PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Robots
- 3HAC047577-002
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3HAC047577-002 type d wrist axis spare
ABB 3HAC047577-002 is a type d wrist axis spare in the ABB Robots. It is used to perform the documented type d wrist axis spare function in the installed automation equipment.
Its documented configuration includes robot family of IRB 4600, documented axis positions of Axes 4, 5 and 6, documented robot variant of IRB 4600-20/2.55, and compatibility rule of Replace only with the same motor type. During operation, the type d wrist axis spare performs its assigned type d wrist axis spare function through the documented power, signal and communication interfaces.
Its documented configuration includes robot family of IRB 4600, documented axis positions of Axes 4, 5 and 6, documented robot variant of IRB 4600-20/2.55, and compatibility rule of Replace only with the same motor type. During operation, the type d wrist axis spare performs its assigned type d wrist axis spare function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete type d wrist axis spare
ACTUAL APPLICATIONS
Where 3HAC047577-002 Fits Across Major Industry Sectors
Uses span metalworking, automotive and pharmaceuticals, subject to verified compatibility, operating conditions and project requirements.
-
01 · METAL FABRICATION
Commercial Metal Fabrication and Industrial Foundry Production
Metal fabrication and welded product manufacturing for industrial markets.Foundry casting and finishing for commercial metal product manufacturing. -
02 · AUTOMOTIVE MANUFACTURING
Automotive Metal Stamping and Commercial Vehicle Assembly
Automotive metal stamping for vehicle body and manufacturing production.Final vehicle assembly and production for commercial automobile markets. -
03 · PHARMACEUTICAL MANUFACTURING
Commercial Pharmaceutical Production and Industrial Biotechnology Manufacturing
Pharmaceutical production and formulation for medicine and healthcare markets.Biotechnology manufacturing and processing for commercial life science production.
Technical specifications for 3HAC047577-002
-
Product Model3HAC047577-002
-
Product Parameterstype d wrist axis spare
-
In stock1 unit
-
ManufacturerABB
-
Robot FamilyIRB 4600
-
Component TypeType D spare motor
-
Documented Axis PositionsAxes 4, 5 and 6
-
Documented Robot VariantIRB 4600-20/2.55
-
Compatibility RuleReplace only with the same motor type
-
Foundry Prime ApplicabilityNot applicable
-
Exact Article Code3HAC047577-002
-
Product FamilyABB Robots
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Robots control interface
-
Control SupplyDocumented rack control supply
-
Connector InterfaceKeyed ABB board connectors
-
Installation FormatPlug-in control board
-
Signal DomainControl and diagnostic signals
-
Service PositionDocumented rack slot
View all additional
Alternative Names
3HAC047577 002
ABB type d wrist axis spare
ABB Robots type d wrist axis spare
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3HAC047577-002 to the installed ABB Robots
ABB 3HAC047577-002 is a type d wrist axis spare for the ABB Robots. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare documented robot variant (IRB 4600-20/2.55), compatibility rule (Replace only with the same motor type) and foundry prime applicability (Not applicable) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3HAC047577-002
- Product class: type d wrist axis spare
- Family: ABB Robots
The ABB 3HAC047577-002 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3HAC047577-002 identity before exchange
Replace 3HAC047577-002 only after matching the complete article code, type d wrist axis spare, installed ABB Robots role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3HAC047577-002
- Product class: type d wrist axis spare
- Family check: ABB Robots
The ABB 3HAC047577-002 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 3HAC047577-002
- Product family: ABB Robots
- Exact ABB identity required before service
Documentation for ABB 3HAC047577-002 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 22 × 10 cm
-
Shipping weight7.68 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3HAC047577-002
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which configuration records should be backed up before replacing 3HAC047577-002?
Back up the hardware list, parameter set, controller project or converter configuration that identifies 3HAC047577-002. -
What records should remain with 3HAC047577-002 after service?
Keep receiving inspection, configuration backup, connection record, measured results and final acceptance with the 3HAC047577-002 service file. -
What receiving inspection is required for 3HAC047577-002?
Inspect the 3HAC047577-002 label, housing, terminals, connectors and packaging; record any damage or unreadable identification. -
What cabinet conditions should be checked for 3HAC047577-002?
Check secure mounting, ventilation, contamination, clearance and access around 3HAC047577-002 before service. -
Which photographs help a distributor source 3HAC047577-002?
Provide clear photos of the complete 3HAC047577-002 label, revision marks, connectors and installed equipment position. -
How should a distributor quote the exact 3HAC047577-002 assembly?
Quote ABB 3HAC047577-002, quantity, product family, visible revision marks and the destination equipment in the request. -
Which ABB system documents apply to 3HAC047577-002?
Use ABB documentation for ABB Robots and confirm that the exact 3HAC047577-002 assembly is covered by the hardware scope. -
How should the signal or power interface for 3HAC047577-002 be verified?
Compare every connected circuit with the controlled drawing and verify the approved electrical class before connecting 3HAC047577-002.
READY TO VERIFY YOUR PART?
Get a 3HAC047577-002 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
