
















330104 3300 XL 8 mm Probe
330104 3300 XL 8 mm Probe
M10 x 1 thread,with armor
Example: 0 8 = 8 mm
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
General Purpose Equipment Monitor
Vibration Variables:±1% of full scale range
3-wire VoltageMode:10 kΩ
Bias Filter:0.09 Hz 1-pole low-pass
OK Filter: 2.4 kHz 1-pole low-pass
BiasVoltage:-24 V
Recip Cylinder Pressure Monitor
Series: 3500 Series
Standard: 0-5,000 psi (0-345 bar)
Sampling Rate: Up to 100 kHz per channel
ADC Resolution: 16-bit
Power Supply: 24 VDC (±10%)
3300 XL 8mm Proximity Probe
Frequency Response: 0 Hz (DC) to 10 kHz
Noncontacting
Gap-to-Voltage Transducer Systems
Measures Static and Dynamic Distances
3500/60 I/O Module
Analog inputs: 4–20 mA, ±10V
Analog outputs (4–20 mA
Voltage range: ±10V, 0–10V.
Current range: 4–20 mA, 0–20 mA
Digital Inputs:24V DC (±10%)
Relay contacts: 2A @ 30V DC / 250V AC
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Humidity: 5–95% non-condensing
RTD/Isolated Tip TC I/O Module
Temperature monitoring is available in 16 channels.
Temperature inputs can be RTD or TC
Accepts isolated tip thermocouples,
3-wire or 4-wire RTDs
or a combination of
TC and RTD inputs
Standard Extension Cable
3300 XL 8 mm Probe
M10 x 1 thread
withoutarmor
0 1 Miniature coaxial
ClickLocconnector with connector
0 5 Multiple Approvals
3300 XL Standard Extension Cable
040 4.0 meters (11.5 feet)
01 Armored cables
00 Not required
Voltage Rating:300V AC/DC
Operating Temp:-40°C to +150°C (-40°F to +302°F)
Capacitance:≤ 98 pF/m (30 pF/ft) ±5%
Max. System Length:8 meters
Proximity Probes
3300 XL 8 mm Probe
M10 x 1 thread
without armor
10 1.0 meter (3.3 feet)
01Miniature coaxial ClickLocconnector
with connectorprotector, standard cable
00 Not required
3300 XL 8 mm Proximity
3300 XL 8 mm Probe
M10 x 1 thread,without armor
10 1.0 meter (3.3 feet)
01Miniature coaxial ClickLocconnector
with connectorprotector, standard cable
00 Not required
3300 XL 11 mm Proximity Probes
330709 3300 XL 11 mm Probe
M16 x 1.5 thread,without armor
Minimum length:50 mm
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
3300 XL 8 mm Proximity Probes
330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 1.0 in
Maximum case length: 2.7 in
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
3300 XL 11 mm Proximity Probes
330703 3300 XL 11 mm Probe
M14 x 1.5 thread,without armor
Minimum unthreaded length:0 mm
Minimum length: 70 mm
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
3300 XL 11 mm Reverse MountProbe
3300 XL 11 mm Reverse MountProbe
330705-02-18- CC-DD-EE 3/8-24 UNFthreads
10 1.0 meter (3.3 feet)
02 Miniature ClickLoc coaxialconnector
00 Not required

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.