PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 31000 and 32000 Proximity Probe Housing Assemblie
- 31000-28-10-15-040-03-02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
31000-28-10-15-040-03-02 31000 Proximity Probe Housing Assembly
Bently Nevada 31000-28-10-15-040-03-02 Proximity Probe Housing Assembly mounts a proximity probe through a machine case while retaining external service access. Its polyphenylene-sulfide housing, stainless-steel hardware, 3/4-14 NPT mounting interface and specified probe, standoff and penetration options form a sealed installation assembly. The housing lets technicians set probe gap and replace the probe without opening the machine casing. This supports repeatable shaft measurements while protecting the probe connection in industrial environments.
BEFORE YOU BUY
Confirm the complete 31000 Proximity Probe Housing Assembly
ACTUAL APPLICATIONS
Verified application context for 31000-28-10-15-040-03-02
Manufacturer documentation supports these equipment applications when the complete system configuration and interfaces are verified.
-
01 · AUTOMOTIVE
Powertrain Test and Machining Adjustable Probe Installation Assemblies
Automotive Production Equipment Sensor Mounting SystemsEngine dynamometer shafts probe housingsTransmission machining spindles probe conduit assemblies -
02 · MINING & METALS
Grinding and Crushing Adjustable Probe Installation Assemblies
Mineral Processing Machinery Sensor Mounting SystemsGrinding mill pinion bearings probe housingsPrimary crusher drive shafts probe conduit assemblies -
03 · GENERAL MANUFACTURING
Machine Test and Precision Spindle Adjustable Probe Installation Assemblies
Factory Production Equipment Sensor Mounting SystemsDynamometer test stand shafts probe housingsMachining spindle bearing assemblies probe conduit assemblies
Technical specifications for 31000-28-10-15-040-03-02
-
Product Model31000-28-10-15-040-03-02
-
Product Parameters31000 Proximity Probe Housing Assembly
-
In stock1 unit
-
ManufacturerBently Nevada
-
Housing Series31000 English
-
Probe Option3300 XL 8 mm with multiple approvals
-
Probe Cable Length1.0 m
-
Standoff Adapter1.5 in
-
Probe Penetration4.0 in
-
Fittings OptionEnglish fitting set 03
-
Mounting Thread3/4-14 NPT
-
Enclosure RatingNEMA 4X and IP66
-
Housing MaterialPolyphenylene sulfide
-
Typical Weight1.2 kg
-
Probe Pressure LimitDifferential seal assembly
-
Impact Resistance7 joules
View all additional
Alternative Names
31000 28 10 15 040 03 02
Bently Nevada proximity probe housing assembly
31000 and 32000 proximity probe housings proximity probe housing assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 31000-28-10-15-040-03-02 to the installed 31000 and 32000 proximity probe housings
Bently Nevada 31000-28-10-15-040-03-02 is a proximity probe housing assembly for the 31000 and 32000 proximity probe housings. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare standoff adapter (1.5 in), probe penetration (4.0 in) and fittings option (English fitting set 03) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 31000-28-10-15-040-03-02
- Product class: proximity probe housing assembly
- Family: 31000 and 32000 proximity probe housings
The Bently Nevada 31000-28-10-15-040-03-02 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 31000-28-10-15-040-03-02 identity before exchange
Replace 31000-28-10-15-040-03-02 only after matching the complete article code, proximity probe housing assembly, installed 31000 and 32000 proximity probe housings role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 31000-28-10-15-040-03-02
- Product class: proximity probe housing assembly
- Family check: 31000 and 32000 proximity probe housings
The Bently Nevada 31000-28-10-15-040-03-02 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Official Bently Nevada 31000-28-10-15-040-03-02 product documentation is checked before order
- Confirm 31000 Proximity Probe Housing System configuration in current manuals
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 31000-28-10-15-040-03-02 31000 Proximity Probe Housing Assembly must match the installed 31000 Proximity Probe Housing System; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size18.0 × 15.0 × 15.0 cm
-
Shipping weight1.20 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 31000-28-10-15-040-03-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should 31000-28-10-15-040-03-02 be identified for quotation?
Use the complete 31000-28-10-15-040-03-02 marking, quantity and clear nameplate photographs. -
Which system details must be matched for 31000-28-10-15-040-03-02?
Confirm the installed 31000 and 32000 proximity probe housings, mating hardware, signal interface and required approvals. -
What should incoming inspection cover?
Inspect the proximity probe housing assembly label, housing, cable, connector and transport condition before installation. -
Can a related part number replace 31000-28-10-15-040-03-02?
Do not assume interchangeability; compare every order-code field, rating and physical interface. -
Which records should be captured before removal?
Record the machine location, cable routing, connector orientation, channel configuration and current gap or bias value. -
How should the replacement be commissioned?
Restore the documented mounting and wiring, then verify signal quality, alarms and channel behavior under controlled conditions. -
Which documents should remain with the asset record?
Retain the nameplate images, installation record, configuration backup, test results and acceptance evidence. -
What is the role of 31000-28-10-15-040-03-02?
The proximity probe housing assembly performs its documented measurement or signal function within the matched 31000 and 32000 proximity probe housings.
READY TO VERIFY YOUR PART?
Get a 31000-28-10-15-040-03-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
31000-28-10-15-040-03-0231000 Proximity Probe Housing AssemblyManufacturer: Bently NevadaView Details
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
