PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330101-00-10-10-01-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3300 XL 8 mm standard-mount proximity probe without armor
Bently Nevada 330101-00-10-10-01-05 combines a one-inch threaded case with a one-metre total probe length for 3300 XL 8 mm proximity measurements. This unarmored configuration includes standard cable, a miniature coaxial ClickLoc connector and its specified connector protector.
A compatible Proximitor sensor converts the probe's response to a conductive target into the system measurement signal. Before installation, verify the required electrical length, mounting clearance and approval conditions; the matching numerical length fields describe different dimensions and must not be interchanged.
A compatible Proximitor sensor converts the probe's response to a conductive target into the system measurement signal. Before installation, verify the required electrical length, mounting clearance and approval conditions; the matching numerical length fields describe different dimensions and must not be interchanged.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330101-00-10-10-01-05
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · SHAFT POSITION
Static position sensing on machinery
The probe participates in a transducer channel that measures distance to a conductive surface. Engineers select the mounting and gap to follow machine position within the configured system's documented measurement range. -
02 · BEARING MONITORING
Fluid-film bearing vibration channels
A correctly paired 3300 XL system uses this probe type to observe radial shaft vibration without contacting the shaft. Target size and separation from other probes must be checked at the actual measurement location. -
03 · SPEED REFERENCE
Rotational reference measurement
The manufacturer lists Keyphasor reference and speed measurements among the family's primary uses. A proposed tachometer or overspeed channel must follow the dedicated Bently Nevada application guidance and the monitoring system's requirements.
Technical specifications for 330101-00-10-10-01-05
-
Product Model330101-00-10-10-01-05
-
Product ParametersUnarmored proximity sensing probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting thread3/8-24 UNF-2A
-
Unthreaded length0.0 in
-
Overall case length1.0 in
-
Total probe length1.0 m
-
Armor configurationUnarmored
-
Cable construction75 ohm triaxial with FEP insulation
-
Connector packageMiniature coaxial ClickLoc with connector protector
-
Sensing tip diameter8.0 mm
-
Tip materialPolyphenylene sulfide (PPS)
-
Case materialAISI 303 or 304 stainless steel
-
Temperature limits-52 to +177 deg C operating/storage; seal caution below -34 deg C
-
Nominal probe resistance7.59 +/- 0.50 ohm, center to outer conductor
-
Case-to-lead tensile rating330 N maximum rated
-
Approval option05: CSA, ATEX and IECEx; installation conditions apply
View all additional
Alternative Names
330101-00-10-10-01-05 proximity probe
One-inch case unarmored 1 m probe
3300 XL 8 mm protected-connector probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL 8 MM PROXIMITY TRANSDUCER
Match the complete probe and measurement channel
The one-metre probe-only configuration described by Bently Nevada does not use an extension cable, but it still requires the appropriate one-metre Proximitor sensor. A probe alone does not provide the complete system's voltage measurement output.
Read the two 10 fields independently: the case is 1.0 inch long, whereas total probe length is 1.0 metre. For installations using another electrical system length, select the documented cable and Proximitor combination instead of assuming physical connector fit is sufficient.
Maintain the permitted 3/8-24 thread engagement, suitable conductive target and installed gap. This order includes a protector on its standard-cable ClickLoc termination; the 05 selection also requires the applicable certificate and installation conditions to be checked.
Features:
- One-metre systems still need a Proximitor sensor
- Probe length and case length use different units
- Connector protection is included in option 01
The Bently Nevada 330101-00-10-10-01-05 proximity probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the entire order rather than identifying the replacement by the 330101 base alone. The one-inch case, one-metre total length, unarmored cable and protected connector each describe a separate compatibility consideration.
Documented XL/non-XL interchangeability does not preserve the full XL performance specification in a mixed chain. Check the installed sensor, cable arrangement and required accuracy before accepting a component substitution.
The reviewed manufacturer sources did not establish a hardware revision, discontinuation date or exact successor for this complete order. Do not replace missing lifecycle evidence with a guessed version or treat another case length as an approved direct replacement.
Features:
- Preserve both case-length and probe-length selections
- Check the full installed measuring chain
- Validate certification rather than inferring equivalence
The Bently Nevada 330101-00-10-10-01-05 proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330101-00-10-10-01-05 proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330101-00-10-10-01-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Why does 330101-00-10-10-01-05 contain two 10 fields?
The first 10 is the B option for a 1.0-inch overall case; the second is the C option for a 1.0-metre total probe length. They have different units and functions in the ordering table. -
Can this probe form a one-metre system without an extension cable?
The datasheet explicitly identifies a one-metre probe-only system, which does not use an extension cable. It still requires the appropriate one-metre Proximitor sensor; a different sensor length must not be assumed compatible. -
What protects the probe cable mechanically?
This is the unarmored 330101 construction. Its standard cable has FEP insulation, but it must not be described as the armored 330102 version. Plan routing and mechanical protection for the actual installation. -
Does option 01 include the ClickLoc connector protector?
Yes. The official ordering table assigns a miniature coaxial ClickLoc connector, connector protector and standard cable to option 01. The FluidLoc cable configurations use separate options. -
How is the XL connector tightened during installation?
For two 3300 XL gold ClickLoc connectors, Bently Nevada specifies finger tightening. A connection to a non-XL stainless-steel connector has different instructions, so identify both mating connectors before assembly. -
What mounting engagement is allowed for the short case?
For the 3/8-24 thread, the stated maximum engagement is 0.563 inch. The one-inch overall case length does not permit the full case to be threaded into a close-fitting bore. -
Does the 05 suffix prove every hazardous-area installation is acceptable?
No. It identifies the CSA, ATEX and IECEx ordering option. The actual certificate, product marking and applicable installation conditions must still be checked for the supplied unit and complete circuit.
READY TO VERIFY YOUR PART?
Get a 330101-00-10-10-01-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
