PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 31000 and 32000 Proximity Probe Housing Assemblie
- 31000-00-00-15-039-01-02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
External proximity probe housing
Bently Nevada 31000-00-00-15-039-01-02 is a proximity probe housing associated with the 31000 probe housing assemblies. It provides access through the machine casing for probe gap adjustment and replacement without machine disassembly. The housing supplies mechanical protection and mounting, not a standalone vibration signal.
The order selects no probe supplied, no probe cable, and 3.9 in nominal penetration. Check the matching standoff adapter, conduit fittings and threaded mounting interface before installing this assembly at the machine case.
The order selects no probe supplied, no probe cable, and 3.9 in nominal penetration. Check the matching standoff adapter, conduit fittings and threaded mounting interface before installing this assembly at the machine case.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 31000-00-00-15-039-01-02 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations. -
02 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production. -
03 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations.
Technical specifications for 31000-00-00-15-039-01-02
-
Product Model31000-00-00-15-039-01-02
-
Product ParametersExternal proximity probe housing
-
In stock5 units
-
ManufacturerBently Nevada
-
Included probeNo probe supplied
-
Probe cable lengthNo probe cable
-
Standoff adapter1.5 in
-
Nominal penetration3.9 in
-
Conduit fittingsOne 3/4-14 NPT fitting and two plugs
-
Outer sleeve thread3/4-14 NPT
-
Housing bodyGlass-reinforced conductive PPS
-
Probe sleeve and chainAISI 304 stainless steel
-
Outer sleeve and exterior screwsAISI 303 stainless steel
-
Housing sealNeoprene O-ring
-
Environmental enclosureType 4X / IP66; not a pressure vessel
-
Retaining nut torque29.4 N m (260 in lb)
-
Penetration adjustment+/-0.5 in (+/-13 mm)
-
Additional sleeve supportRequired when C + D exceeds 305 mm (12 in)
View all additional
Alternative Names
31000 00 00 15 039 01 02
31000-00-00-15-039-01-02 proximity probe housing
Bently Nevada 31000-00-00-15-039-01-02
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
EXTERNAL PROXIMITY PROBE HOUSING
Integrating 31000-00-00-15-039-01-02
It provides access through the machine casing for probe gap adjustment and replacement without machine disassembly. The housing supplies mechanical protection and mounting, not a standalone vibration signal.
The outer sleeve mounts to the machine case before the adjusted probe sleeve and housing body are secured. Tighten the retaining nut to 29.4 N m. Provide support near the probe when combined standoff and penetration exceed 305 mm.
The PPS housing is not explosion-proof and is not a pressure vessel. Intrinsically safe service requires the appropriate approved transducer system and barriers. Keep the machine casing firmly connected to the bearing for relative radial-vibration measurements.
Features:
- Match probe selection, sleeve geometry, conduit fittings and the mounting interface
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 31000-00-00-15-039-01-02 proximity probe housing requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 31000-00-00-15-039-01-02 requires comparing probe selection, sleeve geometry, conduit fittings and the mounting interface. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Compare the metric or English housing options with the installed assembly. These standard PPS housings are not replacements for an explosion-proof enclosure unless the complete installation requirements allow the change.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 31000-00-00-15-039-01-02 proximity probe housing requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 31000-00-00-15-039-01-02 proximity probe housing must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size37x9x8cm
-
Shipping weight1.5 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 31000-00-00-15-039-01-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the function of 31000-00-00-15-039-01-02?
It is an external proximity-probe housing assembly. It provides access through the machine casing for probe gap adjustment and replacement without machine disassembly. The housing supplies mechanical protection and mounting, not a standalone vibration signal. -
Which probe and cable are included in this 31000 configuration?
The order selects no probe supplied, no probe cable, and 3.9 in nominal penetration. Check the matching standoff adapter, conduit fittings and threaded mounting interface before installing this assembly at the machine case. -
How is the housing connected to a measuring channel?
Use the selected compatible probe with its matching extension cable, Proximitor Sensor and monitoring channel. The housing contains no standalone transmitter electronics. -
Where can the housing support machinery monitoring?
The manufacturer lists externally mounted radial-vibration and Keyphasor transducers through the machine case. Correct casing-to-bearing attachment is essential for relative radial-vibration measurements. -
What installation checks are important for the 3.9 in penetration?
The outer sleeve mounts to the machine case before the adjusted probe sleeve and housing body are secured. Tighten the retaining nut to 29.4 N m. Provide support near the probe when combined standoff and penetration exceed 305 mm. -
Does IP66 mean the housing is explosion-proof?
The PPS housing is not explosion-proof and is not a pressure vessel. Intrinsically safe service requires the appropriate approved transducer system and barriers. Keep the machine casing firmly connected to the bearing for relative radial-vibration measurements. -
Can this housing replace an existing assembly without checking its options?
No. Compare probe selection, lead length, standoff, penetration, conduit fittings and mounting thread. The 31000 and 32000 ordering systems use different dimensional units and fitting options. -
Why should a long sleeve be supported near the probe?
The manufacturer calls for additional support when C + D exceeds 305 mm to avoid natural-frequency excitation in the long sleeve. Verify combined geometry, not penetration alone.
READY TO VERIFY YOUR PART?
Get a 31000-00-00-15-039-01-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
