PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Robots
- 3HAC063061-001
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3HAC063061-001 main computer assembly
ABB 3HAC063061-001 is a main computer assembly in the ABB Robots. It is used to perform the documented main computer assembly function in the installed automation equipment.
Its documented configuration includes operating temp of 0°C to +55°C, humidity of 5-95% RH (non-condensing), ram of 4GB DDR3, and storage of 32GB SSD. During operation, the main computer assembly performs its assigned main computer assembly function through the documented power, signal and communication interfaces.
Its documented configuration includes operating temp of 0°C to +55°C, humidity of 5-95% RH (non-condensing), ram of 4GB DDR3, and storage of 32GB SSD. During operation, the main computer assembly performs its assigned main computer assembly function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete main computer assembly
ACTUAL APPLICATIONS
Application context for 3HAC063061-001
Manufacturer documentation places the main computer assembly in practical generic applications. The three cases below describe different operating tasks in which 3HAC063061-001 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Monitor aeration control with Main Computer process control
For the coordinated operation of the blowers and dissolved-oxygen loops, 3HAC063061-001 performs its assigned control role as a main computer assembly. During changing oxygen demand, the system uses this function to adjust air delivery from process feedback, helping it stabilize treatment performance. -
02 · GENERAL MANUFACTURING
Sequence pallet transfer with Main Computer process control
Inside the turntables, lifts and shuttle cars, 3HAC063061-001 performs its assigned control role as a main computer assembly. During blocked-zone recovery, the system uses this function to re-establish the transfer path after the obstruction clears, helping it resume flow without losing tracking data. -
03 · FOOD & BEVERAGE
Coordinate clean-in-place transfer with Main Computer
During operation of the CIP supply and return headers, 3HAC063061-001 handles its designated signal or control duty as a main computer assembly. During sanitation transition, the system uses this function to coordinate valve paths and pump availability, helping it complete sanitation without cross-routing product.
Technical specifications for 3HAC063061-001
-
Product Model3HAC063061-001
-
Product Parametersmain computer assembly
-
In stock1 unit
-
ManufacturerABB
-
Operating Temp0°C to +55°C
-
Humidity5-95% RH (non-condensing)
-
RAM4GB DDR3
-
Storage32GB SSD
-
Input Voltage24V DC (±10%)
-
Power Consumption50W (typical)
-
Ethernet10/100/1000 Mbps
-
Exact Article Code3HAC063061-001
-
Product FamilyABB Robots
-
Component TypeMain Computer Assembly
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Robots control interface
-
Control SupplyDocumented rack control supply
-
Connector InterfaceKeyed ABB board connectors
-
Installation FormatPlug-in control board
View all additional
Alternative Names
3HAC063061 001
ABB main computer assembly
ABB Robots main computer assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3HAC063061-001 to the installed ABB Robots
ABB 3HAC063061-001 is a main computer assembly for the ABB Robots. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare storage (32GB SSD), input voltage (24V DC (±10%)) and power consumption (50W (typical)) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3HAC063061-001
- Product class: main computer assembly
- Family: ABB Robots
The ABB 3HAC063061-001 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3HAC063061-001 identity before exchange
Replace 3HAC063061-001 only after matching the complete article code, main computer assembly, installed ABB Robots role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3HAC063061-001
- Product class: main computer assembly
- Family check: ABB Robots
The ABB 3HAC063061-001 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 3HAC063061-001
- Product family: ABB Robots
- Exact ABB identity required before service
Documentation for ABB 3HAC063061-001 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 22 × 10 cm
-
Shipping weight2.50 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3HAC063061-001
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which connections must be recorded before removing 3HAC063061-001?
Photograph connector keying, terminal references, cable destinations, shields, earth points and neighboring assemblies used by 3HAC063061-001. -
Which configuration records should be backed up before replacing 3HAC063061-001?
Back up the hardware list, parameter set, controller project or converter configuration that identifies 3HAC063061-001. -
What records should remain with 3HAC063061-001 after service?
Keep receiving inspection, configuration backup, connection record, measured results and final acceptance with the 3HAC063061-001 service file. -
What receiving inspection is required for 3HAC063061-001?
Inspect the 3HAC063061-001 label, housing, terminals, connectors and packaging; record any damage or unreadable identification. -
What cabinet conditions should be checked for 3HAC063061-001?
Check secure mounting, ventilation, contamination, clearance and access around 3HAC063061-001 before service. -
Which photographs help a distributor source 3HAC063061-001?
Provide clear photos of the complete 3HAC063061-001 label, revision marks, connectors and installed equipment position. -
How should a distributor quote the exact 3HAC063061-001 assembly?
Quote ABB 3HAC063061-001, quantity, product family, visible revision marks and the destination equipment in the request. -
Which ABB system documents apply to 3HAC063061-001?
Use ABB documentation for ABB Robots and confirm that the exact 3HAC063061-001 assembly is covered by the hardware scope.
READY TO VERIFY YOUR PART?
Get a 3HAC063061-001 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
