PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Accelerometer input monitoring module
Bently Nevada 3300/25 is an accelerometer input monitor. It processes accelerometer signals for machinery monitoring, using filtering and acceleration or integrated velocity indication. The family supports two independent inputs or separate processing of one transducer. Channel units, filtering, relay options and board applicability must match the installed version.
The base designation does not select input mode, channel scales, relays, barriers or trip multiplication. The operation manual covers specified main and filter board families. Match the complete identification decal and installed boards before applying its configuration procedures or ordering replacement parts.
The base designation does not select input mode, channel scales, relays, barriers or trip multiplication. The operation manual covers specified main and filter board families. Match the complete identification decal and installed boards before applying its configuration procedures or ordering replacement parts.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 3300/25 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. -
02 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants. -
03 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations.
Technical specifications for 3300/25
-
Product Model3300/25
-
Product ParametersAccelerometer input monitoring module
-
In stock7 units
-
ManufacturerBently Nevada
-
Accelerometer input sensitivity100 mV/g
-
Signal filteringProgrammable high-pass, low-pass and band-pass
-
Recorder output formats0 to -10 Vdc, +1 to +5 Vdc, or 4-20 mA
-
Buffered signal unitsSame as the configured channel display units
-
Self-test levelsPower-up, cyclic and user-invoked
-
First Out indicationsIndependent Alert and Danger
-
Alarm reset behaviorSelectable latching or nonlatching
-
Timed OK recoverySignal within OK limits for 30 seconds before recovery
-
Timed OK dependencyNonlatching OK mode required
-
Internal diagnostics indicationOK LED flashes at 5 Hz for stored cyclic-test errors
-
Single-transducer modeBoth channels can process one input differently
-
Trip Multiply selections2X or 3X through external contact, selected configuration
-
Selectable alarm delays0.1, 1, 3 or 6 seconds
-
Quad-relay voting limitAND voting requires external series contacts
-
Meter scale requirementScale units must match configured channel full scale
View all additional
Alternative Names
3300/25
3300/25 accelerometer input monitor
Bently Nevada 3300/25
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ACCELEROMETER INPUT MONITORING MODULE
Integrating 3300/25
It processes accelerometer signals for machinery monitoring, using filtering and acceleration or integrated velocity indication. The family supports two independent inputs or separate processing of one transducer. Channel units, filtering, relay options and board applicability must match the installed version.
Use the documented 100 mV/g accelerometer input and match channel units, full-scale ranges and filter configuration. The guide applies to specified main and filter board families, not every unidentified assembly. Integrated low-frequency signals can saturate the monitor; filtering and gain require configuration-specific review.
The operation guide warns of improper rack operation during removal or installation and calls for powering down the rack or inhibiting rack alarms under the applicable maintenance procedure. Removing the rear signal-input relay module removes its machinery protection. Do not touch exposed energized terminals.
Features:
- Match complete order, installed input and output configuration, wiring and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 3300/25 accelerometer input monitor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 3300/25 requires comparing complete order, installed input and output configuration, wiring and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the documented 100 mV/g accelerometer input and match channel units, full-scale ranges and filter configuration. The guide applies to specified main and filter board families, not every unidentified assembly. Integrated low-frequency signals can saturate the monitor; filtering and gain require configuration-specific review.
A 2011 manufacturer notice placed 3300 monitors in Phase 4, with repair dependent on component availability, and estimated Phase 5 for January 2014. That estimate is not a verified exact-order discontinuation date. The notice excludes 3300 I/O modules; no unconditional modern successor is assigned.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 3300/25 accelerometer input monitor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 3300/25 accelerometer input monitor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size6x20x33.0cm
-
Shipping weight1.13 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3300/25
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 3300/25 identified?
The base designation does not select input mode, channel scales, relays, barriers or trip multiplication. The operation manual covers specified main and filter board families. Match the complete identification decal and installed boards before applying its configuration procedures or ordering replacement parts. -
What is the function of this component?
It processes accelerometer signals for machinery monitoring, using filtering and acceleration or integrated velocity indication. The family supports two independent inputs or separate processing of one transducer. Channel units, filtering, relay options and board applicability must match the installed version. -
Which equipment and settings must match?
Use the documented 100 mV/g accelerometer input and match channel units, full-scale ranges and filter configuration. The guide applies to specified main and filter board families, not every unidentified assembly. Integrated low-frequency signals can saturate the monitor; filtering and gain require configuration-specific review. -
What application does it support?
The manufacturer identifies gearboxes among high-frequency accelerometer applications. Configured filtering selects the frequency components or ranges required by the machine-monitoring plan. -
What should be checked during installation?
The operation guide warns of improper rack operation during removal or installation and calls for powering down the rack or inhibiting rack alarms under the applicable maintenance procedure. Removing the rear signal-input relay module removes its machinery protection. Do not touch exposed energized terminals. -
Can any filter board use the same low-pass frequency table?
No. The manual gives different tables for filter boards 79562-01 / 105521-01 and 148921-01. Identify the installed board and apply its own configuration table; do not transfer a setting solely from the 3300/25 name. -
Can the quad-relay option include internal barriers and internal AND voting?
No. Quad relays are not available with internal barriers. Their AND voting requires external series-contact wiring, and the OR relay-bus option is unavailable. Use the applicable approved installation procedure rather than assuming a dual-relay arrangement.
READY TO VERIFY YOUR PART?
Get a 3300/25 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
