PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 System
- 330105-02-12-05-02-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
330105-02-12-05-02-00 Imperial reverse mount probe
Bently Nevada 330105-02-12-05-02-00 is a Imperial reverse mount probe in the 3300 XL 8 mm proximity transducer systems. It is used to detect the specified process or machine condition and provide the corresponding signal.
Its documented configuration includes mounting arrangement of Reverse mount, case thread of 3/8-24 UNF, case length of 1.2 in, and unthreaded section of 0.2 in. During operation, the Imperial reverse mount probe detects the target condition and converts it into the specified electrical or digital signal.
Its documented configuration includes mounting arrangement of Reverse mount, case thread of 3/8-24 UNF, case length of 1.2 in, and unthreaded section of 0.2 in. During operation, the Imperial reverse mount probe detects the target condition and converts it into the specified electrical or digital signal.
BEFORE YOU BUY
Confirm the complete Imperial reverse mount probe
ACTUAL APPLICATIONS
Where 330105-02-12-05-02-00 Fits Across Major Industry Sectors
Uses span power, oil and gas and metals, subject to verified compatibility, operating conditions and project requirements.
-
01 · POWER GENERATION
Combined-Cycle Generation and Pumped-Storage Energy Production
Combined-cycle electricity production serving utility and industrial energy demand.Pumped-storage hydropower operation for electricity storage and peak demand. -
02 · OIL & GAS
Natural Gas Processing and Liquefied Gas Production
Natural gas processing for commercial energy and industrial markets.Liquefied natural gas production and handling across energy operations. -
03 · METALS & STEEL
Primary Steel Production and Rolled Metal Manufacturing
Primary steel production serving construction and industrial manufacturing markets.Metal rolling and forming for industrial material supply chains.
Technical specifications for 330105-02-12-05-02-00
-
Product Model330105-02-12-05-02-00
-
Product ParametersImperial reverse mount probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting arrangementReverse mount
-
Case thread3/8-24 UNF
-
Case length1.2 in
-
Unthreaded section0.2 in
-
Integral cable length0.5 m
-
ConnectorMiniature ClickLoc; standard cable
-
Lead protectionNo armor or connector protector option
-
Approval selection00: not required
-
Tip materialPolyphenylene sulfide
-
Case materialAISI 303 or 304 stainless steel
-
Cable construction75-ohm triaxial cable, FEP insulation
-
Recommended case torque7.5 N-m; maximum 22.6 N-m
View all additional
Alternative Names
330105-02-12-05-02-00 imperial reverse mount probe
Imperial reverse mount probe for Bently Nevada 330105-02-12-05-02-00
330105 02 12 05 02 00 Bently Nevada
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 330105-02-12-05-02-00 to the installed 3300 XL 8 mm proximity transducer systems
Bently Nevada 330105-02-12-05-02-00 is a Imperial reverse mount probe for the 3300 XL 8 mm proximity transducer systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare unthreaded section (0.2 in), integral cable length (0.5 m) and connector (Miniature ClickLoc; standard cable) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 330105-02-12-05-02-00
- Product class: Imperial reverse mount probe
- Family: 3300 XL 8 mm proximity transducer systems
The Bently Nevada 330105-02-12-05-02-00 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 330105-02-12-05-02-00 identity before exchange
Replace 330105-02-12-05-02-00 only after matching the complete article code, Imperial reverse mount probe, installed 3300 XL 8 mm proximity transducer systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 330105-02-12-05-02-00
- Product class: Imperial reverse mount probe
- Family check: 3300 XL 8 mm proximity transducer systems
The Bently Nevada 330105-02-12-05-02-00 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 330105-02-12-05-02-00
- Bently Nevada 3300 XL 8 mm proximity transducer systems references reviewed
- Exact Bently Nevada identity required before service
Documentation for Bently Nevada 330105-02-12-05-02-00 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.4x22.2x3.7cm
-
Shipping weight0.08 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330105-02-12-05-02-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which mounting thread does 330105-02-12-05-02-00 use?
It uses 3/8-24 UNF, with a 1.2 in case and 0.2 in unthreaded section. Check the reverse mount drawing rather than the forward mount dimensions. -
Does the reverse mount version include armored cable?
No. The manufacturer states that reverse mount probes do not offer armor or connector protector options. -
How long is the integral probe lead?
The 05 length option selects 0.5 m. The extension cable and Proximitor must complete the selected system electrical length. -
What torque is specified for the reverse mount case?
The datasheet gives 7.5 N-m recommended and 22.6 N-m maximum. Follow the mounting arrangement and avoid loading the cable connection. -
Does the final 00 suffix establish hazardous area approval?
No. The manufacturer ordering table identifies 00 as approvals not required. Do not apply the 05 approval selection to this order. -
Can an older non-XL component be mixed into the channel?
Documented XL and non-XL combinations are limited to non-XL performance. Matching the connector alone does not establish the complete channel specification.
READY TO VERIFY YOUR PART?
Get a 330105-02-12-05-02-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
