PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330105-02-12-90-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Reverse mount proximity probe
Bently Nevada 330105-02-12-90-02-05 is a reverse-mount proximity probe. The probe measures conductive-target position without physical contact. Used with the matching extension cable and Proximitor Sensor, the complete chain supports static-position and dynamic-vibration measurements on fluid-film-bearing machinery, subject to the specified calibration and installation limits.
Its total probe length is 9 m. Standard cable without connector protector. Check the complete thread, lead, connector and approval selections against the installed sensing chain. Unresolved ordering fields or factory modifications must be confirmed before a replacement is selected.
Its total probe length is 9 m. Standard cable without connector protector. Check the complete thread, lead, connector and approval selections against the installed sensing chain. Unresolved ordering fields or factory modifications must be confirmed before a replacement is selected.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3300 XL 8 mm proximity transducer system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · RADIAL VIBRATION
Fluid-film bearing monitoring
The compatible probe senses dynamic shaft movement relative to the bearing. Its matched cable and Proximitor Sensor supply the measurement used by the configured vibration-monitoring channel. -
02 · STATIC POSITION
Conductive-target position measurement
The sensing chain converts probe-to-target distance into a position-related voltage. Select the mechanical mounting and calibrated electrical length for the actual target; probe lead length is not the field-wire run. -
03 · PHASE REFERENCE
Keyphasor and speed measurement
The manufacturer lists phase-reference and speed measurement for this family. Use the correctly configured measuring channel and target geometry; overspeed protection requires its separate application guidance.
Technical specifications for 330105-02-12-90-02-05
-
Product Model330105-02-12-90-02-05
-
Product ParametersReverse mount proximity probe
-
In stock4 units
-
ManufacturerBently Nevada
-
Probe mountingReverse mount
-
Case thread3/8-24 UNF
-
Armor selectionWithout armor
-
Total probe length9 m
-
Cable and connector optionStandard cable without connector protector
-
Agency approval optionCSA, ATEX and IECEx option; verify delivered certificate
-
Case materialAISI 303 or 304 stainless steel
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe cable construction75 ohm triaxial cable
-
Probe cable insulationFEP
-
Probe operating and storage range-52 to +177 deg C
-
Recommended mounting torque7.5 N m
-
Connector materialGold-plated brass or beryllium copper
View all additional
Alternative Names
330105-02-12-90-02-05 reverse-mount proximity probe
3300 XL 8 mm proximity transducer system 330105-02-12-90-02-05
Bently Nevada 330105 02 12 90 02 05
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
REVERSE MOUNT PROXIMITY PROBE
Integrating 330105-02-12-90-02-05
The probe measures conductive-target position without physical contact. Used with the matching extension cable and Proximitor Sensor, the complete chain supports static-position and dynamic-vibration measurements on fluid-film-bearing machinery, subject to the specified calibration and installation limits.
Use the matching 3300 XL 8 mm Proximitor Sensor and calibrated probe/cable length. Mixed XL and non-XL 3300 5 mm or 8 mm systems are limited to non-XL performance. A five-metre probe requires a five-metre sensor; the three-metre option, where listed, requires a nine-metre sensor.
Secure the reverse-mount probe using its documented 3/8-24 UNF interface and 7.5 N m recommended torque. Set the target gap according to the transducer installation instructions, and protect the connector and cable from contamination and mechanical damage.
Features:
- Match complete ordering options, electrical length, mounting and the installed measuring chain
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330105-02-12-90-02-05 reverse-mount proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330105-02-12-90-02-05 requires comparing complete ordering options, electrical length, mounting and the installed measuring chain. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the matching 3300 XL 8 mm Proximitor Sensor and calibrated probe/cable length. Mixed XL and non-XL 3300 5 mm or 8 mm systems are limited to non-XL performance. A five-metre probe requires a five-metre sensor; the three-metre option, where listed, requires a nine-metre sensor.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330105-02-12-90-02-05 reverse-mount proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330105-02-12-90-02-05 reverse-mount proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20x19x2cm
-
Shipping weight0.3 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330105-02-12-90-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 330105-02-12-90-02-05 identified?
330105-02-12-90-02-05 is a reverse-mount proximity probe. Its total probe length is 9 m. Standard cable without connector protector. Check the complete thread, lead, connector and approval selections against the installed sensing chain. Unresolved ordering fields or factory modifications must be confirmed before a replacement is selected. -
What is the function of this reverse-mount proximity probe?
The probe measures conductive-target position without physical contact. Used with the matching extension cable and Proximitor Sensor, the complete chain supports static-position and dynamic-vibration measurements on fluid-film-bearing machinery, subject to the specified calibration and installation limits. -
Which components are compatible with 330105-02-12-90-02-05?
Use the matching 3300 XL 8 mm Proximitor Sensor and calibrated probe/cable length. Mixed XL and non-XL 3300 5 mm or 8 mm systems are limited to non-XL performance. A five-metre probe requires a five-metre sensor; the three-metre option, where listed, requires a nine-metre sensor. -
Where is this product family used?
The manufacturer lists phase-reference and speed measurement for this family. Use the correctly configured measuring channel and target geometry; overspeed protection requires its separate application guidance. -
How should the 3/8-24 UNF probe be mounted?
Secure the reverse-mount probe using its documented 3/8-24 UNF interface and 7.5 N m recommended torque. Set the target gap according to the transducer installation instructions, and protect the connector and cable from contamination and mechanical damage. -
Is this probe pressure-tested before shipment?
The manufacturer states that 3300 XL 8 mm probes are not pressure-tested before shipment. If a pressure-seal test is required for the application, confirm that requirement separately. The user remains responsible for safe containment of process liquids and gases. -
Should the probe-to-extension connection have environmental protection?
The manufacturer recommends connector protectors for increased environmental protection. Supplied silicone tape can be used in documented circumstances, but it is not recommended where the connection will be exposed to turbine oil.
READY TO VERIFY YOUR PART?
Get a 330105-02-12-90-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
