PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
125 ft splash-proof interconnect cable for two-wire transducers
Bently Nevada CB2W100-125 is a 125 ft interconnect cable for compatible two-wire transducers. The shielded cable incorporates a splash-proof molded boot and a blunt-cut monitor end, providing the documented cable arrangement for suitable vibration-measurement connections rather than a general-purpose probe extension.
The official length conversion is approximately 38.1 m, and the published cable temperature range is -50 to +200 C. Verify the sensor connection and installation requirements: Bently Nevada specifically advises against using CB2W100 with the 200350 accelerometer because its O-ring does not seal correctly.
The official length conversion is approximately 38.1 m, and the published cable temperature range is -50 to +200 C. Verify the sensor connection and installation requirements: Bently Nevada specifically advises against using CB2W100 with the 200350 accelerometer because its O-ring does not seal correctly.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for CB2W100-125
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · Hydro machinery
Low-frequency vibration signal routing around turbine bearing supports
CB2W100 is listed among interconnect cables for the LFVTS family. Use the cable to carry the supported sensor signal after verifying the particular sensor and interface arrangement. -
02 · Power generation
Two-wire vibration channels for essential power-plant machinery
The 2300 family supports continuous vibration monitoring of essential machinery. This 125 ft cable option is for compatible two-wire transducer connections, subject to sensor sealing and signal-path requirements. -
03 · Water treatment
Sensor-to-monitor cabling for water-treatment machinery vibration monitoring
For a compatible 2300 measurement point, the cable carries the vibration sensor signal to monitoring equipment. Do not select the 200350 accelerometer with this cable because of the documented seal restriction.
Technical specifications for CB2W100-125
-
Product ModelCB2W100-125
-
Product ParametersSplash-proof transducer interconnect cable
-
In stock1 unit
-
ManufacturerBently Nevada
-
Cable length125 ft, approximately 38.1 m
-
Transducer connection classTwo-wire transducer interconnect
-
Conductor size22 AWG (0.382 mm2 as published)
-
ShieldingShielded cable
-
Boot constructionSplash-proof overmolded boot
-
Monitor-end terminationBlunt cut
-
Cable temperature range-50 to +200 C
-
200350 compatibility restrictionNot recommended: O-ring does not form a proper seal
View all additional
Alternative Names
Bently Nevada CB2W100-125
CB2W100 125 ft interconnect cable
CB2W100 38.1 m splash-proof cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
CB2W100 TRANSDUCER INTERCONNECT CABLES
Match the cable to the supported two-wire sensor channel
This cable family is listed for compatible two-wire transducer interconnection. It carries the sensor signal to monitoring equipment and does not itself measure vibration.
The selected length is 125 ft (approximately 38.1 m). The manufacturer describes shielded 22 AWG cable, a splash-proof overmolded boot and a blunt-cut monitor end.
The 2300 documentation advises against using CB2W100 with the 200350 accelerometer because its O-ring does not form a proper seal. Verify the exact sensor and monitor arrangement before installation.
Features:
- Two-wire transducer interconnect
- Verify sensor-end seal compatibility
- Observe individual sensor and monitor ratings
The Bently Nevada CB2W100-125 transducer interconnect cable requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Select the complete cable order number and length against the installed connection and routing. A matching cable family name alone does not confirm an interchangeable assembly.
Preserve the supported transducer connection, shielding and monitor-end termination. The published cable temperature rating is not a rating for every connected component.
No manufacturer lifecycle notice, discontinuation date or direct successor for this exact cable order was verified in the reviewed sources. Do not describe another cable as a drop-in replacement without supporting documentation.
Features:
- Check complete order and route length
- Do not substitute a calibrated proximity extension cable
- No verified direct successor stated
The Bently Nevada CB2W100-125 transducer interconnect cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada CB2W100-125 transducer interconnect cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about CB2W100-125
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How long is CB2W100-125?
The 125 code specifies 125 ft, approximately 38.1 m. -
Can this cable be used with a 200350 accelerometer?
Bently Nevada does not recommend it because the O-ring will not form a proper seal. -
Is the monitor end supplied with terminal lugs?
No. The CB2W100 description specifies a blunt-cut monitor end. -
What temperature range is published for the cable?
The cable range is -50 to +200 C. The connected sensor and installation can impose lower limits. -
Is the cable screened?
Yes. The manufacturer describes a shielded 22 AWG cable with a splash-proof molded boot. -
Is CB2W100 a 3300 XL probe extension cable?
No. It is listed as an interconnect cable for two-wire transducers, not a calibrated 3300 XL probe-extension assembly.
READY TO VERIFY YOUR PART?
Get a CB2W100-125 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
