PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Low frequency velocity transducer
Bently Nevada 190501-07-00-01 is a Velomitor CT velocity transducer configured with a 3/8-24 plate stud and MIL-C-5015 connection interface. The low frequency design addresses suitable cooling tower and air-cooled heat exchanger fan measurements, subject to the documented mounting and operating conditions.
The transducer observes casing vibration where the installation transmits the machine motion to its mounting surface. Confirm the selected stud, connector, monitor and actual approval markings before fitting a replacement. Low frequency capability does not establish compatibility with every vibration monitor or every fan operating speed.
The transducer observes casing vibration where the installation transmits the machine motion to its mounting surface. Confirm the selected stud, connector, monitor and actual approval markings before fitting a replacement. Low frequency capability does not establish compatibility with every vibration monitor or every fan operating speed.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Documented application roles
These applications describe the compatible manufacturer series, not a claim that this exact order is installed in a named project.
-
01 · COOLING SYSTEMS
Cooling tower fan monitoring
The CT series addresses the low frequency vibration of suitable cooling tower fans. A compatible monitor and properly coupled casing location are required. -
02 · HEAT EXCHANGERS
Air-cooled exchanger fan measurement
The transducer supports the documented fan application where operating speed and vibration range meet its specification. Verify sensor and monitor compatibility separately. -
03 · LOW SPEED DIAGNOSTICS
Fan bearing housing acquisition
The sensor captures velocity at a location that transmits fan machinery motion. Check the operating range and noise limits when selecting low frequency measurements.
Technical specifications for 190501-07-00-01
-
Product Model190501-07-00-01
-
Product ParametersLow frequency velocity transducer
-
ManufacturerBently Nevada
-
Mounting hardware07: 3/8-24 to 3/8-24 plate stud
-
Connection option00: MIL-C-5015 interface
-
Sensitivity3.94 mV/mm/s, plus or minus 5%
-
Frequency response1.5 Hz to 1 kHz, plus or minus 3 dB
-
Velocity range63.5 mm/s peak; operating-range restrictions apply
-
Output bias10.1 Vdc plus or minus 1.0 V, pin A to B
-
Dynamic output impedanceLess than 400 ohms typical
-
Operating temperature-40 to +85 degrees C
-
Storage temperature-40 to +100 degrees C
-
Case material316L stainless steel
-
Mounting torque4.5 N-m plus or minus 0.6 N-m
-
Mounting orientationAny orientation
View all additional
Alternative Names
190501 07 00 01
190501-07-00-01 low frequency velocity transducer
Bently Nevada 190501-07-00-01
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
LOW FREQUENCY VELOCITY TRANSDUCER
Integrating 190501-07-00-01
Bently Nevada 190501-07-00-01 is a Velomitor CT velocity transducer configured with a 3/8-24 plate stud and MIL-C-5015 connection interface. The low frequency design addresses suitable cooling tower and air-cooled heat exchanger fan measurements, subject to the documented mounting and operating conditions.
The transducer observes casing vibration where the installation transmits the machine motion to its mounting surface. Confirm the selected stud, connector, monitor and actual approval markings before fitting a replacement. Low frequency capability does not establish compatibility with every vibration monitor or every fan operating speed.
For this order, verify 07: 3/8-24 to 3/8-24 plate stud; 00: MIL-C-5015 interface; 3.94 mV/mm/s, plus or minus 5%. Family specifications apply only to the documented component and installation. Check the complete supplied identity before selecting mating equipment.
Features:
- Match the complete ordered configuration
- Use the correct manufacturer documentation
- Keep component and system specifications distinct
The 190501-07-00-01 low frequency velocity transducer requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete 190501-07-00-01 identity and the documented installation before replacement. Similar appearance, connector size or a shared family name does not establish an unconditional substitute.
Pin A goes positive relative to pin B when velocity is from the base toward the top of the transducer, as defined in the manufacturer specification.
No exact-order hardware revision, discontinuation date or designated successor was established in the reviewed manufacturer materials. Publication revision AF is not a product hardware revision; unverified lifecycle claims are not added.
Features:
- Confirm exact identity before replacement
- Check field wiring and mounting requirements
- Do not infer lifecycle facts from age
The 190501-07-00-01 low frequency velocity transducer requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 190501-07-00-01 low frequency velocity transducer must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.4 x 3.4 x 12.7 cm
-
Shipping weight0.15 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 190501-07-00-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which mounting accessory does 07 specify?
It selects the 3/8-24 to 3/8-24 plate stud. Other mounting hardware options in the catalog are separate ordering selections. -
Does this order include a 32-foot cable?
No. Connection option 00 specifies the MIL-C-5015 interface. The table lists 99 as the unit with an included 32-foot cable. -
Can it measure slow fan vibration?
The manufacturer describes cooling tower and air-cooled heat exchanger fan applications with the specified low frequency response. Confirm actual speed and operating-range limits. -
Is it automatically compatible with a 2300 monitor?
No. The reviewed manufacturer low-speed fan application guide does not support 190501 with the 2300. Confirm a documented monitor and sensor combination. -
What mounting torque is specified?
The current datasheet states 4.5 N-m plus or minus 0.6 N-m. Correct mechanical coupling is important for the measured response. -
What does output polarity indicate?
Pin A goes positive relative to pin B when velocity is from the base toward the top of the transducer, as defined in the manufacturer specification.
READY TO VERIFY YOUR PART?
Get a 190501-07-00-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
