PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Dual epoxy relay module
Bently Nevada 82926-01 is a dual epoxy relay module. The relay assembly interfaces monitor alarms with external annunciation or shutdown equipment. Its contacts respond to the configured Alert and Danger functions rather than measuring vibration directly. The installed circuit must match the selected relay operating state, load and monitoring-system configuration.
The eccentricity-monitor spares table identifies this number as a dual epoxy relay assembly. It is not the hermetically sealed or quad-relay version. Confirm the host monitor and any common-relay configuration before replacement; generic contact ratings do not establish hazardous-area approval for an installation.
The eccentricity-monitor spares table identifies this number as a dual epoxy relay assembly. It is not the hermetically sealed or quad-relay version. Confirm the host monitor and any common-relay configuration before replacement; generic contact ratings do not establish hazardous-area approval for an installation.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 82926-01 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production. -
02 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations. -
03 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants.
Technical specifications for 82926-01
-
Product Model82926-01
-
Product ParametersDual epoxy relay module
-
In stock2 units
-
ManufacturerBently Nevada
-
Documented spare roleDual epoxy relay module for 3300/40
-
Relay allocationOne Alert and one Danger relay
-
Contact arrangementDouble-pole, double-throw
-
DC resistive-load rating5 A at 28 Vdc
-
AC resistive-load rating5 A at 120/220 Vac, 50/60 Hz; approvals may reduce this
-
Minimum specified load10 mA at 5 Vdc
-
Minimum rated-load contact life10,000 cycles
-
Arc suppressionInstalled as standard
-
Coil operating selectionJumper selectable normally energized or de-energized
-
Installed positionBehind the matching monitor
-
Common relay operationSelectable Alert or Danger bus 1 or 2, subject to monitor grouping
View all additional
Alternative Names
82926 01
82926-01 dual epoxy relay module
Bently Nevada 82926-01
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DUAL EPOXY RELAY MODULE
Integrating 82926-01
The relay assembly interfaces monitor alarms with external annunciation or shutdown equipment. Its contacts respond to the configured Alert and Danger functions rather than measuring vibration directly. The installed circuit must match the selected relay operating state, load and monitoring-system configuration.
The 3300/40 data sheet explicitly lists 82926-01 as its dual epoxy relay spare. The 3300 relay document distinguishes dual DPDT contacts from quad SPDT contacts. Match the installed monitor and rear assembly; do not substitute versions solely because their mechanical arrangement looks similar.
Use the manufacturer relay-wiring diagrams and verify the normally energized or de-energized jumper setting. Confirm contact loading and common-bus grouping before service. Systems with individual relays should not also connect those relays to common buses; hazardous-area installations have separate contact restrictions.
Features:
- Match complete order, installed input and output configuration, wiring and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 82926-01 dual epoxy relay module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 82926-01 requires comparing complete order, installed input and output configuration, wiring and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The 3300/40 data sheet explicitly lists 82926-01 as its dual epoxy relay spare. The 3300 relay document distinguishes dual DPDT contacts from quad SPDT contacts. Match the installed monitor and rear assembly; do not substitute versions solely because their mechanical arrangement looks similar.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 82926-01 dual epoxy relay module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 82926-01 dual epoxy relay module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 82926-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 82926-01 identified?
The eccentricity-monitor spares table identifies this number as a dual epoxy relay assembly. It is not the hermetically sealed or quad-relay version. Confirm the host monitor and any common-relay configuration before replacement; generic contact ratings do not establish hazardous-area approval for an installation. -
What is the function of this component?
The relay assembly interfaces monitor alarms with external annunciation or shutdown equipment. Its contacts respond to the configured Alert and Danger functions rather than measuring vibration directly. The installed circuit must match the selected relay operating state, load and monitoring-system configuration. -
Which equipment and settings must match?
The 3300/40 data sheet explicitly lists 82926-01 as its dual epoxy relay spare. The 3300 relay document distinguishes dual DPDT contacts from quad SPDT contacts. Match the installed monitor and rear assembly; do not substitute versions solely because their mechanical arrangement looks similar. -
What application does it support?
The original relay documentation describes external alarm annunciation. The Alert and Danger contacts convey monitor alarm states to the external circuit; this assembly does not independently evaluate a transducer signal. -
What should be checked during installation?
Use the manufacturer relay-wiring diagrams and verify the normally energized or de-energized jumper setting. Confirm contact loading and common-bus grouping before service. Systems with individual relays should not also connect those relays to common buses; hazardous-area installations have separate contact restrictions. -
Can the ordinary 220 Vac contact rating be used for every approved installation?
No. The relay document lists separate restrictions: its ATEX resistive AC rating is 5 A at 30 Vac, and its CSA epoxy rating is 5 A at 120 Vac. Confirm the actual system approval and applicable controlled documentation. -
Does normally energized mean the same thing as normally closed?
No. The manufacturer diagrams distinguish the coil operating condition from the NC, ARM and NO contact terminals. Verify both the selected coil state and the circuit terminal connections; either description alone is insufficient. -
Is an epoxy-sealed relay the same as the hermetic version?
No. The manufacturer assigns epoxy and hermetic versions different environmental use and contact-load requirements. The spare number in the 3300/40 table identifies the epoxy version; it must not be represented as the hermetic spare.
READY TO VERIFY YOUR PART?
Get a 82926-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
