PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
PlantPAx process control with 10 MB user memory
Allen-Bradley 1756-L83EP provides 10 MB of user memory for ControlLogix 5580 process applications and supports up to 250 EtherNet/IP devices. The controller includes dedicated PlantPAx process instructions, a default process tasking model and an embedded gigabit Ethernet interface.
Use this catalog where the configured process project fits its memory and communications limits. Check the PlantPAx release, supported firmware and chassis before replacement. Redundant operation requires the documented architecture and introduces restrictions on embedded Ethernet, motion and several legacy network connections.
Use this catalog where the configured process project fits its memory and communications limits. Check the PlantPAx release, supported firmware and chassis before replacement. Redundant operation requires the documented architecture and introduces restrictions on embedded Ethernet, motion and several legacy network connections.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Process-control roles for 1756-L83EP
These applications follow the official process-controller and PlantPAx documentation. They describe engineering roles within a configured system; they do not identify a named customer installation or establish suitability without a project review.
-
01 · Process equipment
Coordinated process units
The controller executes the configured process tasks and communicates with compatible I/O for a process unit. Its 10 MB memory and 250-device capacity must be checked against the actual application and network load. -
02 · High availability
Qualified process redundancy
For supported redundant systems, the controller operates within a qualified chassis pair using the required modules and firmware. Assess the documented network and motion restrictions before enabling redundancy. -
03 · Supervisory data
Process information exchange
The official table lists up to 1200 OPC UA nodes with the specified software version. Select and secure the process data needed by the supervisory application, and validate actual system loading during commissioning.
Technical specifications for 1756-L83EP
-
Product Model1756-L83EP
-
Product ParametersControlLogix 5580 process controller
-
In stock1 unit
-
ManufacturerAllen-Bradley
-
User memory10 MB
-
EtherNet/IP device capacity250 maximum
-
Controller tasks32
-
Programs per task1000
-
Embedded EthernetOne port; 10/100/1000 Mbps
-
USB service interfaceUSB 2.0; temporary local programming
-
Backplane current1.2 A at 5.1 V DC; 5 mA at 1.2 V DC
-
Power dissipation6.2 W
-
Isolation rating50 V continuous; documented port-to-backplane isolation
-
Conformal coatingYes
-
Slot widthOne chassis slot
-
Operating temperature-25 to +60 degrees Celsius in supported Series C standard chassis
View all additional
Alternative Names
1756-L83EP PlantPAx controller
ControlLogix 5580 1756-L83EP
Allen-Bradley 1756-L83EP process PLC
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
PLANTPAX PROCESS CONTROL
Match the controller to the installed process architecture
The process controller uses dedicated PlantPAx instructions and a configured process tasking model. Confirm the installed PlantPAx release, project instruction requirements and sufficient user memory before selecting the catalog number.
Verify the supported chassis, power supply and controller firmware. Review the environmental rating for the whole assembly, including the chassis series and the protective measures required for corrosive atmospheres.
For redundant operation, follow the supported firmware and module configuration. The embedded Ethernet port is off and integrated motion is unsupported when controller redundancy is enabled; other network restrictions also apply.
Features:
- PlantPAx release and project compatibility
- Chassis-specific environmental ratings
- Documented redundancy configuration
The Allen-Bradley 1756-L83EP requires process-project and architecture checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Rockwell Automation lists 1756-L83EP as End of Life and specifies 31 December 2026 as the discontinuation date. As of the review on 7 September 2026, this date is still in the future.
The manufacturer identifies 1756-L83EPXT in the Direct Replacement category. Check the replacement controller firmware, supported chassis, PlantPAx release and application requirements before deciding the migration work.
Back up the approved controller project and verify communication paths and process-task behavior after replacement. Where redundancy is configured, validate qualification, synchronization and switchover using the applicable manufacturer procedure.
Features:
- Check the announced 31 December 2026 lifecycle date
- Review 1756-L83EPXT compatibility
- Validate the migrated process application
The Allen-Bradley 1756-L83EP requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon is an independent supplier. Consult the applicable Rockwell Automation documentation and installed configuration before selection, installation or replacement.
Features:
- Exact-model reference documents
- Hardware and system compatibility checks
- Accessories are supplied only when listed in the quotation
Documentation for the Allen-Bradley 1756-L83EP supports document applicability checks before installation or replacement.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUnited States of America
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 1756-L83EP
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the 1756-L83EP memory capacity?
This catalog provides 10 MB user memory. It is a process-controller capacity, not a claim that memory, I/O limits and network capacity are interchangeable with another 5580 model. -
Does the 250-device limit include every network connection?
The published EtherNet/IP node limit concerns devices added directly to the controller I/O configuration. Other network-module and messaging limits are separate; assess the complete architecture. -
Does 1756-L83EP support OPC UA?
The 1756-TD001W process-controller table lists 1200 OPC UA nodes for this model with Studio 5000 Logix Designer version 36 or later. Verify the installed firmware and actual OPC UA configuration. -
Can I use the embedded Ethernet port after enabling redundancy?
The documented redundancy configuration turns off the embedded Ethernet port. Provide the supported communications modules and verify the redundancy system design before enabling it. -
What is the published replacement for 1756-L83EP?
Rockwell Automation identifies 1756-L83EPXT as Direct Replacement. Review controller firmware, chassis requirements, PlantPAx compatibility and environmental conditions before applying it to an installed system. -
Has the announced discontinuation date already passed?
No. At the review date of 7 September 2026, the manufacturer lists End of Life with discontinuation scheduled for 31 December 2026. Do not describe that future date as a completed event.
READY TO VERIFY YOUR PART?
Get a 1756-L83EP quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
