PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 170180-02-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
External transducer interface module
Bently Nevada 170180-02-00 is an external transducer I/O module. The external I/O module connects two compatible transducers to their respective FieldMonitor monitoring module. It occupies one terminal-base slot and provides the selected sensor interface. It is not a 3500 rack monitor, and the I/O version determines the supported transducer type.
The 02 selection provides two inputs for two-wire velocity transducers. The final 00 denotes the historical Division 2 or Zone 2 option. Check the delivered marking and applicable installation drawing before hazardous-area use.
The 02 selection provides two inputs for two-wire velocity transducers. The final 00 denotes the historical Division 2 or Zone 2 option. Check the delivered marking and applicable installation drawing before hazardous-area use.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for FieldMonitor transducer I/O system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · FIELD TRANSDUCERS
Connecting the selected measurement inputs
The I/O brings supported two-wire velocity signals into the corresponding FieldMonitor channels. The matching monitor performs the machinery measurements. -
02 · MACHINE MONITORING
Preserving the sensor interface
The manufacturer lists separate electrical interfaces for two-wire velocity, Velomitor and Proximitor signals. Selecting the correct version prevents treating unlike sensor circuits as interchangeable. -
03 · FIELD SERVICE
Replacing terminal-base I/O
The module occupies one terminal-base slot and supports the selected two-channel arrangement. Maintenance must preserve transducer type, terminal-base compatibility and the applicable environmental conditions.
Technical specifications for 170180-02-00
-
Product Model170180-02-00
-
Product ParametersExternal transducer interface module
-
In stock7 units
-
ManufacturerBently Nevada
-
Transducer inputsTwo
-
Input typeTwo-wire velocity transducers
-
Base allocationOne FieldMonitor terminal-base slot
-
Input voltage range0 to -Vt
-
Current excluding transducers2.0 mA maximum
-
Operating temperature-34 to +85 deg C
-
Storage temperature-40 to +85 deg C
-
Humidity limit100% condensing, nonsubmerged, +7 to +85 deg C with protected connector
-
Historical approval selectionDivision 2 / Zone 2, option 00
-
Historical hazardous-area temperature-30 to +70 deg C
-
Applicable approval drawing139255
-
Input impedance9.98 +/- 0.02 kohm
View all additional
Alternative Names
170180 02 00
170180-02-00 external transducer I/O module
Bently Nevada 170180-02-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
EXTERNAL TRANSDUCER INTERFACE MODULE
Integrating 170180-02-00
The external I/O module connects two compatible transducers to their respective FieldMonitor monitoring module. It occupies one terminal-base slot and provides the selected sensor interface. It is not a 3500 rack monitor, and the I/O version determines the supported transducer type.
Use the corresponding FieldMonitor terminal base and two-channel monitoring module. The 01 Proximitor/accelerometer, 02 two-wire velocity and 03 Velomitor versions are distinct interfaces. A 1701/06 isolator terminal base requires option 05, not this option 00.
Match each field transducer to its documented input type and protect the connector as required. Follow drawing 139255 and the delivered approval conditions. The general operating-temperature range must not override the narrower historical hazardous-area temperature range.
Features:
- Match exact assembly, interface generation, connection and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 170180-02-00 external transducer I/O module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 170180-02-00 requires comparing exact assembly, interface generation, connection and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the corresponding FieldMonitor terminal base and two-channel monitoring module. The 01 Proximitor/accelerometer, 02 two-wire velocity and 03 Velomitor versions are distinct interfaces. A 1701/06 isolator terminal base requires option 05, not this option 00.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 170180-02-00 external transducer I/O module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 170180-02-00 external transducer I/O module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size12.6x2.1x10.5cm
-
Shipping weight0.3 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 170180-02-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 170180-02-00 identified?
The 02 selection provides two inputs for two-wire velocity transducers. The final 00 denotes the historical Division 2 or Zone 2 option. Check the delivered marking and applicable installation drawing before hazardous-area use. -
What does this component do?
The external I/O module connects two compatible transducers to their respective FieldMonitor monitoring module. It occupies one terminal-base slot and provides the selected sensor interface. It is not a 3500 rack monitor, and the I/O version determines the supported transducer type. -
Which equipment and interfaces must match?
Use the corresponding FieldMonitor terminal base and two-channel monitoring module. The 01 Proximitor/accelerometer, 02 two-wire velocity and 03 Velomitor versions are distinct interfaces. A 1701/06 isolator terminal base requires option 05, not this option 00. -
Where is this product used?
The I/O brings supported two-wire velocity signals into the corresponding FieldMonitor channels. The matching monitor performs the machinery measurements. -
What matters when installing this component?
Match each field transducer to its documented input type and protect the connector as required. Follow drawing 139255 and the delivered approval conditions. The general operating-temperature range must not override the narrower historical hazardous-area temperature range. -
Does option 00 mean that no hazardous-area approval was requested?
Not for this product family. Its historical ordering table defines 00 as Division 2 / Zone 2. Always use the current delivered marking and applicable controlled drawing; do not decode it using another family table. -
Can option 00 be fitted to a 1701/06 isolator terminal base?
The manufacturer directs users to select option 05 for the 1701/06 isolator terminal base. The option 00 listed here must not be treated as equivalent.
READY TO VERIFY YOUR PART?
Get a 170180-02-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
