Allen-Bradley

AC frequency converter

PowerFlex 753 AC Drive
with Embedded I/O
Standard Protection
Forced Air
AC Input with DC Terminals
Flange Type
37 Amps
18.5kW ND
15kW HD
400 VAC
3 PH, Frame 3
Filtered, CM jumper installed (preferred)
DB Transistor, Blank (No HIM)

AC frequency converter

PowerFlex 753 AC Drive
with Embedded I/O
Standard Protection
Forced Air, AC Input with DC Terminals
Flange Type, 22 Amps, 11kW ND
7.5kW HD, 400 VAC, 3 PH, Frame 2
Filtered, CM jumper installed (preferred)
DB Transistor, Blank (No HIM)

ControlLogix Digital AC Input Module

Part Number/Catalog No:1756-IN16
Series:ControlLogix
Module Type:Digital AC Input Module
Inputs:16
Input Voltage:24 Volts Ac
Operating Voltage Range:10-30 Volts AC
Input Delay Time:Programmable 9 or 18 milliseconds
Minimum Operating Current:5 milliamperes at 10 Volts AC, 60 Hertz
Maximum Operating Current:1.2 milliamperes at 30 Volts AC, 60 Hertz
Maximum Input Current, Off-State:2.75 milliamperes

ControlLogix Fast Digital Module

Series:ControlLogix
Module Type:Fast Digital DC Isolated Input
Inputs:16 Individually Isolated
Input Voltage:12-24 Volts DC
Operating Voltage Range:10-30 Voltage DC
Input Delay Time:14 microseconds plus selected filter time
Current Draw (5.1 Volts):275 milliamps
Current Draw (24 Volts):3 milliamps
Power Dissipation:3.8 Watts

POINT I/O Analog Output Module

Series:POINT I/O
Module Type:Analog Output Module
Outputs:4 Single Ended
Data Format:Signed Integer
External DC Supply Current:220 mA
Output Signal Range:4 to 20 mA, 0 to 20 mA
Output Resolution:16 bits across 0 to 21 mA
Conversion Type:Digital-Analog
Conversion Rate:20 microseconds
Resolution:14 bits

SLC 500 DeviceNet Scanner Module

Module Width:Single Slot
Compatible controllers:SLC 5/02 or later
Pass through: Supported
Communication Port:One (1) DeviceNet
Data Transfer speed:125Kbps
Linear Plug:1787-PLUG10R
Indicators:Mod/Net Status - red/grn; I/O Status - red/grn
Mounting:DIN Rail; Panel Mounting
Storage Temperature:-40 to 85 C (-40 to 185 F)

Stratix Managed Switches

Series:Stratix Managed Switches
Part Number:1783-MX08T
Relative humidity:5% to 95%
Connector Type:10/100 Base-T Copper Ethernet Port
Enclosure:Open type
Number of Ethernet Copper ports:8
Operating Temperature:-40 to 60 degrees Celsius
Network Type:Ethernet

Discrete Input module

Module Type:Digital AC/DC Input Module
Number of Inputs:8 Inputs
Voltage Category:120 Volts AC/DC
Compatible Chassis:1771-AB thru 1771-A4B
AC Operating Voltage:87-138 Volts
DC Operating Voltage:97-138 Volts
Backplane Current:75 Miliamperes

Remote Access Dial-In Data/Fax Modem

REMOTE ACCESS DIAL-IN DATA/FAX MODEM
V.90 COMPATIBLE
EXTERNAL
WITH 1 X RS-232 INTERFACE
24 VDC POWER

CompactLogix 5370 L1 controller

Ethernet nodes:8 Nodes
No. of Task:32 Task
No. of Program per Task:100
No. of Embedded Inputs:(16) 24 VDC
Module Type:Processor Module
Communication:Ethernet
Input Power:24 Volts DC
Memory:512KB
Communication Cable:6 Point
Shipping Weight:3 pounds

Compact GuardLogix Controller

Application Memory:4 MB
Safety Memory:2 MB
Non-volatile memory:2GB via 1784-SD2 
Local I/O modules:31 I/O modules
Communication Ports:1 Type B 2.0 
Full-Speed USB and 2 Ethernet/IP Ports
Communication rate, Ethernet:10 Mbps / 100 Mbps / 1 Gbps
User Memory:4 MB + 2 MB safety
Ports:2 Ethernet

SLC 500 Memory Module

Module Type:Memory Module Adapter
Memory:8 kilobytes, 1,000 instructions
Memory Type:EEPROM
User Memory:64,000 Words
Program Scan Time:0.9 milliseconds
I/O Scan Time:0.225 milliseconds
I/O Chassis:3
Chassis Module Slots:30
Communication:Ethernet, RS-232

