PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Robots
- 3HAC057980-006
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3HAC057980-006 six-axis motor
ABB 3HAC057980-006 is a six-axis motor in the ABB Robots. It is used to convert electrical energy into the documented mechanical drive function.
Its documented configuration includes rated power of 7 kW, rated speed of 3000 RPM (Variable Speed), rated voltage of 400 V (3-phase AC), and rated current of 14 A. During operation, the six-axis motor performs its assigned six-axis motor function through the documented power, signal and communication interfaces.
Its documented configuration includes rated power of 7 kW, rated speed of 3000 RPM (Variable Speed), rated voltage of 400 V (3-phase AC), and rated current of 14 A. During operation, the six-axis motor performs its assigned six-axis motor function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete six-axis motor
ACTUAL APPLICATIONS
Application context for 3HAC057980-006
Manufacturer documentation places the six-axis motor in practical generic applications. The three cases below describe different operating tasks in which 3HAC057980-006 performs its documented product-family role with the configured companion equipment.
-
01 · MACHINERY MANUFACTURING
Sequence test-stand control with Six Axis process control
Inside the load actuators and measurement channels, 3HAC057980-006 handles its designated signal or control duty as a six-axis motor. During test-point transition, the system uses this function to move the test article through commanded operating points, helping it capture comparable results at each condition. -
02 · AUTOMOTIVE
Maintain robotic joining with Six Axis process control
Within the robots, fixtures and clamp groups, 3HAC057980-006 performs its assigned control role as a six-axis motor. During station restart, the system uses this function to confirm tooling readiness before the cycle starts, helping it prevent an incomplete joining cycle. -
03 · FOOD & BEVERAGE
Maintain recipe mixing with Six Axis process control
Within the mixers and ingredient skids, 3HAC057980-006 handles its designated signal or control duty as a six-axis motor. During recipe changeover, the system uses this function to sequence material transfers and equipment permissives, helping it preserve the verified batch state.
Technical specifications for 3HAC057980-006
-
Product Model3HAC057980-006
-
Product Parameterssix-axis motor
-
In stock1 unit
-
ManufacturerABB
-
Rated Power7 kW
-
Rated Speed3000 RPM (Variable Speed)
-
Rated Voltage400 V (3-phase AC)
-
Rated Current14 A
-
Rated Frequency50 Hz
-
Torque Constant20 Nm/A
-
Service Factor1.5
-
Exact Article Code3HAC057980-006
-
Product FamilyABB Robots
-
Component TypeSix-Axis Motor
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Robots control interface
-
Control SupplyDocumented rack control supply
-
Connector InterfaceKeyed ABB board connectors
-
Installation FormatPlug-in control board
View all additional
Alternative Names
3HAC057980 006
ABB six-axis motor
ABB Robots six-axis motor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3HAC057980-006 to the installed ABB Robots
ABB 3HAC057980-006 is a six-axis motor for the ABB Robots. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare rated current (14 A), rated frequency (50 Hz) and torque constant (20 Nm/A) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3HAC057980-006
- Product class: six-axis motor
- Family: ABB Robots
The ABB 3HAC057980-006 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3HAC057980-006 identity before exchange
Replace 3HAC057980-006 only after matching the complete article code, six-axis motor, installed ABB Robots role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3HAC057980-006
- Product class: six-axis motor
- Family check: ABB Robots
The ABB 3HAC057980-006 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 3HAC057980-006
- Product family: ABB Robots
- Exact ABB identity required before service
Documentation for ABB 3HAC057980-006 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 22 × 10 cm
-
Shipping weight1.55 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3HAC057980-006
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should the signal or power interface for 3HAC057980-006 be verified?
Compare every connected circuit with the controlled drawing and verify the approved electrical class before connecting 3HAC057980-006. -
Which electrical checks apply before energising 3HAC057980-006?
Confirm the documented supply, interface, insulation condition and protective earth before energising 3HAC057980-006. -
What commissioning evidence is needed after fitting 3HAC057980-006?
Record power-up status, diagnostics, the affected function test and final maintenance approval for 3HAC057980-006. -
Which companion hardware must match 3HAC057980-006?
Verify the documented rack, control unit, power stage, connector assembly and adjacent hardware paired with 3HAC057980-006. -
What drawings should engineering review before installing 3HAC057980-006?
Review the installed hardware list, cabinet drawing, connection diagram and controlled ABB Robots service documentation for 3HAC057980-006. -
How is interchangeability assessed for 3HAC057980-006?
Physical similarity is insufficient; 3HAC057980-006 must match the complete article identity, interface and approved system configuration. -
What diagnostics should maintenance review for 3HAC057980-006?
Review power, communication, gate, I/O or controller status relevant to 3HAC057980-006, then record resolved alarms. -
Which nameplate fields identify 3HAC057980-006 for a maintenance replacement?
Match the complete ABB article code 3HAC057980-006, its board or device designation, product family and installed position.
READY TO VERIFY YOUR PART?
Get a 3HAC057980-006 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
