PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Robots
- 3HAC17335-1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3HAC17335-1 industrial control board
ABB 3HAC17335-1 industrial control board for ABB Robots equipment. It performs the designated control, signal-processing or communication function inside the associated ABB system. In operation, it exchanges electrical signals and status data with the connected controller, I/O or drive hardware.
BEFORE YOU BUY
Confirm the complete industrial control board
ACTUAL APPLICATIONS
Application context for 3HAC17335-1
Manufacturer documentation places the industrial control board in practical generic applications. The three cases below describe different operating tasks in which 3HAC17335-1 performs its documented product-family role with the configured companion equipment.
-
01 · MACHINERY MANUFACTURING
Regulate machine-tool automation with Industrial Control
Inside the spindles, axes and tool changers, 3HAC17335-1 handles its designated signal or control duty as a industrial control board. During cycle start, the system uses this function to coordinate the equipment states required by the active cycle, helping it complete the machining step with traceable status. -
02 · AUTOMOTIVE
Stabilize powertrain assembly with Industrial Control
At the control layer of the machining cells and pallet systems, 3HAC17335-1 handles its designated signal or control duty as a industrial control board. During quality-hold release, the system uses this function to hand off part identity with the machine sequence, helping it retain traceability at the next operation. -
03 · POWER GENERATION
Regulate turbine auxiliary control with Industrial Control
As part of the lube-oil pumps and turning gear, 3HAC17335-1 supports the configured automation role as a industrial control board. During unit run-up, the system uses this function to coordinate permissives and auxiliary equipment states, helping it support a stable transition to rated operation.
Technical specifications for 3HAC17335-1
-
Product Model3HAC17335-1
-
Product Parametersindustrial control board
-
In stock1 unit
-
ManufacturerABB
-
Exact Article Code3HAC17335-1
-
Product FamilyABB Robots
-
Component TypeIndustrial Control Board
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Robots control interface
-
Control SupplyDocumented rack control supply
-
Connector InterfaceKeyed ABB board connectors
-
Installation FormatPlug-in control board
-
Signal DomainControl and diagnostic signals
-
Service PositionDocumented rack slot
-
Configuration BasisInstalled ABB hardware list
-
Replacement BasisExact article and board revision
-
Protective CheckESD and protective-earth control
-
Commissioning CheckPower-up diagnostics and function test
-
Maintenance Identity3HAC17335-1 controlled service identity
View all additional
Alternative Names
3HAC17335 1
ABB industrial control board
ABB Robots industrial control board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3HAC17335-1 to the installed ABB Robots
ABB 3HAC17335-1 is a industrial control board for the ABB Robots. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare assembly class (ABB PCB assembly), system interface (ABB Robots control interface) and control supply (Documented rack control supply) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3HAC17335-1
- Product class: industrial control board
- Family: ABB Robots
The ABB 3HAC17335-1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3HAC17335-1 identity before exchange
Replace 3HAC17335-1 only after matching the complete article code, industrial control board, installed ABB Robots role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3HAC17335-1
- Product class: industrial control board
- Family check: ABB Robots
The ABB 3HAC17335-1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical data prepared for 3HAC17335-1
- Product family: ABB Robots
- Exact ABB identity required before service
Documentation for ABB 3HAC17335-1 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30 × 6.3 cm
-
Shipping weight8.56 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3HAC17335-1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which electrical checks apply before energising 3HAC17335-1?
Confirm the documented supply, interface, insulation condition and protective earth before energising 3HAC17335-1. -
What commissioning evidence is needed after fitting 3HAC17335-1?
Record power-up status, diagnostics, the affected function test and final maintenance approval for 3HAC17335-1. -
Which companion hardware must match 3HAC17335-1?
Verify the documented rack, control unit, power stage, connector assembly and adjacent hardware paired with 3HAC17335-1. -
What drawings should engineering review before installing 3HAC17335-1?
Review the installed hardware list, cabinet drawing, connection diagram and controlled ABB Robots service documentation for 3HAC17335-1. -
How is interchangeability assessed for 3HAC17335-1?
Physical similarity is insufficient; 3HAC17335-1 must match the complete article identity, interface and approved system configuration. -
What diagnostics should maintenance review for 3HAC17335-1?
Review power, communication, gate, I/O or controller status relevant to 3HAC17335-1, then record resolved alarms. -
Which nameplate fields identify 3HAC17335-1 for a maintenance replacement?
Match the complete ABB article code 3HAC17335-1, its board or device designation, product family and installed position. -
Which connections must be recorded before removing 3HAC17335-1?
Photograph connector keying, terminal references, cable destinations, shields, earth points and neighboring assemblies used by 3HAC17335-1.
READY TO VERIFY YOUR PART?
Get a 3HAC17335-1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
