ALL MANUFACTURERS

I/O TERMINAL BOARD

System Power: 24 V DC
Field Power:24V DC
Data Transfer Rate: 
up to 12 Mbps for PROFIBUS DP

SWITCH POWER SUPPLY

SWITCH POWER SUPPLY
(80026-096-01)
INPUT: 48VDC 1.5A MAX
OUTPUT: 24VDC/2A

Cylinder Pressure I/O Module

Supply Voltage: 24V DC (±10%)
Power Consumption: <10W (typical)
Voltage: ±10V, 0–5V
Current: 4–20 mA
Excitation Voltage: 24V DC
Output Type: Analog (4–20 mA)
Accuracy: ±0.1% FS 
Resolution: 16-bit or higher 
Bandwidth: DC to 20 kHz

Power Module

SINAMICS G120 Power Module 
PM 250 with integrated Class A 
filter capable of energy recovery 
380-480 V 3 AC +10/-10% 47-63 Hz 
Power high overload: 7.5kW at 200% 3s
150% 57s, 100% 240 s
Ambient temperature 0 to +50 °C 
Power low overload: 11kW at 150% 3s
110% 57s, 100% 240 s
Ambient temperature 0 to +40 °C
FSC Degree of protection 
IP20 without Control Unit and BOP

VIB340B Backplane 19"

Binary Control Module

Range: Typically 20.4 V DC
Series: 83SR Safety Relay System
Channel-to-Backplane/Logic: Yes 
Isolation Voltage: Typically 250V AC
Safety Certification: TÜV Rheinland certified

SINAM PWR BLK 1035VDC/1405A MOMO U/V/WPH

FTA interconnection cable

System Interconnection Cable For Chassis IO
FS-SICC-0001/Lx (where × = length)
20 × AWG 22 (= 0.34 mm²) double shielded
9.93 mm / 0.39 in
3 = 3m 

MNS iS Motor Control Center

PROFIBUS DP (-V0) and PROFIBUS DP-V1
MODBUS RTU / TCP 
Power Supply 24V DC
Power Consumption Typical 1000mA

MOTOR,SYNC,3AC,0.85NM,0.4KW,6000RPM

Rotor Kit Motor Speed Control RK4

Pulse Frequency: 1 Hz to 20 kHz
Voltage Range: 5–30V peak
Analog Output: 4–20 mA
Speed Range: 0–20,000 RPM 
Accuracy: ±0.1% of reading
Resolution: 0.1 RPM 

INVERTER TRIGGER DRIVER BOARD

Input Voltage: 24 V DC
Operating Temperature: -10°C to +70°C.
Storage Temperature: -25°C to +85°C.
Humidity: 5% to 95% non-condensing.

AC drive

Output Current: 105 A
Integrated Filter: L500 
Frame Size: R7
Cooling Method: Air cooling 
Voltage:3-phase 380–480 V AC (±10%)
Frequency:47–63 Hz
 Input Current:120 A
Motor Power Range:55–75 kW 
 Apparent Power (S1):89 kVA (at 480 V)

Pressductor PillowBlock Web Tensiometer

Measurement Range:0–50 kN 
Accuracy"±0.5% of full scale (typical)
Digital Option:RS-485 Modbus RTU 
Excitation Voltage:10–30 V DC
Bridge Resistance:350 Ω ±1%
Cable Length:Standard 10m
Overload Capacity:150% of rated range