PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 System
- 3300/20-12-01-01-00-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Dual thrust position monitor
Bently Nevada 3300/20-12-01-01-00-00 is a dual thrust position monitor. It measures two channels of shaft axial position for early warning of thrust-bearing problems. Measurements come from proximity-probe gap signals referenced to machine clearances. Correct probe range, adjustment and alarm voting are essential because transducer faults can resemble position changes.
This order selects a 1.0-0-1.0 mm axial-position scale and the 3300 or 7200 Proximitor systems, 200 mV/mil input arrangement. The relay and approval options must match the installed rack. Check probe adjustment, measured thrust direction and the required voting logic before replacement or commissioning.
This order selects a 1.0-0-1.0 mm axial-position scale and the 3300 or 7200 Proximitor systems, 200 mV/mil input arrangement. The relay and approval options must match the installed rack. Check probe adjustment, measured thrust direction and the required voting logic before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 3300/20-12-01-01-00-00 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants. -
02 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. -
03 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants.
Technical specifications for 3300/20-12-01-01-00-00
-
Product Model3300/20-12-01-01-00-00
-
Spare Model3300/20
-
Product ParametersDual thrust position monitor
-
In stock9 units
-
ManufacturerBently Nevada
-
Configured axial range1.0-0-1.0 mm
-
Ordered transducer input3300 or 7200 Proximitor systems, 200 mV/mil
-
Input impedance10 kohm
-
Nominal power consumption1.5 W
-
Conditioning accuracy at +25 deg CTypical +/-0.33%, maximum +/-1% of full scale
-
Independent recorder formats4-20 mA, 0 to -10 Vdc, or +1 to +5 Vdc per channel
-
Recorder current load0 to 600 ohm at 4-20 mA
-
Buffered transducer connectionsOne front coaxial and one rear terminal per channel
-
Alarm directionBidirectional Alert and Danger
-
Recommended thrust votingTwo-out-of-two AND voting with two probes on the same collar or shaft
-
Display63-segment LCD per channel with separate center gap scale
-
Rack occupancyOne monitor position, excluding positions 1 and 2
-
Selected relaysDual epoxy-sealed
-
Ordered approvalNot requested
-
Safety barrier optionNone requested
View all additional
Alternative Names
3300/20 12 01 01 00 00
3300/20-12-01-01-00-00 dual thrust position monitor
Bently Nevada 3300/20-12-01-01-00-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DUAL THRUST POSITION MONITOR
Integrating 3300/20-12-01-01-00-00
It measures two channels of shaft axial position for early warning of thrust-bearing problems. Measurements come from proximity-probe gap signals referenced to machine clearances. Correct probe range, adjustment and alarm voting are essential because transducer faults can resemble position changes.
Match the ordered sensitivity and transducer family. The historical table excludes 3300 XL 11 mm from its ordinary 7200 11 mm input option and specifies modification 146300-01 for that XL application. Similar probe diameter is not sufficient evidence of compatibility.
Use two properly adjusted proximity probes observing the same collar or shaft and follow the manufacturer strongly recommended AND voting arrangement. Incorrect probe adjustment can prevent an alarm. Preserve the applicable wiring, shields, transducer supply and machine-approved alarm settings.
Features:
- Match complete order, installed input and output configuration, wiring and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 3300/20-12-01-01-00-00 dual thrust position monitor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 3300/20-12-01-01-00-00 requires comparing complete order, installed input and output configuration, wiring and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Match the ordered sensitivity and transducer family. The historical table excludes 3300 XL 11 mm from its ordinary 7200 11 mm input option and specifies modification 146300-01 for that XL application. Similar probe diameter is not sufficient evidence of compatibility.
A 2011 manufacturer notice placed 3300 monitors in Phase 4, with repair dependent on component availability, and estimated Phase 5 for January 2014. That estimate is not a verified exact-order discontinuation date. The notice excludes 3300 I/O modules; no unconditional modern successor is assigned.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 3300/20-12-01-01-00-00 dual thrust position monitor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 3300/20-12-01-01-00-00 dual thrust position monitor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size5.1 cm x 20.3 cm x 30.5 cm
-
Shipping weight1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3300/20-12-01-01-00-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 3300/20-12-01-01-00-00 identified?
This order selects a 1.0-0-1.0 mm axial-position scale and the 3300 or 7200 Proximitor systems, 200 mV/mil input arrangement. The relay and approval options must match the installed rack. Check probe adjustment, measured thrust direction and the required voting logic before replacement or commissioning. -
What is the function of this component?
It measures two channels of shaft axial position for early warning of thrust-bearing problems. Measurements come from proximity-probe gap signals referenced to machine clearances. Correct probe range, adjustment and alarm voting are essential because transducer faults can resemble position changes. -
Which equipment and settings must match?
Match the ordered sensitivity and transducer family. The historical table excludes 3300 XL 11 mm from its ordinary 7200 11 mm input option and specifies modification 146300-01 for that XL application. Similar probe diameter is not sufficient evidence of compatibility. -
What application does it support?
Two probe channels observe the shaft or thrust collar to indicate axial position relative to the available bearing clearance. The monitor is selected and adjusted for the actual machine geometry. -
What should be checked during installation?
Use two properly adjusted proximity probes observing the same collar or shaft and follow the manufacturer strongly recommended AND voting arrangement. Incorrect probe adjustment can prevent an alarm. Preserve the applicable wiring, shields, transducer supply and machine-approved alarm settings. -
Can quad relays perform the recommended AND voting internally?
No. The ordering notes state that AND voting is unavailable internally with quad relays. The programmable-options note requires external series-contact wiring for that arrangement; quad relays are also unavailable with internal barriers. -
Can a probe fault appear as a thrust-position alarm?
Yes. Since the measurement uses probe gap voltage, an out-of-range transducer can resemble axial movement. Correctly installed dual probes and the documented AND voting reduce that risk; probe range and adjustment remain essential.
READY TO VERIFY YOUR PART?
Get a 3300/20-12-01-01-00-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
