PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
1756-OF6VI Isolated Analog Voltage Output Module
1756-OF6VI is a six-channel isolated analog voltage output module in the Allen-Bradley ControlLogix family. It supplies independently isolated voltage signals for compatible industrial control circuits.
The module uses 14-bit conversion across a 21 V span and supports integer or IEEE 32-bit floating-point data. Each output is isolated from the other channels and the backplane. Electronic current limiting protects against short circuits, and removable terminal blocks provide the field connections. Channel scaling and configured output behavior are managed through the controller project.
The module uses 14-bit conversion across a 21 V span and supports integer or IEEE 32-bit floating-point data. Each output is isolated from the other channels and the backplane. Electronic current limiting protects against short circuits, and removable terminal blocks provide the field connections. Channel scaling and configured output behavior are managed through the controller project.
BEFORE YOU BUY
Confirm the complete isolated analog voltage output module
ACTUAL APPLICATIONS
Application context for 1756-OF6VI
1756-OF6VI provides isolated analog voltage outputs in compatible ControlLogix systems for food production, chemical processing and industrial manufacturing. Channel scaling, load resistance, terminal-block selection and the controller configuration determine suitability for the connected circuits.
-
01 · FOOD & BEVERAGE
Food Manufacturing and Beverage Processing
Food Production and ProcessingBeverage Processing and Packaging -
02 · CHEMICAL PROCESSING
Chemical Manufacturing and Process Production
Industrial Chemical ProductionChemical Processing and Formulation -
03 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Production Automation
Automated Manufacturing and ProductionFactory Production and Assembly
Technical specifications for 1756-OF6VI
-
Product Model1756-OF6VI
-
Spare Model1756OF6VI,1756-OF6VI/A
-
Product ParametersIsolated Analog Voltage Output Module
-
In stock4 units
-
ManufacturerAllen-Bradley
-
Output channels6 individually isolated
-
Output range±10.5 V
-
Resolution14 bit across 21 V; 1.3 mV
-
5.1 V backplane current250 mA
-
24 V backplane current175 mA
-
Total backplane power5.5 W
-
Power dissipation4.85 W maximum
-
Output impedanceLess than 1 ohm
-
Output loadGreater than 1000 ohm; 10 mA drive capability
-
Settling timeLess than 2 ms to 95% with resistive load
-
Calibrated accuracy at 25℃Better than 0.1% of range
-
Module scan time25 ms floating-point; 10 ms integer maximum
-
Isolation voltage250 V continuous, channel-to-backplane and channel-to-channel
-
Data formatInteger or IEEE 32-bit floating-point
-
Removable terminal blocks1756-TBNH or 1756-TBSH
View all additional
Alternative Names
1756-OF6VI
ControlLogix Isolated Analog Voltage Output Module
ControlLogix 6 individually isolated output channels
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 1756-OF6VI isolated analog voltage output module
1756-OF6VI is an isolated analog voltage output module in the ControlLogix platform. Match the exact article and hardware revision to the installed backplane and controller configuration before allocating channels, connections or network resources.
Compare output channels (6 individually isolated), output range (±10.5 V) and resolution (14 bit across 21 V; 1.3 mV) with the project requirements. Use the applicable terminal assignments, power budget and grounding requirements from the manufacturer documentation.
Configure the supported operating modes for 1756-OF6VI, then verify the affected signals or communications in the approved controller project. Record configuration changes, diagnostic results and the completed functional checks with the equipment record.
Features:
- Output channels: 6 individually isolated
- Output range: ±10.5 V
- Resolution: 14 bit across 21 V; 1.3 mV
The 1756-OF6VI isolated analog voltage output module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 1756-OF6VI isolated analog voltage output module
Replace 1756-OF6VI after comparing the complete label, hardware revision and ControlLogix role with the installed article. Confirm connector allocation and the supported controller configuration before exchanging the module.
Preserve the controller project and relevant channel or communication settings before removing 1756-OF6VI. Photograph field connections and grounding, identify connected circuits, and isolate the required power supplies according to the manufacturer procedure.
Restore the approved configuration after fitting 1756-OF6VI. Check module status indications, the affected I/O or network connections and the required operating responses, then retain the replacement identity and final acceptance results.
Features:
- Output channels: 6 individually isolated
- Output range: ±10.5 V
- Resolution: 14 bit across 21 V; 1.3 mV
The 1756-OF6VI isolated analog voltage output module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 1756-OF6VI isolated analog voltage output module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size14.5 × 14 × 3.5cm
-
Shipping weight0.28kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 1756-OF6VI
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Are the six ControlLogix voltage output channels isolated from each other?
Yes. The channels are individually isolated, with 250 V continuous isolation between channels and from channels to the backplane. -
What conversion resolution is available across the bipolar output span?
1756-OF6VI provides 14-bit resolution across 21 V, corresponding to approximately 1.3 mV. -
Can the module exchange floating-point values with the controller?
Yes. It supports IEEE 32-bit floating-point data and an integer data format. -
How quickly does an output settle after a voltage change?
With a resistive load, settling to 95% of the final value takes less than 2 ms. -
What minimum resistance is required for the isolated voltage load?
The documented drive capability requires loads greater than 1000 ohm, with 10 mA drive capability. -
Which removable terminal blocks match the six-channel isolated voltage module?
Use the documented 1756-TBNH or 1756-TBSH terminal block and the correct mechanical keying. -
Which channel configuration should be included in an OF6VI spare request?
Provide the exact module series, controller revision, terminal-block selection, quantity and required channel scaling. -
How should an isolated analog replacement be checked on receipt?
Compare the 1756-OF6VI label, series, terminal-block keying and connector condition with the approved order.
READY TO VERIFY YOUR PART?
Get a 1756-OF6VI quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
