PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Proximitor DIN mounting pad
Bently Nevada 138493-01 is a DIN-mount mounting pad. The mounting pad is a mechanical replacement accessory for the DIN-mounted Proximitor arrangement. It supports the documented sensor mounting method rather than measuring vibration or conditioning a probe signal. Select it against the installed mounting hardware, not sensor appearance alone.
The manufacturer lists 138493-01 as the replacement DIN-mount mounting pad. Its separately listed panel-mount pad has a different part number. Confirm the installed Proximitor mounting selection and supporting hardware before ordering; the pad does not include a complete transducer system.
The manufacturer lists 138493-01 as the replacement DIN-mount mounting pad. Its separately listed panel-mount pad has a different part number. Confirm the installed Proximitor mounting selection and supporting hardware before ordering; the pad does not include a complete transducer system.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 138493-01 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations. -
02 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants. -
03 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities.
Technical specifications for 138493-01
-
Product Model138493-01
-
Product ParametersProximitor DIN mounting pad
-
In stock8 units
-
ManufacturerBently Nevada
-
Documented functionReplacement mounting pad
-
Mounting arrangementDIN mount
-
Intended equipment3300 XL Proximitor Sensor
View all additional
Alternative Names
138493 01
138493-01 DIN-mount mounting pad
Bently Nevada 138493-01
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
PROXIMITOR DIN MOUNTING PAD
Integrating 138493-01
The mounting pad is a mechanical replacement accessory for the DIN-mounted Proximitor arrangement. It supports the documented sensor mounting method rather than measuring vibration or conditioning a probe signal. Select it against the installed mounting hardware, not sensor appearance alone.
Use the documented DIN-mounted 3300 XL Proximitor arrangement. The manufacturer separately identifies 138492-01 for panel mounting. These descriptions are different mounting selections, not proof that either pad can directly replace the other.
Identify the sensor mounting option before replacing the pad. Follow the 3300 XL transducer system manual for the sensor installation and insulating mounting arrangement; do not infer a mounting torque or a pad material from the sensor housing specification.
Features:
- Match exact spare identity, complete installed system and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 138493-01 DIN-mount mounting pad requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 138493-01 requires comparing exact spare identity, complete installed system and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the documented DIN-mounted 3300 XL Proximitor arrangement. The manufacturer separately identifies 138492-01 for panel mounting. These descriptions are different mounting selections, not proof that either pad can directly replace the other.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 138493-01 DIN-mount mounting pad requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 138493-01 DIN-mount mounting pad must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size1.4x5.5x8.5cm
-
Shipping weight0.04 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 138493-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does 138493-01 identify?
The manufacturer lists 138493-01 as the replacement DIN-mount mounting pad. Its separately listed panel-mount pad has a different part number. Confirm the installed Proximitor mounting selection and supporting hardware before ordering; the pad does not include a complete transducer system. -
What is the function of this component?
The mounting pad is a mechanical replacement accessory for the DIN-mounted Proximitor arrangement. It supports the documented sensor mounting method rather than measuring vibration or conditioning a probe signal. Select it against the installed mounting hardware, not sensor appearance alone. -
Which equipment is compatible?
Use the documented DIN-mounted 3300 XL Proximitor arrangement. The manufacturer separately identifies 138492-01 for panel mounting. These descriptions are different mounting selections, not proof that either pad can directly replace the other. -
Where is this component used?
The pad supports the documented DIN-mounted Proximitor arrangement in a compatible sensing installation. It supplies mechanical mounting rather than signal processing. -
What matters during installation?
Identify the sensor mounting option before replacing the pad. Follow the 3300 XL transducer system manual for the sensor installation and insulating mounting arrangement; do not infer a mounting torque or a pad material from the sensor housing specification. -
Is this the same spare as 138492-01?
No. The official accessory list calls 138493-01 the DIN-mount pad and 138492-01 the panel-mount pad. Preserve the actual sensor mounting selection. -
Does the pad determine calibrated electrical length?
No. It is mounting hardware. The probe, extension cable and Proximitor Sensor must still form the documented calibrated sensing chain.
READY TO VERIFY YOUR PART?
Get a 138493-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
