PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- B&R
- 8V1180.001-2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
8V1180.001-2 ACOPOS servo drive
B&R 8V1180.001-2 is a ACOPOS servo drive for the B&R ACOPOS motion control systems. It is used to 50 / 60 Hz ±4%. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete ACOPOS servo drive
ACTUAL APPLICATIONS
Application context for 8V1180.001-2
Manufacturer documentation places the Acopos Servo Drive in practical motion applications. The three cases below describe different operating tasks in which 8V1180.001-2 performs its documented product-family role with the configured companion equipment.
- 01 · AUTOMOTIVE
Manage body transfer during model change process control
In the automation chain for the skid conveyors and lift stations, 8V1180.001-2 handles its designated signal or control duty as a Acopos Servo Drive. During model change, the system uses this function to coordinate motion requests and station interlocks, helping it keep the assembly takt moving. - 02 · ELECTRONICS MANUFACTURING
Protect laser processing during high-speed cycle
For the coordinated operation of the scan axes and beam-positioning stages, 8V1180.001-2 performs its assigned control role as a Acopos Servo Drive. During high-speed cycle, the system uses this function to sequence rapid moves around the active process window, helping it maintain throughput without violating settling time. - 03 · MACHINERY MANUFACTURING
Synchronize press sequencing during part change
Within the feed systems, dies and safety interfaces, 8V1180.001-2 serves its documented function as a Acopos Servo Drive. During part change, the system uses this function to apply the selected product recipe to the sequence, helping it produce the intended part without skipping an interlock.
Technical specifications for 8V1180.001-2
-
Product Model8V1180.001-2
-
Product ParametersACOPOS servo drive
-
In stock1 unit
-
ManufacturerB&R
-
Model Number8V1180.001-2
-
Mains Input3 × 400 to 480 V AC ±10%
-
Supply Frequency50 / 60 Hz ±4%
-
Installed Load17 kVA maximum
-
Inrush Current13 A at 400 V
-
Motor Current19 A continuous
-
Peak Current50 A
-
Motor Power9 kW class
-
Switching Frequency5 / 10 / 20 kHz
-
DC Bus Capacitance940 µF
-
Control Supply24 V DC +25% / -20%
-
DC Switch-on455 V DC
-
Output Frequency598 Hz maximum
-
Line FilterEN 61800-3 Category C3
-
Plug-in Slots4 module slots
View all additional
Alternative Names
8V1180.001 2
B&R ACOPOS motion control systems ACOPOS servo drive
B&R ACOPOS servo drive
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 8V1180.001-2 to the installed B&R ACOPOS motion control systems
B&R 8V1180.001-2 is a ACOPOS servo drive used in the B&R ACOPOS motion control systems. Use 8V1180.001-2 as the ACOPOS servo drive in the B&R ACOPOS motion control systems. Confirm supply frequency 50 / 60 Hz ±4% and the exact installed arrangement before connection.
Record the product label, switching frequency (5 / 10 / 20 kHz), cable identification, grounding and adjacent hardware before removing the installed unit. Confirm 13 a at 400 v, 19 a continuous, the exact mechanical position and the approved system configuration before connection.
After installation, verify line filter (EN 61800-3 Category C3), check diagnostics and test the affected function before returning the equipment to service. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 8V1180.001-2
- Product class: ACOPOS servo drive
- Family: B&R ACOPOS motion control systems
The B&R 8V1180.001-2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 8V1180.001-2 identity before exchange
Replace 8V1180.001-2 only after matching the full article identity, ACOPOS servo drive, installed 9 kw class and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, 940 µf, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete 4 module slots. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 8V1180.001-2
- Connection: 940 µF
- Test: 4 module slots
The B&R 8V1180.001-2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 8V1180.001-2
- Installation checks matched to B&R ACOPOS motion control systems
- Exact B&R identity required before service
Documentation for B&R 8V1180.001-2 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504409999
-
OriginAustria
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 8V1180.001-2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which supply frequency must engineering verify for 8V1180.001-2?
For 8V1180.001-2, verify the documented supply frequency is 50 / 60 Hz ±4% and confirm the remaining nameplate limits before connection. -
How should maintenance document the switching frequency before removing 8V1180.001-2?
Photograph the switching frequency, which is 5 / 10 / 20 kHz, plus terminal labels, cable routing, shields and adjacent hardware for 8V1180.001-2. -
What does the mains input value mean when sourcing 8V1180.001-2?
The exact documented value for 8V1180.001-2 is 3 × 400 to 480 V AC ±10%; use it with the full article code when checking the supplied configuration. -
Which inrush current limit applies during commissioning of 8V1180.001-2?
Apply 13 A at 400 V for inrush current on 8V1180.001-2; also confirm protection, polarity and the approved startup procedure. -
Can a distributor quote 8V1180.001-2 from a shortened code?
No. Quote the complete identity 8V1180.001-2, manufacturer, quantity, destination, product photos and required documentation scope. -
What receiving inspection is appropriate for the ACOPOS servo drive 8V1180.001-2?
Inspect 8V1180.001-2 for the full label, connector condition, revision markings, shipping damage and consistency with B&R ACOPOS motion control systems. -
Which system record should be retained after replacing 8V1180.001-2?
Retain the incoming inspection, original connection record, configuration backup, measured results and service approval for 8V1180.001-2. -
How is the restored ACOPOS servo drive function tested for 8V1180.001-2?
Check status indications, diagnostics and the affected ACOPOS servo drive response, then record the final result against 8V1180.001-2.
READY TO VERIFY YOUR PART?
Get a 8V1180.001-2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
