PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- MNSiS Series
- 1TGE102009R4800
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
1TGE102009R4800 MLink Control Unit
ABB 1TGE102009R4800 is a MLink Control Unit for the MNSiS Series. It is used to mnsi Series. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete MLink Control Unit
ACTUAL APPLICATIONS
Application context for 1TGE102009R4800
Manufacturer documentation places the Mlink Control Unit in practical electrical applications. The three cases below describe different operating tasks in which 1TGE102009R4800 performs its documented product-family role with the configured companion equipment.
- 01 · GENERAL MANUFACTURING
Synchronize pallet transfer during blocked-zone recovery
As part of the turntables, lifts and shuttle cars, 1TGE102009R4800 serves its documented function as a Mlink Control Unit. During blocked-zone recovery, the system uses this function to re-establish the transfer path after the obstruction clears, helping it resume flow without losing tracking data. - 02 · POWER GENERATION
Synchronize turbine auxiliary control with Mlink Control
Inside the lube-oil pumps and turning gear, 1TGE102009R4800 operates in its approved product-family role as a Mlink Control Unit. During unit run-up, the system uses this function to coordinate permissives and auxiliary equipment states, helping it support a stable transition to rated operation. - 03 · MACHINERY MANUFACTURING
Observe machine-tool automation during cycle start
As part of the spindles, axes and tool changers, 1TGE102009R4800 handles its designated signal or control duty as a Mlink Control Unit. During cycle start, the system uses this function to coordinate the equipment states required by the active cycle, helping it complete the machining step with traceable status.
Technical specifications for 1TGE102009R4800
-
Product Model1TGE102009R4800
-
Product ParametersMLink Control Unit
-
In stock1 unit
-
ManufacturerABB
-
Exact Article Code1TGE102009R4800
-
Product FamilyMNSiS Series
-
Component TypeMlink Control Unit
-
System ClassDCS System
-
Mounting FormatPlug-in control rack
-
System InterfaceMNS iS internal bus
-
Control Supply24 V DC control supply
-
Channel CapacityModel-defined channel set
-
Signal StandardSystem-specific I/O levels
-
Electrical IsolationIsolated field circuits
-
Operating Temperature0 to +55 °C cabinet range
-
Protection LevelMotor-control-center section
-
Configuration ToolMNS iS engineering tools
-
Commissioning TestI/O and diagnostic functional test
View all additional
Alternative Names
1TGE102009R4800
MNSiS Series MLink Control Unit
ABB MLink Control Unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 1TGE102009R4800 to the installed MNSiS Series
ABB 1TGE102009R4800 is a MLink Control Unit used in the MNSiS Series. Use 1TGE102009R4800 in the specified MNSiS Series position with the documented supply, signal range and system interface. Match the complete article code and installed rack records before service.
Record terminal numbers, connector keying, rack position, shields and protective earth for 1TGE102009R4800. Preserve the approved ABB configuration and cable routing during exchange. Confirm dcs system, plug-in control rack, the exact mechanical position and the approved system configuration before connection.
After fitting 1TGE102009R4800, check power and module diagnostics, then test the affected I/O, communication, controller or measurement function at a safe operating point and record acceptance. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 1TGE102009R4800
- Product class: MLink Control Unit
- Family: MNSiS Series
The ABB 1TGE102009R4800 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 1TGE102009R4800 identity before exchange
Replace 1TGE102009R4800 only after matching the full article identity, MLink Control Unit, installed 24 v dc control supply and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, system-specific i/o levels, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete i/o and diagnostic functional test. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 1TGE102009R4800
- Connection: System-specific I/O levels
- Test: I/O and diagnostic functional test
The ABB 1TGE102009R4800 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 1TGE102009R4800
- Installation checks matched to MNSiS Series
- Exact ABB identity required before service
Documentation for ABB 1TGE102009R4800 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30 × 6.3 cm
-
Shipping weight3 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 1TGE102009R4800
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should a distributor quote the complete 1TGE102009R4800 identity?
Specify ABB 1TGE102009R4800, quantity, MNSiS Series, destination and required PDF scope in the quotation request. -
Which ABB family documentation applies to 1TGE102009R4800?
Use the ABB documentation for MNSiS Series and confirm that the exact 1TGE102009R4800 code appears in the applicable hardware scope. -
How should technicians confirm the signal range for 1TGE102009R4800?
Compare the connected field circuit with System-specific I/O levels and use calibrated test equipment before applying signals to 1TGE102009R4800. -
Which electrical values must maintenance check on 1TGE102009R4800?
Confirm 24 V DC control supply, System-specific I/O levels, Isolated field circuits and protective earth before connecting 1TGE102009R4800. -
What commissioning result releases 1TGE102009R4800 for service?
For 1TGE102009R4800, complete the I/O and diagnostic functional test, confirm normal diagnostics and record the affected equipment response. -
What companion hardware must match 1TGE102009R4800?
Verify the rack, controller, power supply, bus coupler, terminal assembly and adjacent modules documented for 1TGE102009R4800. -
What installed-system evidence is needed before replacing 1TGE102009R4800?
Archive the rack drawing, connection photographs, project or configuration backup and current diagnostics before removing 1TGE102009R4800. -
Can a visually similar module directly replace 1TGE102009R4800?
Physical similarity is insufficient; a replacement for 1TGE102009R4800 must match the full code, family, interface, signal range and approved configuration.
READY TO VERIFY YOUR PART?
Get a 1TGE102009R4800 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
-
-
330851-02-00-080-10-00-00Differential expansion proximity probeManufacturer: Bently NevadaView Details
-
-
-
-
-
-
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
