PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
190501-09-99-01 Velomitor CT Velocity Transducer
Bently Nevada 190501-09-99-01 Velomitor CT Velocity Transducer measures low-frequency casing vibration on cooling-tower and air-cooled heat-exchanger fan assemblies. Its sealed transducer body combines a piezoelectric sensing element, integral signal conditioning and the specified mounting and cable arrangement. The sensor converts mechanical velocity into a proportional electrical output across the documented 3 to 900 Hz response band. This enables direct vibration trending on slow fan machinery operating at or above 90 rpm.
BEFORE YOU BUY
Confirm the complete Velomitor CT Velocity Transducer
ACTUAL APPLICATIONS
Verified application context for 190501-09-99-01
Manufacturer documentation supports these equipment applications when the complete system configuration and interfaces are verified.
-
01 · WATER & WASTEWATER
Cooling tower fan drive assemblies
Cooling equipment systemsCooling tower fan gearboxesCirculation pump motor housings -
02 · POWER GENERATION
Air-cooled condenser fan arrays
Thermal plant auxiliary systemsCondenser fan bearing housingsCooling fan drive motors -
03 · CHEMICAL PROCESSING
Heat rejection and cooling water units
Process cooling systemsCooling tower gearbox housingsHeat exchanger fan motors
Technical specifications for 190501-09-99-01
-
Product Model190501-09-99-01
-
Product ParametersVelomitor CT Velocity Transducer
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting Hardware3/8-24 to 1/4-in NPT plate stud
-
Cable Length Option99 ft maximum
-
Approval OptionAgency approval code 01
-
Sensitivity3.94 mV/mm/s ±5%
-
Frequency Response3 to 900 Hz ±1 dB
-
Velocity Range63.5 mm/s peak
-
Transverse ResponseLess than 5%
-
Amplitude Linearity±2%
-
Output Bias Voltage10.1 V DC ±1.0 V
-
Dynamic Output ImpedanceLess than 400 ohm
-
Operating Temperature-40 to +85 °C
-
Shock Limit5000 g peak
-
Humidity Limit100% condensing, non-submerged
View all additional
Alternative Names
190501 09 99 01
Bently Nevada Velomitor CT velocity transducer
Bently Nevada casing vibration measurement systems Velomitor CT velocity transducer
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 190501-09-99-01 to the installed Bently Nevada casing vibration measurement systems
Bently Nevada 190501-09-99-01 is a Velomitor CT velocity transducer for the Bently Nevada casing vibration measurement systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare sensitivity (3.94 mV/mm/s ±5%), frequency response (3 to 900 Hz ±1 dB) and velocity range (63.5 mm/s peak) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 190501-09-99-01
- Product class: Velomitor CT velocity transducer
- Family: Bently Nevada casing vibration measurement systems
The Bently Nevada 190501-09-99-01 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 190501-09-99-01 identity before exchange
Replace 190501-09-99-01 only after matching the complete article code, Velomitor CT velocity transducer, installed Bently Nevada casing vibration measurement systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 190501-09-99-01
- Product class: Velomitor CT velocity transducer
- Family check: Bently Nevada casing vibration measurement systems
The Bently Nevada 190501-09-99-01 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Official Bently Nevada 190501-09-99-01 product documentation is checked before order
- Confirm Cooling Tower and Air-Cooled Heat Exchanger Fan Monitoring configuration in current manuals
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 190501-09-99-01 Velomitor CT Velocity Transducer must match the installed Cooling Tower and Air-Cooled Heat Exchanger Fan Monitoring; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size8.0 × 10.0 × 10.0 cm
-
Shipping weight0.25 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 190501-09-99-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should 190501-09-99-01 be identified for quotation?
Use the complete 190501-09-99-01 marking, quantity and clear nameplate photographs. -
Which system details must be matched for 190501-09-99-01?
Confirm the installed Bently Nevada casing vibration measurement systems, mating hardware, signal interface and required approvals. -
What should incoming inspection cover?
Inspect the Velomitor CT velocity transducer label, housing, cable, connector and transport condition before installation. -
Can a related part number replace 190501-09-99-01?
Do not assume interchangeability; compare every order-code field, rating and physical interface. -
Which records should be captured before removal?
Record the machine location, cable routing, connector orientation, channel configuration and current gap or bias value. -
How should the replacement be commissioned?
Restore the documented mounting and wiring, then verify signal quality, alarms and channel behavior under controlled conditions. -
Which documents should remain with the asset record?
Retain the nameplate images, installation record, configuration backup, test results and acceptance evidence. -
What is the role of 190501-09-99-01?
The Velomitor CT velocity transducer performs its documented measurement or signal function within the matched Bently Nevada casing vibration measurement systems.
READY TO VERIFY YOUR PART?
Get a 190501-09-99-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