Controller Circuit Board

CONTROL BOARD
Controller Circuit Board
FOR POWERFLEX 7000
FOR AC DRIVE
PWM ONLY
PCB BOARD
Analog Control Board for 18 Pulse Drive

Analog Current Output Module

Outputs per module 2 channel single-ended, nonisolated
Output current 0…20 mA
Resolution 12 bits, 1/4096 max, 4.88 µA/bit
Converted data Binary data 0000 to 0fff (max scale)
Conversion time 2 ms/channel
Overall accuracy 0.2% Full scale @ 0…55 °C
Calibration None required
Allowable external output load resistance600 Ω max 

Distance Fiber Module

Fiber Type:200/ 230 micron HCS (hard-clad silica) fiber
Fiber Operating Wavelength:650 nm (red)
Attenuation Levels:4.2 dB
Input Power:5V DC
Typical Repeater Distance:0-300m
Backplane Current Draw:300 mA
Product Line:ControlNet Repeater
Repeater Type:Repeater Short-Distance Fiber Module

SLC 500 Backup Scanner Module

Series:SLC 500
Module Type:Backup Scanner Module
Compatible Processors:SLC 5/02, 5/03, 5/04, 5/05
Backplane Current (5 Volts):800 milliamps
Operating Temperature:0-60 Celsius
Cable:Belden 9463
Connectors:6-Pin Phoenix Connector
Weight:2.5 pounds (1.1 kilograms)

Input Module

Part Number/Catalog No.:1734sc-IF4U
Product Type:Input Module
Rockwell Compatible Series:Point I/O
Channels:4
Input Type:Analog
Resolution:18 bits
Input Impedance:253 ohm
Input Overcurrent Protection:32 mA cont
Thermal Dissipation:1 W min

Point I/O module

Series:POINT I/O
Module Type:Serial Interface Module
Key Switch Position:2
Voltage Range:10-28.8 volts DC
Supply Voltage:24 volts DC nominal
Supply Current:15mA at 24 volts DC

SSI Module

Product Description:Serial Synchronous Interface (SSI) module
SSI Channels:1
Product Family:1734 POINT I/O
Supply Voltage:10-28.8 Volts DC
Part Number:1734-SSI
POINTBus Current:110 milliamps
Power Dissipation:0.94 Watts
No of SSI channels:One (1) SSI port
Supply current :110mA @ 24V dc
Operating Temperature:-20 to 55oC (-4 to 131oF)
Storage Temperature:-40 to 85°C (-40 to 185°F)

Expansion Module Safety Relay

440REM4R2
EXPANSION MODULE
GUARDMASTER
GSR EM
MONITORING SAFETY RELAY
1 SINGLE WIRE SAFE INPUT
1 NC SOLID STATE AUX OUTPUT
24 VDC SUPPLY

SAFETY RELAY

440RS12R2
SAFETY RELAY
GUARDMASTER
SINGLE INPUT
1 DUAL CHANNEL UNIVERSAL INPUT
1 N.C. SOLID STATE AUXILIARY OUTPUTS
24 VDC 2.5 W SUPPLY
AC15 250V / 1.5 AMP
DC13 24V / 2 AMP OUTPUT
REPLACES 440R-J23106

POINT I/O Terminal Module

Part Number/Catalog No.:1734-CTM
Series:POINT I/O
Module Type:Terminal Module
Isolation Voltage:250 Volts Continuous
Field Power Supply:1-28.8 Volts DC or 12/240 Volts AC
Field Power Supply Current:4 amps/module

Compact 5000 analog input module

Overvoltage protection, max:± 30V DC
Overcurrent protection, max:±30 mA
Open circuit detection time:2 seconds
Module Keying:Electronic
Number of Inputs:8 Differential Inputs
Number of Outputs:N/A
Voltage Category:N/A
Input Voltage Range:+/- 10 Volts, 0-10 Volts, 0-5 Volts
Output Voltage Range:N/A
Power Dissipation:2.1 Voltage Mode and 2.4 Current Mode
Enclosure Type:None (Open Style)

Guard Locking Proximity Inputs Safety Relay

Product Type: Safety Relay
Model Number: 440R-GL2S2P
Series: Guardmaster
Input Voltage: 24V DC
Voltage Tolerance: -15% to +10%
Current Consumption: Approx. 200mA
Power Consumption: Typically 4.8W
Relay Output Type:
Safety Outputs: 2 NO
Auxiliary Outputs: 1 NC 

SMC Flex Smart Motor Controller

Product Line:SMC-Flex
Part Number/Catalog No.:150-F43NBD
Bulletin Number:Solid-State Controller
Controller Ratings:480 Amps, 
400 Horsepower at 460 Volts AC
Input Line Voltage:200 to 460 Volts AC
Control Voltage:120 / 240 VAC
Rated Voltage:500 to 575 Volts AC