PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Spring return expansion transducer
Bently Nevada 24765-02-01 is a case expansion transducer assembly with a spring return option. The 24765-02 DC LVDT provides a plus or minus 25.4 millimeter linear range and a 0.404 volt per millimeter scale factor for machine case movement measurement.
The LVDT rod follows thermal movement of the machine casing relative to its foundation, producing a conditioned signal for the compatible monitor. Correct mechanical alignment and the specified electrical load are essential. The standard 24765 ratings must not be replaced with the separate high temperature 135613 specifications.
The LVDT rod follows thermal movement of the machine casing relative to its foundation, producing a conditioned signal for the compatible monitor. Correct mechanical alignment and the specified electrical load are essential. The standard 24765 ratings must not be replaced with the separate high temperature 135613 specifications.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Documented application roles
These applications describe the compatible manufacturer series, not a claim that this exact order is installed in a named project.
-
01 · TURBINES
Startup case growth monitoring
The LVDT follows casing movement relative to the foundation during thermal growth. Its displacement signal supports the compatible case expansion monitor. -
02 · MECHANICAL CONDITION
Sliding foot movement checks
The manufacturer describes dual transducer installations to compare movement on opposite sides of a case. Unequal movement can help identify a jammed sliding foot. -
03 · MACHINE PROTECTION
Case expansion display and alarms
The conditioned case displacement signal is delivered to the documented monitoring system for indication and alarm evaluation. Match the standard LVDT type and electrical load.
Technical specifications for 24765-02-01
-
Product Model24765-02-01
-
Product ParametersSpring return expansion transducer
-
ManufacturerBently Nevada
-
Linear rangePlus or minus 25.4 mm
-
Scale factor0.404 V/mm
-
Spring option01: spring return
-
Input supply24 Vdc, 30 mA minimum
-
Minus 3 dB response15 Hz
-
Output impedance7 kilohms nominal
-
Minimum load resistance100 kilohms
-
Output linearityPlus or minus 0.5% full range
-
Output rippleLess than 1% full scale
-
Operating temperature-18 to +71 degrees C
-
Storage temperature-54 to +93 degrees C
-
LVDT body constructionSeries 400 magnetic stainless steel
View all additional
Alternative Names
24765 02 01
24765-02-01 spring return expansion transducer
Bently Nevada 24765-02-01
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SPRING RETURN EXPANSION TRANSDUCER
Integrating 24765-02-01
Bently Nevada 24765-02-01 is a case expansion transducer assembly with a spring return option. The 24765-02 DC LVDT provides a plus or minus 25.4 millimeter linear range and a 0.404 volt per millimeter scale factor for machine case movement measurement.
The LVDT rod follows thermal movement of the machine casing relative to its foundation, producing a conditioned signal for the compatible monitor. Correct mechanical alignment and the specified electrical load are essential. The standard 24765 ratings must not be replaced with the separate high temperature 135613 specifications.
For this order, verify Plus or minus 25.4 mm; 0.404 V/mm; 01: spring return. Family specifications apply only to the documented component and installation. Check the complete supplied identity before selecting mating equipment.
Features:
- Match the complete ordered configuration
- Use the correct manufacturer documentation
- Keep component and system specifications distinct
The 24765-02-01 spring return expansion transducer requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete 24765-02-01 identity and the documented installation before replacement. Similar appearance, connector size or a shared family name does not establish an unconditional substitute.
The manufacturer describes a dual arrangement to observe differential movement of the case sides and detect a jammed sliding foot. Application design and compatible monitor configuration must be checked.
No exact-order hardware revision, discontinuation date or designated successor was established in the reviewed manufacturer materials. Publication revision K is not a product hardware revision; unverified lifecycle claims are not added.
Features:
- Confirm exact identity before replacement
- Check field wiring and mounting requirements
- Do not infer lifecycle facts from age
The 24765-02-01 spring return expansion transducer requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 24765-02-01 spring return expansion transducer must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26.5 x 11.5 x 9.5 cm
-
Shipping weight1.85 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 24765-02-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What movement range does the 02 option provide?
The 24765-02 specification gives plus or minus 25.4 mm around the null position, a total travel range of 50.8 mm. -
Does this order have spring return?
Yes. The final 01 option specifies spring return; 00 is the separate version without spring return. -
What electrical load is required?
The documented 24765-02 minimum load resistance is 100 kilohms. Check the receiving circuit and the 24 Vdc, 30 mA minimum power requirement. -
Is this a high temperature 135613 transducer?
No. 24765 and 135613 are separately specified. This order uses the standard 24765 operating range of -18 to +71 degrees C. -
How does the assembly detect thermal movement?
The rod moves inside the LVDT as the machine case expands. The electronics condition that displacement into an output signal for display and alarms. -
Why might a turbine use two case expansion channels?
The manufacturer describes a dual arrangement to observe differential movement of the case sides and detect a jammed sliding foot. Application design and compatible monitor configuration must be checked.
READY TO VERIFY YOUR PART?
Get a 24765-02-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
