PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
FieldMonitor DC power supply
Bently Nevada 1701/10 is a FieldMonitor DC power supply. The supply occupies a dedicated FieldMonitor terminal-base slot and provides the logic and transducer voltages required by the other modules. The manufacturer specifies a DC input range and a separate inrush rating. It is not a proximity-input monitor.
The historical data sheet identifies the 1701/10 family and lists 1701/10-01 as its ordering entry. The existing family identifier is retained. Electrical ratings are tied to that manufacturer document; no current certificate, hardware revision or successor is assigned.
The historical data sheet identifies the 1701/10 family and lists 1701/10-01 as its ordering entry. The existing family identifier is retained. Electrical ratings are tied to that manufacturer document; no current certificate, hardware revision or successor is assigned.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 1701/10 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants. -
02 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations. -
03 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production.
Technical specifications for 1701/10
-
Product Model1701/10
-
Product ParametersFieldMonitor DC power supply
-
In stock9 units
-
ManufacturerBently Nevada
-
Input voltage range18 to 36 Vdc
-
Nominal peak inrush current30 A
-
Specified input fuse250 V, 3 A, slow-blow
-
Primary-to-chassis isolation test850 Vdc for one minute
-
Overvoltage withstandNo damage to 50 Vdc; not the operating input range
-
Input conductor size14 to 26 AWG
-
Operating temperature-20 to +70 deg C
-
Storage temperature-40 to +85 deg C
-
Operating and storage humidity5 to 95% RH, non-condensing
-
Listed spare fuse01700025
-
Supported terminal bases1701/05 or 1701/06
View all additional
Alternative Names
FieldMonitor DC power supply
FieldMonitor machinery monitoring
1701/10
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
FIELDMONITOR DC POWER SUPPLY
Integrating 1701/10
The supply occupies a dedicated FieldMonitor terminal-base slot and provides the logic and transducer voltages required by the other modules. The manufacturer specifies a DC input range and a separate inrush rating. It is not a proximity-input monitor.
The manufacturer names the 1701/05 and 1701/06 terminal bases for this supply. It installs in their designated power-supply slot. Its FieldMonitor role does not establish compatibility with a 3500 rack or with an arbitrary 24 V supply module.
Check the 18 to 36 Vdc input range, the nominal 30 A peak inrush and the specified input conductor range before installation. Use the dedicated terminal-base slot and the approved wiring instructions. The published fuse is 250 V, 3 A, slow-blow.
Features:
- Match DC input range, inrush, terminal base and fuse specification
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 1701/10 FieldMonitor DC power supply requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 1701/10 requires comparing DC input range, inrush, terminal base and fuse specification. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The manufacturer names the 1701/05 and 1701/06 terminal bases for this supply. It installs in their designated power-supply slot. Its FieldMonitor role does not establish compatibility with a 3500 rack or with an arbitrary 24 V supply module.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 1701/10 FieldMonitor DC power supply requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 1701/10 FieldMonitor DC power supply must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size12.5x2.1x10.5cm
-
Shipping weight0.36 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 1701/10
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is 1701/10 a proximity-input monitor?
The supply occupies a dedicated FieldMonitor terminal-base slot and provides the logic and transducer voltages required by the other modules. The manufacturer specifies a DC input range and a separate inrush rating. It is not a proximity-input monitor. -
How does the family number relate to the order code?
The historical data sheet identifies the 1701/10 family and lists 1701/10-01 as its ordering entry. The existing family identifier is retained. Electrical ratings are tied to that manufacturer document; no current certificate, hardware revision or successor is assigned. -
Which terminal bases accept this supply?
The manufacturer names the 1701/05 and 1701/06 terminal bases for this supply. It installs in their designated power-supply slot. Its FieldMonitor role does not establish compatibility with a 3500 rack or with an arbitrary 24 V supply module. -
What matters for wiring and power-up?
Check the 18 to 36 Vdc input range, the nominal 30 A peak inrush and the specified input conductor range before installation. Use the dedicated terminal-base slot and the approved wiring instructions. The published fuse is 250 V, 3 A, slow-blow. -
Can it run continuously at 50 Vdc?
No. The operating input range is 18 to 36 Vdc. The separate statement of no damage to 50 Vdc is an overvoltage withstand specification, not a normal operating rating. -
Which replacement fuse does the manufacturer list?
The data sheet identifies spare fuse 01700025. It specifies 250 V, 3 A, slow-blow fusing. Check the controlled service instructions before fuse replacement.
READY TO VERIFY YOUR PART?
Get a 1701/10 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
