 robots for welding stations. Where the installed Type A robot specifies this motor, correct axis-3 replacement supports the robot motion used to position the welding equipment. -
02 · WOOD PACKAGING
Maintenance in packaging and labelling cells
An ABB case describes IRB 4600 robots in an end-of-line wood packaging and labelling cell. Apply this motor reference only after matching the robot type and serial range, not solely because the cell uses IRB 4600 robots. -
03 · MACHINE TENDING
Maintaining robot handling motion
ABB lists machine tending among IRB 4600 applications. For a qualifying Type A installation, motor selection must retain the specified axis assignment and software conditions used by the robot's handling motions.
Technical specifications for 3HAC034647-003
-
Product Model3HAC034647-003
-
Product ParametersRobot motor with pinion
-
In stock1 unit
-
ManufacturerABB
-
Robot familyIRB 4600
-
Robot variantType A
-
Axis assignmentAxis 3
-
Applicable robot serial rangeFrom 46-64000, as stated by ABB
-
Required RobotWare version5.12.02 or later
-
Additional software requirementKeystring required by ABB technical information
-
Power in ABB type designation2238 W
-
Torque in ABB type designation4.5 Nm
View all additional
Alternative Names
IRB 4600 Type A axis-3 motor
ABB 3HAC034647-003 motor assembly
3HAC034647-003 motor and pinion
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
IRB 4600 TYPE A MOTOR
Check axis, robot serial number and software together
ABB identifies 3HAC034647-003 for axis 3 of the IRB 4600 Type A robot, from serial number 46-64000. These conditions must be checked together rather than using the family name as blanket compatibility evidence.
The product record requires RobotWare 5.12.02 or later and a keystring. Software applicability must be confirmed alongside the physical motor and pinion assembly before return to service.
Use the installed robot's controlled circuit diagrams and service instructions for electrical connection, mechanical installation and verification. The Product Details record does not replace a complete motor-replacement procedure.
Features:
- Confirm Type A and the stated serial range
- Verify axis-3 motor identity
- Check RobotWare version and keystring
The ABB 3HAC034647-003 motor requires robot and software checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match 3HAC034647-003 to the installed axis-3 motor, Type A robot and applicable serial range. A similar assembly or a different order-number suffix does not establish an approved substitute.
ABB states a RobotWare minimum version and keystring requirement. Confirm whether the existing controller meets these conditions before describing the replacement as ready to install; do not assume the spare includes software or licensing.
No exact discontinuation date or unconditional later successor was confirmed in the reviewed material. Replacement planning should follow the complete ABB robot identification and current service documentation.
Features:
- Retain the complete motor order number
- Verify the robot and controller software conditions
- Do not assume a drop-in successor
The ABB 3HAC034647-003 motor with pinion requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon is an independent supplier. Refer to the applicable ABB documentation and the installed equipment configuration before selection, installation or replacement.
Features:
- Exact-model reference documents
- Model and controller identity checks
- Accessories are supplied only when listed in the quotation
Documentation for the ABB 3HAC034647-003 supports document applicability checks before installation or replacement.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weight11.2 kg (ABB gross weight)
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85015220 (ABB tariff reference)
-
OriginChina (ABB Product Details)
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3HAC034647-003
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which robot axis is 3HAC034647-003 intended for?
ABB's technical information explicitly identifies axis 3 of the IRB 4600 Type A robot. Do not infer another axis assignment from a similar motor appearance. -
What robot serial-number restriction does ABB state?
The Product Details record specifies robot Type A from serial number 46-64000. Verify the installed robot's identification against that restriction before selecting the part. -
Which RobotWare version is required?
ABB states RobotWare 5.12.02 or later and a keystring. Verify the required software and keystring for the installed configuration; the physical spare alone does not establish software readiness. -
Does the catalog description include the pinion?
Yes. ABB calls 3HAC034647-003 Motor with pinion. Other accessories or service items should not be assumed included unless identified in the quotation. -
Can this motor be used in every IRB 4600?
No universal compatibility is established. ABB specifies Type A, axis 3 and a serial-number range, with software requirements. Other variants require their own approved parts identification. -
Are 2238 W and 4.5 Nm verified product markings?
These values appear in ABB's type designation, Type A 2238W / 4.5Nm. They are reproduced with that context, rather than being expanded into unsupported operating limits or performance guarantees. -
What gross weight does ABB list?
The reviewed ABB record explicitly lists Gross Weight as 11.2 kg. The listed product net dimensions are not treated as packaged dimensions.
READY TO VERIFY YOUR PART?
Get a 3HAC034647-003 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
